Miele G 5100 Operating Instructions

User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
 

Check and clean your dishwasher
regularly. This will help avoid
problems and faults.
Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonia based cleaners should not
be used on the dishwasher.
Theywilldamage the surface.
Wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or online at www.mieleusa.com.
Door and the door seal
Wipe...

Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones). During normal use, the
filter system is self-cleaning.
The machine must not be used
without all the filters in place!
Check and clean the filter system
periodically for any trapped or
foreign objects.
The level of soiling and time it takes
before the filters need cleaning will...

To clean the inside of the filter, the flap
must be opened.
Push the clips togetherand open
the flap.
Rinse under running water.
Close the flap so that the clip
engages.Return the filter so it lies flat in the
base of the wash cabinet.
Lock the filter by turning the handle
clockwise.
The triple filter system must be
inserted and locked into place.
Large particles could get in the
circulation system and cause a
blockage.
Cleaning and Care
54
 

Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
Turn off the dishwasher before
cleaning.
Removing the spray arms
Remove the cutlery tray (if present).
Push theupperspray arm up to
engage the inner ratchet and
unscrew the spray arm.

Lift up themiddlespray arm,,to
engage the ratchet and unscrew the
spray arm,.

Remove the lower basket.Pull thelowerspray arm firmly
upwards to remove.

Use a...

Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
Turn off the dishwasher and pull the
plug.
Remove the triple filter (see Triple
filter system).
Use a cup or bowl to scoop water out
of the wash cabinet.

Tilt the locking clamp to the side.

Pull out the non-return valveand
rinse it under running water.

Remove all foreign objects from the
non-return valve.The drain pump is beneath...

Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
To comply with IEC sound testing protocols, please contact Miele for additional
instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
 

Disposal of the packing
material
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that the appliance...

Installation, repairs and other
work by unqualified persons could
be dangerous.
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician
or a qualified technician....

Hardwired electrical connection
It is possible to hardwire this appliance
to an existing power cable.
CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
tripping the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer cannot be held
responsible....