Miele K12020s1 Manual
Have a look at the manual Miele K12020s1 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 49
Installation49Appliance dimensionsA [mm]B [mm]C [mm]D [mm]E [mm]F [mm]K 12010 S-2850554610*6231129601K 12012 S-2850554610*6231129601K 12012 S-3850554610*6231129601K 12020 S-1850600615*6281175649K 12022 S-1850600615*6281175649K 12023 S-2851602615*6281175650K 12023 S-3851602615*6281175650K 12024 S-3851602615*6281175650
* Dimensions without wall spacers fitted. The appliance depth is increased by35 mm with the wall spacers supplied fitted.](http://img.usermanuals.tech/thumb/51/98419/w64_k12020s1-manual-1509236341_d-48.png "Page 49
Installation49Appliance dimensionsA [mm]B [mm]C [mm]D [mm]E [mm]F [mm]K 12010 S-2850554610*6231129601K 12012 S-2850554610*6231129601K 12012 S-3850554610*6231129601K 12020 S-1850600615*6281175649K 12022 S-1850600615*6281175649K 12023 S-2851602615*6281175650K 12023 S-3851602615*6281175650K 12024 S-3851602615*6281175650
* Dimensions without wall spacers fitted. The appliance depth is increased by35 mm with the wall spacers supplied fitted.")
Changing the door hinging510003Fit the appliance door from below uponto the upper hinge pin 0006 and thenclose the door.0003Fit hinge bracket 0004 from below intothe lower door bearing and screw iton tight.0003The appliance door can be alignedusing the long slots in the hingebracket. Make sure you havetightened all screws up properly! Changing the hinging of thefreezer compartment door0003Open the freezer compartment door0007.0003Flip the cover on bearing block 0004down.0003Unscrew bearing block 0005 and takeoff the freezer compartment door 0007together with the bearing block.0003Unscrew door catch 0006.
Changing the door hinging520003Screw door catch 0006 into place on theopposite side, having turned it by180 °C.0003Plug the holes with stoppers 0008 sup-plied.0003Fit bearing block 0005 together withfreezer compartment door 0007 in posi-tion at the top 0009, then tighten bear-ing block 0005 securely. 0003Flip the cover on bearing block 0004back up.Changing over the door handle0003Carefully remove cover 0004 and stop-pers 0005 from the sides.0003Slide cover 0007 over to the left andthen insert a suitable plastic orwooden tool 0006 into the gap on theright hand side. 0003Carefully lever cover 0007 off.Be careful not to let the tool slipout and damage the appliance sur-face.
Changing the door hinging530003Loosen screws 0008 from the handleside and in the middle and then takethe handle 0009 off.0003Turn the handle 180° and refit it onthe opposite side.0003First screw in at the side and then inthe middle 000A.0003Refit cap 0004 and stoppers 0005 on theopposite side.0003Refit the middle cover 0007 by pressingit in, first on the left-hand side andthen on the right-hand side.
Building under54The appliance can be pushed under aworktop. If this is done, the appliancelid has to removed.If the ventilation gaps given arenot observed, the compressor willrun more frequently and for longerperiods.This will result in increased energyconsumption and a higher operatingtemperature for the compressor. Thismay, in turn, cause damage to thecompressor.A ventilation gap of at least 140 cm2must be provided in the worktop. If your appliance is supplied with wallspacers these must not be used if theappliance lid has been removed (see"Installation"). With a building-under depth of 600mm, any back mould on the worktopmust not exceed 10 mm in depth.Make sure that the socket and on/offswitch are accessible after installa-tion.0003To remove the lid unscrew screws 0004from the back of the appliance.0003Lift the appliance lid up at the backand then pull it forwards to remove it.
United KingdomMiele Co. Ltd.Fairacres, Marcham RoadAbingdon, Oxon, OX14 1TWCustomer Contact Centre Tel: 0330 160 6600E-mail: [email protected]: www.miele.co.uk AustraliaMiele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 3981 Gilbert Park Drive, Knoxfield, VIC 3180Tel: 1300 464 353Internet: www.miele.com.au Miele (Shanghai) Trading Ltd.1-3 Floor, No. 82 Shi Men Yi RoadJing' an District200040 Shanghai, PRCTel: +86 21 6157 3500, Fax: +86 21 6157 3511E-mail: [email protected], Internet: www.miele.cn China41/F - 4101, Manhattan Place23 Wang Tai RoadKowloon Bay, Hong KongTel: (852) 2610 1025, Fax: (852) 3579 1404Email: [email protected]: www.miele.hk Miele (Hong Kong) LimitedMiele India Pvt. Ltd.Ground Floor, Copia Corporate SuitesPlot No. 9, Jasola, New Delhi - 110025Tel: 011-46 900 000, Fax: 011-46 900 001E-mail: [email protected], Internet: www.miele.in IndiaMiele Ireland Ltd.2024 Bianconi AvenueCitywest Business Campus, Dublin 24Tel: (01) 461 07 10, Fax: (01) 461 07 97E-Mail: [email protected], Internet: www.miele.ie IrelandMalaysiaMiele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768 Miele New Zealand LimitedIRD 98 463 631Level 2, 10 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele.co.nz New ZealandMiele Pte. Ltd.163 Penang Road# 04 - 03 Winsland House IISingapore 238463Tel: +65 6735 1191, Fax: +65 6735 1161E-Mail: [email protected]: www.miele.sg SingaporeMiele (Pty) Ltd63 Peter Place, Bryanston 2194P.O. Box 69434, Bryanston 2021Tel: (011) 875 9000, Fax: (011) 875 9035E-mail: [email protected]: www.miele.co.za South AfricaMiele Appliances Ltd.Gold & Diamond ParkOffice No. 217-6, Sheikh Zayed RoadP.O. Box 11 47 82 - DubaiTel. +971 4 3044 999Fax. +971 4 3418 852800-MIELE (64353)E-Mail: [email protected]: www.miele.ae United Arab EmiratesCarl-Miele-Straße 29, 33332 Gütersloh, GermanyManufacturer:Miele & Cie. KG
M.-Nr. 09 552 430 / 01en-GBK 12010 S-2, K 12012 S-2, K 12012 S-3, K 12020 S-1, K 12022 S-1,K 12023 S-2, K 12023 S-3, K 12024 S-2000B