Miele K 14827 Operating And Installation Instructions

Different storage zones
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
the different zones when placing food
in the appliance.
This appliance has automatic
DynamicCooling, which helps to
keep an even temperature when the
fan is running. For this reason, the
difference between the various
zones is less pronounced.
Warmest area
The warmest area is in the top...

Food which should not be
stored in a refrigerator
Not all food is suitable for refrigeration.
This includes:
–Fruit and vegetables which are
sensitive to cold, such as bananas,
avocado, papaya, passionfruit,
aubergines, peppers, tomatoes and
cucumbers
–Fruit which is not yet ripe
–Potatoes
–Some hard cheeses, e.g. Parmesan
When shopping for food
The freshness of food when first placed
in the appliance is an important factor
in determining how long it stays fresh,
and how long it can be kept in the...

For every type of food, there are ideal
storage conditions to ensure it stays
fresh as long as possible, retaining
both flavour and vitamins.
The important factors for this are the
storage temperature and the humidity.
The correct combination of temperature
and humidity is a unique feature of the
PerfectFresh zone. Food can be stored
for up to three times longer in the
PerfectFresh zone than in a standard
refrigerator.
Storage temperature
The optimum storage temperature for
fresh food which is not...

Always keep these foodscovered or
wrapped.
Exception: Meat.The surface of the
meat dries out slightly, helping to
prevent the growth of bacteria, which
results in the meat lasting longer. To
prevent the risk of bacterial
cross-contamination and meat
deteriorating, do not let one type of
meat come into direct contact with
another type.
Humidity-controlled compartment
The humidity-controlled compartment
has a regulator which is used to adjust
the relative humidity. Slide the regulator
to the relative...

Moving the shelves
The shelves can be adjusted according
to the height of the food.
^Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
In order to accommodate tall items in
the appliance, one of...

PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.
^Pull out the compartment as far as it
will go, and then lift it up and out.
Push the runners back in again to
avoid injury or damage.
^Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
^To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
To replace the...

Universal container
(depending on model)
The universal container can be used
both to store and serve food.
It consists of a deep trayaand a
shallow trayb. Both trays fit the
stainless steel frame.
If you wish to use the universal
container to serve food,
^place the shallow traybin the
stainless steel frame, and use the
deep tray as a lida.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
Moving the bottle divider
(depending on model)
The bottle divider...

Refrigerator section and
PerfectFresh zone
The refrigerator section and the
PerfectFresh zone defrost
automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
and the PerfectFresh zone whilst in use.
You do not need to remove this, as it
will defrost and evaporate automatically
with the warmth generated by the
appliance.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
Ensure that the condensate...

A range of Miele branded cleaning
and conditioning agents is available
from the Miele Spare Parts
Department, or via the internet at
www.miele-shop.com (depending on
country).
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable as they can cause
matt areas to appear.
For stainless steel surfaces, use a
suitable stainless steel conditioning
agent.
Make sure that no water can
penetrate into the...

^After cleaning, stainless steel
surfaces should be treated with a
conditioning agent for stainless steel.
It is important to do this every time
the stainless steel surfaces are
cleaned, as the stainless steel
conditioner protects the surfaces
and helps prevent re-soiling.
Ventilation gaps
^The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seal
Do not use any oils or grease on the
door seal as...