Miele Kf 1901 Vi Operating And Installation Instructions
Here you can view all the pages of manual Miele Kf 1901 Vi Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 21
When the SuperCool function is activated, the appliance is cooled as quickly as possible (to a factory-preset temperature). SuperCool When used with therefrigeratorthe SuperCool function is ideal for the rapid cooling of drinks and refrigerating large quantities of food. When used with thefreezerthe SuperCool function is ideal for freezing large quantities of unfrozen food. The function should be switched on4-6 hoursbefore the fresh food is placed in the freezer. If the max. freezing capacity is used, 24...
Page 22
For the automatic ice cube maker to operate, it must be connected to the household water supply. See Plumbing. Turning on the ice cube maker Make sure that the ice cube container is under the ice cube maker, as far as possible. Ice cubes will not be produced unless the container is completely closed. Touch the sensor button for the ice cube maker so that it turns yellow. As soon as the freezer has cooled to a freezing temperature, the ice cube container fills with water. Cold air is blown directly over...
Page 23
Refrigerator section and SmartFresh drawers The refrigerator and SmartFresh drawers defrost automatically. During normal operation, condensate and frost can form on the rear wall of the refrigerator and drawers. You do not need to remove this build-up, it will defrost and evaporate automatically with the heat generated by the appliance. Freezer section The freezer section defrosts automatically. The moisture generated in the appliance collects in the evaporator. It is automatically defrosted and...
Page 24
Moving the shelves The shelves can be adjusted according to the height of the food. Using both hands, grasp the shelf from underneath and lift slightly so that the rear of the shelf is slightly above the mountings. Pull the shelf forward. Move the shelf to the desired height, then insert the (rear) hooks into place. Make sure the shelf is level. Floating drawer The floating drawer can be moved to the left or right, moved to another shelf, or removed. Pull the drawer straight out, so that it passes...
Page 25
The divider in the drawer can also be removed for cleaning. Remove the drawer. Lift the divider upward and out. To re-insert the divider, slide it back down along the tracks. Important:If the divider is not in place, the SmartFresh drawer will not work properly. Replacing the SmartFresh drawer Completely extend the telescopic tracks. Lay the drawer on the tracks so that it connects in the front and back. Turn the safety lock back to the vertical position. Slide the drawer in. Adjusting the interior...
Page 26
Adjusting the door shelves For easier loading, unloading, and cleaning, the door shelves can be shifted or completely removed. Using both hands, grasp the door shelf by the frame and tip it slightly forward. Slide the tipped shelf up or down along the slide-rails, and click it into place with the lower hooks. Make sure the shelf is level. Removing a door shelf Slide it upward all the way to the top of the slide-rails, until it can be removed. Replacing a door shelf Start at the top of the...
Page 27
Ice cube container The ice cube container is set on telescopic tracks, and can be removed for loading, unloading and cleaning. Slide the container forward until resistance is felt. On both sides of the container, pull the latches (see arrow) upward and lift the container out of the freezer. Push the tracks back into the freezer to avoid injury. Replacing the ice cube container Completely extend the telescopic tracks. Lay the container onto the tracks so that it connects in the front and back. Slide...
Page 28
To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance. Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. Non-abrasive cleaning agents are also unsuitable, as they can cause matte areas to appear. Only use a mild solution of warm water and liquid dish soap to clean this appliance. Do not use a steam...
Page 29
Before cleaning Use the main switch to turn the appliance off completely. The main switch is located on the right side underneath the control panel. Unplug the power cord. Remove any food from the appliance and store it in a cool place. Take out any removable parts, e.g., shelves. Cleaning the interior and accessories Use a mild solution of warm water and liquid dish soap. Wash all accessories and drawers by hand. Do not wash in a dishwasher. Clean the appliance as needed. After washing, wipe...
Page 30
Humidity filters The two humidity filters, located above the SmartFresh drawers, must be removed for cleaning. Remove the SmartFresh drawer. Unhook the filter cover,1.in each side of the drawer and remove them along with the filter mat downwards starting from2. Remove the filter mat.Clean the filters by rinsing them with lukewarm water. Do not clean in a dishwasher or washing machine. This will damage the filter. Air-dry the filters. Place the filters back in the filter cover. Put the filter...