Miele Kf 1901 Vi Operating And Installation Instructions

After cleaning
Return all shelves and accessories.
Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the power outlet
and turn the appliance on.
Switch on the SuperCool function for
the freezer section. The freezer
section will cool down quickly.
Once the temperature in the freezer
section is cold enough, place food in
the freezer baskets and return them
to the freezer.
Changing the light bulb
The lighting automatically switches off
after the door has been...

Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold it with a soft cloth.
Remove the defective light bulb.
Place the new bulb in the socket.
Halogen bulb type:
20 W/12 V/socket GY 6.35.
Slip the rear of the light cover back
into position, then pull it forward and
into place.Side lighting
Turn the light cover counterclockwise
and pull out.
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold it with a soft cloth.

Pull...

The appliance is supplied with a stan
-
dard water filter (bypass cartridge) that
filters the main water supply for making
ice cubes.
This water filter can be replaced with an
active charcoal filter which improves
the taste and smell of ice cubes by
removing chlorine and other
substances from the incoming tap
water.
Additional water filters are available
from Miele.
It is important to change the water
filter regularly.
To avoid serious illness or death, do
not use water that is
microbiologically or...

Exchanging the water filter
Note: Air trapped in the system may
cause water and the filter cartridge
to eject forcefully. Use caution when
removing.
Push in and rotate the filter cap on
the base panel of your appliance
counterclockwise 180°,1.
Pull the used filter cartridge out of the
appliance,2.Remove the cap from the used filter,
3.
Take a new filter cartridge out of the
packaging and remove the protective
cap.
Push the cap onto the new filter
cartridge,4.

Push the filter cartridge with cap, in...

After the filter change the filter
indicator in the display still flashes.
The change must be be confirmed in
the electronic.
Confirming the filter change
Press and hold the filter change
sensor button.
At the same time place a finger on
the access button. Press and hold
both sensor buttons for approx. 5
seconds until a beep is heard.
The water filter change has been
confirmed and the filter change
indicator had been reset.
The filter change indicator goes out.

Close the door.
After installing a new...

Water filter
36
State of California
Department of Public Health
Water Treatment Device
Certificate Number
Date Issued:  March 10, 2006
T
rademark/ModelDesignationReplacementElements
Date Revised:  April 3, 2008
177506 -
9000 077095 9000 077104
Miele 07134220 07134220
Manufacturer:Cuno, Incorporated
T
hewatertreatment device(s)listedonthiscertificatehavemetthetestingrequirements pursuant toSection116830of theHealth andSafetyCodefor thefollowinghealth related contaminants:
Cysts
TurbidityNone
None M...

Water filter
37
To a capacity of 739.68 gallons (2800 liters).
* Based on the use of Cryptosporium parvum oocysts
Performance Data Sheet For Filter Model 07134220
System tested and certified by NSF International in Model 07134220 
against NSF/ANSI Standard 53 for the reduction of Cysts and 
Turbidity and against Standard 42 for the reduction of Chlorine Taste 
and Odor; Nominal Particulate Class I.
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances...

This product KF 1801 Vi, KF 1811 Vi (KIMBM30US) / KF 1901 Vi, KF 1911 Vi
(KIMBM36US) is tested and certified by WQA against ORD0902 for California
lead free compliance.
Miele & Cie. KG
Carl-Miele-Straße 29
D-33332 Gütersloh
Lead free certificate
38
 

With the aid of the following guide minor problems can be corrected without a ser
-
vice call.
Repairs should only be carried out by a qualified and trained person in strict
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage and may void the warranty.
Problems with temperature
Issue Possible fault Solution
The refrigerator
or freezer
section does
not get cold.The machine is not
turned on.Check whether the appliance is
switched on at...

Problems with temperature
Issue Possible fault Solution
The freezer section is
too warm.The room temperature is
lower than the ambient
temperature for which the
appliance is designed.Raise the temperature of
the room.
Operating the appliance
in a room that is too cold
will cause the cooling
system to switch off for
too long, causing the
freezer section to become
too warm.
The temperature display
for the freezer shows
-18°C, although I have
set a higher
temperature.This is not a fault. If the ice maker is...