Miele M82601 Manual

CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
tripping the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household...

When building in the appliance,
ensure that the vents located at the
front of the appliance are not
blocked, and that there is adequate
ventilation to the rear of the unit
(see illustrations).
Do not cover or block any openings
on the appliance.
This microwave is suitable for
installation into a tall cabinet.
A minimum installation height of 33
7/16 (850 mm) must be maintained.
During transport be sure to lift the
appliance by the housing, not by the
frame. The framework is not sturdy
enough to support...

Installation accessories
(supplied)
Only operate the appliance after it
has been installed into cabinetry.

Mark the center line of the cabinet.Position the fitting bracket on the
center line. Use the mark on the
bracket as a guide.
Installation
43
4 x 16mm
3 

Fit a screwin to the center of the
first long hole.
Check the alignment of the unit, then
fit another screwinto the other
long hole.
Tighten both screws.
Place the appliance in the niche.
Using both hands on the back of the
microwave interior move it into place.
The microwave will engage into
position once it is correctly installed.
Check the alignment.
If it is not aligned correctly, pull the
appliance out of the niche and
realign it by slightly adjusting the
bracket on the long holes.
Once...

45 

46 

47 

M.-Nr. 07 372 781 / 00Alteration rights reserved / 0909
For the most updated manual see the Miele web site.