Miele G 832 Sc Manual

							User Maintenance
Instructions
To prevent accidents
and machine damage,
read these instructions
beforeinstallation or use. 
						

							Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
The filter system should be cleaned ev
-
ery 4 - 6 months or whenever a foreign
object is trapped.
Cleaning the filter in the wash
cabinet
^
Turn off the dishwasher before clean-
ing.
^
Turn the handle counterclockwise to
release the triple filter system.^Lift the filter out of the machine. Re-
move any solid particles and rinse
under running water. Scrub with a ny-
lon brush if necessary.
42 
						

							To clean the underside of the filter, the
flap must be opened:
^Pull back the yellow clip.
^Rinse all parts under running water.
Scrub with a nylon brush if neces-
sary.
^Close the flap so that the clip en-
gages.^Return the filter so it lies flat in the
base of the wash cabinet.
^Lock the filter by turning the handle
clockwise.
,The dishwasher must not be
used without the filter locked in
place.
43 
						

							Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^Turn off the dishwasher before clean
-
ing.
Remove the spray arms as follows:
^Remove the cutlery tray (if present).
^Press the top
spray arm upwards to
engage the inner ratchet and un
-
screw the spray arm.
^
Lift up the middle
spray arm,a, to
engage the ratchet and unscrew the
spray arm,b.^Remove the lower basket.
^Pull the lower
spray arm firmly up-
wards to remove.
^
Use a pointed object such as a tooth-
pick to push food particles into the
spray arm jets.
^
Rinse thoroughly under running wa-
ter.
^
Return the spray arms and check
that they rotate freely.
44 
						

							Cleaning the wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of dish
-
washer detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or the Miele Technical Service
Department.
Cleaning the door and door
seal
^Wipe the door seal with a damp cloth
to remove any food particles.
^Food residue and spilt liquids should
be wiped from the sides of the dish-
washer door. These are outside of the
wash cabinet and are not cleaned by
water from the spray arms.
Cleaning the exterior
,Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dishwasher.
They will
damage the surface.
Plastic
All plastic surfaces and the control
panel can be cleaned with warm water
and liquid dish soap applied with a soft
sponge.
Wipe dry using a soft cloth.
,Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discolored
or damaged if not cleaned regularly.
Do not use a stainless steel cleaner on
the knobs or buttons.
Wood
Panels made from wood should be
cleaned using a soft damp cloth and an
appropriate wood cleaner.
45 
						

							Cleaning the water inlet filter
A filter is incorporated in the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard, or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
Installing an in-line water filter
^If your water contains a large number
of insoluble substances, a filter be
-
tween the water valve and the intake
hose connection is recommended.
These filters can be purchased from
Miele’s Technical Service Depart-
ment.,The plastic valve housing on the
intake hose contains electrical com
-
ponents and should not be im
-
mersed, or run through water.
Cleaning the filter:
^Disconnect the dishwasher from
electricity (unplug it or trip the cir
-
cuit breaker).
^Turn off the water valve.
^Unscrew the intake hose.
^
Carefully remove the rubber seal.
^
Remove the filter using a needle nose
plier and rinse under running water.
^
Return the filter and seal. Make sure
they are seated correctly.
^
Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
^
Slowly turn on the valve and test for
leaks.
46 
						

							Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^Turn off the dishwasher.
^Remove the triple filter (see Cleaning
the filter in the wash cabinet).
^Use a jug or bowl to scoop water out
of the wash cabinet.
^
Tilt the locking clamp to the side.^Pull out the non-return valve and
rinse well under running water.
The drain pump is beneath the non-re-
turn valve (see arrow).
^
Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^
Carefully refit the non-return valve
and secure it with the locking clamp.
^
Refit and lock the filter in place.
47 
						

							Alterations rights reserved (G 832 Plus) / 001 4001
This bio-friendly paper was bleached without the use of chlorine.