Home > Miele > Fridge freezer > Miele K 12012 S Operating And Installation Instructions

Miele K 12012 S Operating And Installation Instructions

Here you can view all the pages of manual Miele K 12012 S Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.

Page 41

The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
^Close the door.
^
Unscrew lower hinge bracketa, and
remove.
^
Then lift the door down and off.
^
Take hinge pinbout of hinge
bracketa, then refit in the other hole
of the hinge bracket.
^
Remove covercand use it to cover
the now empty holes on the opposite
side.
^
Unscrew upper hinge pindand refit
it on the other side.
^
Take care not to lose the washer.^Remove the cover at the top left of...

Page 42

Changing the freezer
compartment door
^Lower the cover on hinge platea.
^Unscrew hinge plateb, and remove
freezer compartment doorc
together with the hinge plate.
^Unscrew door catchd.
^
Turn door catchdby 180°, and
screw into place on the opposite
side.
^
Fit freezer compartment doorcin
position at the tope, then tighten
hinge platebsecurely.
^
Close the cover on hinge platea.
Plug the holes with stoppersf
supplied.
Changing over the door handle
^Carefully remove coveraand
stoppersbfrom the sides using...

Page 43

^Turn the handle 180° and fit to the
opposite side.
^First screw it at the side and then in
the middleg.
^In the same way, replace covera
and stoppersbon the opposite
side.
^Refit middle covercby pushing it in,
first on the left hand side, and then
on the right.
Changing the door hinging
43
 

Page 44

The appliance can be pushed
underneath a worktop run. If this is
done, then the top lid to the appliance
may need to be removed.
When placed under a worktop run it
is essential that adequate ventilation
is provided at the rear of the
appliance. A ventilation gap of at
least 140 cm
2must be made in the
worktop.
With a building under depth of
600 mm, any backmould must not
exceed 10 mm in depth.
Make sure that the socket and on-off
switch are easily accessible after the
appliance has been pushed
underneath...

Page 45

45
 

Page 46

46
 

Page 47

47
 

Page 48

Alteration rights reserved / 0812
K 12010 S-2, K 12012 S-2, K 12020 S-1, K 12022 S-1, K 12023 S-2, K 12024 S-2M.-Nr. 09 290 810 / 00
 
Start reading Miele K 12012 S Operating And Installation Instructions

Related Manuals for Miele K 12012 S Operating And Installation Instructions

All Miele manuals