Miele H 5461 B Manual

Time
The options are:
–Display
–Clock format
–Set
If there is a power cut, the current
time of day will reappear once
power has been restored. The
appliance will store this data for
approx. 200 hours. After 200 hours it
will show 12:00 and will need to be
re-set.
Display
Select how you want the time to appear
in the display when the oven is
switched off:
–On
(Factory default)
The time of day will always show in
the display.
– On for 60 seconds
The time will only show for 60
seconds if the,or OK sensor...

Lighting
–On
The oven interior lighting remains on
during the entire cooking
programme.
–On for 15 seconds
(Factory default)
During a cooking programme, the
oven interior lighting is set to switch
off after 15 seconds.
It will come on again during the
cooking programme if,or OK is
touched.
Catalyser
–On
(Factory default)
The catalyser is always switched on.
– Off next prog. only
The catalyser will be switched off for
the next programme only.
Cooling fan run-on
The cooling fan will continue to run for...

Pyrolytic
–With reminder
A reminder to carry out the pyrolytic
cleaning process will appear in the
display.
–Without reminder
(Factory default)
You will not be reminded to carry out
the pyrolytic cleaning process.
Heating phase
The heating phase can be changed
with the Fan plus, Conventional
heatand Auto roastfunctions.
– Rapid
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
– Normal
Only the heating...

Keypad tone
The keypad tone is represented by a
bar with seven segments, where one
segment is filled in.
Factory default:
To change the setting, move the solid
segment to the left or right with theor
sensor.
If none of the segments is filled in, the
keypad tone is switched off.
Frequency
The frequency of the buzzer can be
changed. Changing the frequency may
be necessary to optimise the volume in
different installation environments.
The frequency level is represented by a
bar with...

Temperature format
–°C
(Factory default)
–°F
Showroom programme
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
Do not activate this setting for domestic
use!
– Off
(Factory default)
– Demo programme
Follow the prompts in the display to
switch the demo programme on.
To switch the demo programme off
If you have switched on the demo
programme inadvertently, follow the
steps below to switch it off again:

Select Settings.

Select the Showroom prog....

Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
or via the internet on
www.miele-shop.com.
Do not use a steam cleaner to
clean the appliance. The steam
could reach electrical components
and cause a short circuit.
Appliance front
Remove any soiling immediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a...

Accessories
Remove all accessories as well as
the runners and any extra
accessories such as FlexiClip
runners from the oven interior before
starting the pyrolytic cleaning
process.
The high temperatures needed for
pyrolysis will damage the
accessories.
Baking tray, universal tray,
anti-splash insert (if applicable)
The surface has been treated with
PerfectClean enamel.
Please refer to the section on
PerfectClean for information on
cleaning and care.
Rack, runners
The surface has been treated with...

PerfectClean
The following have been treated with a
special finish called PerfectClean:
–baking tray
–universal tray
–anti-splash insert (if applicable)
PerfectClean surfaces have very good
anti-stick propertiesand aremuch
easier to keep cleanthan conventional
oven enamel, if cleaned regularly.
Food can be lifted off more easily, and
soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
PerfectClean...

After cleaning, rinse thoroughly with
clean water to remove any residual
cleaning agents as these can
diminish the anti-stick properties.
Normal soilingshould be cleaned as
soon as possible after each use with a
soft sponge and a solution of hot water
and a little washing up liquid. The
longer soiling is left, the harder it may
become to remove.
If necessary, the souring pad on the
back of a non-scratch washing-up
sponge or a soft nylon brush can be
used.
You may find it easier to clean the oven
trays if...

Oven interior
The oven interior is coated with dark
pyrolytic enamelwhich facilitates
cleaning.
This is a particularly hard enamel with
an extremely smooth surface and very
good anti-stick properties.
Manual cleaning of the oven interior
Allow the oven to cool down before
cleaning by hand.
Danger of burning!
The oven interior and the inside of
the door should be cleaned after
each use. If this is not done
subsequent soiling from baking and
roasting will become worse and
make cleaning harder. In extreme...