Miele Kfn 8762 Sed Operating And Installation Instructions
Here you can view all the pages of manual Miele Kfn 8762 Sed Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 11
Do not block the ventilation gaps in the appliance as this would impair the efficiency of the appliance, increase the electricity consumption and could cause damage to the appliance. The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, can lead to the appliance...
Page 12
Normal energy consumptionIncreased energy consumption InstallationIn a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven).Situated near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20 °C.Where there is a high ambient room temperature. Temperature setting with a thermostat which is approximate (set in stages).With a medium setting of 2 to 3. With a high...
Page 13
Normal energy consumptionIncreased energy consumption DefrostingDefrost the freezer when a layer of ice one centimetre thick has built up.A layer of ice hinders the cold from reaching the frozen food, and causes an increase in energy consumption. How to save energy 13
Page 14
Before using for the first time The stainless steel surface has a layer of protective foil to prevent scratching during transportation. ^Do not remove this foil until the appliance has been installed or built in. Start at one of the upper corners. ^Clean stainless steel surfaces with a suitable conditioning agent for stainless steel. ^Clean the inside of the appliance and the accessories with warm water and a little washing up liquid, and then dry with a soft cloth. Important: To ensure the correct...
Page 15
The refrigerator section temperature display goes out and the refrigerator section switches off. To switch the refrigerator section on again ^Press the On/Off button on the left hand side of the control panel again. The refrigerator section temperature display lights up. The refrigerator section starts cooling. The interior light will come on when the door is opened. Safety lock The safety lock can be activated to prevent the appliance being switched off inadvertently. Activating or de-activating the...
Page 16
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. The temperature in the appliance will rise: –the more often the door is opened and the longer it is kept open, – if too much food is stored in it at once, – the warmer the food is which is being put...
Page 17
After setting the temperature you can see the following information in the display by pressing the buttons: –When first pressed, thelast temperature selectedflashes. –Each subsequent press of the button adjusts the temperature shown in 1 °C steps. –Keeping the button pressed in adjusts the temperature continually. Approx. 5 seconds after letting go of the button the currentactual temperature of the refrigerator or freezer section is automatically shown. If you have adjusted the temperature, wait for...
Page 18
Temperature display brightness The appliance is supplied with the brightness of the temperature display set as low as possible. However, if the door is opened, a setting changed or if the alarm is sounding, the temperature display will appear much brighter for approx. 1 minute. You can adjust the level of brightness: ^Press and hold the Super freeze button pressed in for approx. 5 seconds. The Super freeze indicator light flashes and a ;flashes in the temperature display. ^Press one of the temperature...
Page 19
Your appliance has been fitted with a warning system which ensures that the temperature in the freezer section cannot rise unnoticed. An alarm will sound and the freezer section temperature display will flash if the temperature in the freezer section becomes too warm. The temperature the appliance is set at determines the temperature the appliance recognises as being too warm. The alarm will sound and the temperature display will flash, –if the freezer door has been left open for a while, e.g. in order...
Page 20
Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink. ^Press the Super cool button, the Super cool indicator light will come on. The appliance works at full power to lower the temperature in the refrigerator section. Switching off Super cool The Super cool function...