Miele K 121 Ui Operating And Installation Instructions
Have a look at the manual Miele K 121 Ui Operating And Installation Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 29
Fitting the plinth
To ensure trouble-free operation of
the appliance it is essential to fit the
original Miele ventilation grille.
Remove ventilation grilleby
pressing down the two lugsand
simultaneously pulling the grille
forwards.
The plinth facingcan be fitted
without being altered in the following
situations:
It can be fitted unchanged if the
following dimensions are present:
Building-under
height
A
[mm]Plinth facing
height
b
[mm]
820 100
870 150
The height of the plinth facing has to
be altered...](http://img.usermanuals.tech/thumb/51/57458/w64_miele_k_121_ui-operating-and-installation-instructions-28.png "Page 29
Fitting the plinth
To ensure trouble-free operation of
the appliance it is essential to fit the
original Miele ventilation grille.
Remove ventilation grilleby
pressing down the two lugsand
simultaneously pulling the grille
forwards.
The plinth facingcan be fitted
without being altered in the following
situations:
It can be fitted unchanged if the
following dimensions are present:
Building-under
height
A
[mm]Plinth facing
height
b
[mm]
820 100
870 150
The height of the plinth facing has to
be altered...")
Fitting a furniture door If there are no pre-drilled holes in the furniture door, holes have to be drilled as shown on the following drawing: Drilling positions on framed doorsRemove screwsfrom the underside of the appliance door. Use the screws to secure both bracketsto the underside of the appliance door. The brackets must be flush with the exterior of the appliance door. Shorten the brackets if necessary. Installing the appliance 31
Screw adjuster stripto the furniture door. Loosen the adjusting screwsuntil there is a gap of 3.5 mm (see detail). Hang the furniture door onto adjusting screws. Secure the furniture door at the top using screws. Secure the furniture door at the bottom using two screwsfitted through the bracket. Aligning the furniture door Align the furniture door with neighbouring furniture doors: – Height adjustment Yis made by turning the upper adjusting screw. – Side adjustments Xare made by moving the furniture door to the left or right. – Depth adjustments Zare made by gently shifting the furniture door forwards or backwards. First tighten the top adjusting screws and, then the lower screws. Finally replace coversand. Installing the appliance 32
Alteration rights reserved / 3410 K 121 Ui (-1)M.-Nr. 07 371 501 / 03