Miele G 5570 Operating Instructions

Poor cleaning results
Problem Possible fault Solution
The dishes are not
clean.The dishes were not
loaded correctly.See Loading the
dishwasher.
The program was not
powerful enough.Select a more intensive
program (see Program
Guide).
Stubborn but normal
soiling (e.g. coffee, tea).Use the function Adjust
Sensor Wash (depending on
model, see Settings).
Not enough detergent was
dispensed.Use more detergent, or
change the detergent.
The spray arms are
blocked.Turn the spray arms and
rearrange the dishes if...

Problem Possible fault Solution
Dishes are not dry,
glasses and
cutlery are
spotted.The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling (see Rinse aid).
Dishes were taken out too
soon.Leave dishes in longer (see
Use).
A Tab product was used.
These products have a low
drying effect.Change the detergent, or
refill the rinse aid (see Rinse
aid).
White residue is
visible on cutlery
and dishes....

Problem Possible fault Solution
Glasses have a
brown or blue
discoloration; film
cannot be wiped off.Detergent deposits. Change detergent right
away.
Glasses are dull and
discolored; film
cannot be wiped off.Glasses are not dishwasher
safe. The surface is
affected.There is no remedy.
Only use dishwasher safe
glasses.
Tea or lipstick stains
have not been
completely removed.The wash temperature of
the selected program was
too low.Select a program with a
higher wash temperature.
The detergent has a low...

Repairs
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
Please quote the model type and
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles...

To transport the dishwasher, e.g. when
moving to a new home, note the
following:
–Empty the dishwasher.
–Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
–Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
Transport
55
 

56
 

User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
 

Check and clean your dishwasher
regularly. This will help avoid faults
and problems.
Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonium cleaners should not be
used on the dishwasher.
Theywilldamage the surface.
Wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or online at www.mieleusa.com.
Door and the door seal
Wipe the...

Indicator reflector
The reflector of the optical interface is
located in the steam deflector beneath
the counter top.
Clean as necessary with a damp
cloth.
Control panel
Clean the control panel as necessary
with adamp cloth.
The appliance front and controls
are not scratch proof.
Remove spills immediately.
Cleaning and Care
59
 

Triple filter system
The triple filter system in the base of the
wash cabinet retains coarse dirt from
the suds solution, preventing it from
reaching the circulation system and
re-entering the cabinet through the
spray arms.
The dishwasher must not be
used without all the filters in place.
Collection of coarse dirt may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on your
household use.
The message
Check filterswill appear
in the...