Miele K12020s1 Manual

Changing the door hinging510003Fit the appliance door from below uponto the upper hinge pin 0006 and thenclose the door.0003Fit hinge bracket 0004 from below intothe lower door bearing and screw iton tight.0003The appliance door can be alignedusing the long slots in the hingebracket. Make sure you havetightened all screws up properly!
Changing the hinging of thefreezer compartment door0003Open the freezer compartment door0007.0003Flip the cover on bearing block 0004down.0003Unscrew bearing block 0005 and...

Changing the door hinging520003Screw door catch 0006 into place on theopposite side, having turned it by180 °C.0003Plug the holes with stoppers 0008 sup-plied.0003Fit bearing block 0005 together withfreezer compartment door 0007 in posi-tion at the top 0009, then tighten bear-ing block 0005 securely.
0003Flip the cover on bearing block 0004back up.Changing over the door handle0003Carefully remove cover 0004 and stop-pers 0005 from the sides.0003Slide cover 0007 over to the left andthen insert a suitable...

Changing the door hinging530003Loosen screws 0008 from the handleside and in the middle and then takethe handle 0009 off.0003Turn the handle 180° and refit it onthe opposite side.0003First screw in at the side and then inthe middle 000A.0003Refit cap 0004 and stoppers 0005 on theopposite side.0003Refit the middle cover 0007 by pressingit in, first on the left-hand side andthen on the right-hand side.   

Building under54The appliance can be pushed under aworktop. If this is done, the appliancelid has to removed.If the ventilation gaps given arenot observed, the compressor willrun more frequently and for longerperiods.This will result in increased energyconsumption and a higher operatingtemperature for the compressor. Thismay, in turn, cause damage to thecompressor.A ventilation gap of at least 140 cm2must be provided in the worktop.
If your appliance is supplied with wallspacers these must not be used...

United KingdomMiele Co. Ltd.Fairacres, Marcham RoadAbingdon, Oxon, OX14 1TWCustomer Contact Centre Tel: 0330 160 6600E-mail: [email protected]: www.miele.co.uk
AustraliaMiele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 3981 Gilbert Park Drive, Knoxfield, VIC 3180Tel: 1300 464 353Internet: www.miele.com.au
Miele (Shanghai) Trading Ltd.1-3 Floor, No. 82 Shi Men Yi RoadJing' an District200040 Shanghai, PRCTel: +86 21 6157 3500, Fax: +86 21 6157 3511E-mail: [email protected], Internet:...

M.-Nr. 09 552 430 / 01en-GBK 12010 S-2, K 12012 S-2, K 12012 S-3, K 12020 S-1, K 12022 S-1,K 12023 S-2, K 12023 S-3, K 12024 S-2000B