Miele H 6860 Bp Manual

Controls
21
0001Recessed On/Off sensor 
For switching on and off
0002Display
Displays time of day and information for operation
0003 sensor
For setting the minute minder
0004 sensor
For switching the oven interior lighting on and off
0005 sensor
For going back one step at a time
0006Optical interface
(for Miele service technician use only)  

Controls
22
On/Off sensor 
The On/Off sensor  is recessed and reacts to touch.
It is used for switching the oven on and off.
Sensor controls
The sensors react to touch. Each touch is confirmed with a keypad tone. This
keypad tone can be switched off (see "Settings – Volume – Keypad tone").
SensorFunctionNotes
For activating and
deactivating the
minute minder /
alarmIf a menu is showing in the display or if a cooking
process is running, you can enter a minute minder
duration (e.g. when boiling...

Controls
23
Touch display
The display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the display with your finger tips.
Touching the display with your finger creates a tiny charge which releases an
electrical impulse. This impulse is recognised by the display.
The display is split into three sections.
The menu path appears at the top left and shows you which menu or sub menu
you are in. Options within a menu are separated by a vertical line. If there is not
enough space to show the...

Controls
24
Main menu
Functions
 Automatic programmes
 Special applications
 MyMiele
 User programmes
 Settings
 Maintenance
Symbols
The following symbols may appear in the display:
SymbolExplanation
0003Some settings, e.g. display brightness and buzzer volume are
selected using a bar chart.
This symbol indicates that there is additional information and
advice about using the oven. Select OK to access the
information.
The system lock or sensor lock is switched on (see "Settings –...

Controls
25
Operation
Each time you touch a possible option the relevant field lights up orange.
To select or open a menu
0004Touch the field you want once with your finger.
Scrolling
You can scroll left or right.
0004Swipe the screen, i.e. place your finger on the touch display and swipe it in the
direction you want.
0004Or: touch the  or  arrows to scroll from left to right.
Exiting a menu
0004Touch  or touch an option in the menu or touch … .
Depending on which menu you are in, this will take you...

Controls
26
Entering numbers
You can enter numbers by swiping and touching the roller or via the numerical
keypad.
To enter numbers using the roller:
0004Swipe the roller up or down to select the number you want.
To enter numbers using the numerical keypad:
0004Touch  in the bottom right of the input field.
The numerical keypad will appear.
0004Touch the numbers you want.
Once you have entered an accepted value the OK sensor will light up green.
The last input figure can be deleted using the arrow....

Features
27
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Data plate
The data plate is located on the front
frame, visible when the door is open.
The data plate states the model number
of your oven, the serial number as well
as connection data (voltage, frequency
and maximum connected load).
Please have this information to hand,
should you need to contact Miele
regarding any questions or problems.
Items supplied
The oven is supplied with:
–the...

Features
28
Side runners
Side runners for trays, racks and Miele
oven dishes are fitted on either side of
the oven cavity for shelf levels .
The numbers for the shelf levels are
marked on the front frame.
Each level consists of two rails, one
above the other.
The accessories (e.g. the rack) are
pushed into the oven between the two
rails.
FlexiClip telescopic runners (depending
on model) are fitted on the lower rail.
The side runners can be removed for
cleaning (see "Cleaning and care").
Baking...

Features
29
FlexiClip telescopic runners HFC 72
The FlexiClip telescopic runners can be
used with any shelf level.
Push the FlexiClip telescopic runners
right into the oven before placing
accessories on them.
The accessories will then
automatically sit securely in between
the stoppers at either end of each
runner and be prevented from sliding
off.
The FlexiClip runners can support a
maximum load of 15 kg.
Fitting and removing FlexiClip
telescopic runners
Danger of burning.
Make sure the oven heating...

Features
30
0004Then secure the FlexiClip runner to
the lower of the two rails as illustrated
(3).
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
To remove a FlexiClip runner:
0004Push the FlexiClip runner in all the
way.
0004Remove the FlexiClip runner by
raising it at the front (1) then pulling it
forwards along the rail and out (2).
Round baking tray HBF 27-1
The round baking tray is suitable for
cooking pizza, shallow cakes...