Miele G 5100 Operating Instructions

Optional dishwasher accessories are available from your Miele dealer, Miele or
Mieleusa.com (depending on your model some may already be supplied with your
machine as standard).
If you would like to... the following accessory will need
to be ordered...
...wash a Miele Cappuccinatore ... a Cappuccinatore insert for the
upper basket.
...wash additional items of cutlery ... a cutlery basket for the lower
basket.
...wash long-stemmed glassware ... a glassware rack for the lower
basket.
MieleCare Collection...

Detergent
Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Keep children away from detergent.
Keep detergent out of the reach of
children. Keep children away from
the dishwasher when the door is
open. There could still be detergent
residues in the dishwasher. Only
add detergent just before starting
the program and lock the door with
the child safety lock (depending on
model).
Only use detergents formulated
for domestic dishwashers.
Use...

Adding detergent
Press the latch on the detergent
dispenser. The flap will spring open.
The flap is always open at the end of a
program.Add detergent to the compartments
and close the container flap.
Use one tab or add powder or gel
detergent to compartment II and
close the flap.
If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
Compartment I holds a maximum of
2 teaspoons (10 ml),
compartment II holds a maximum of
3.5 tablespoons...

Turning on
Make sure the spray arms can rotate
freely.
Close the door.
Open the water supply, if it is closed.
Press thebutton to turn the
dishwasher on.
The Start/Stop indicator light flashes
and the indicator of the last set
program lights up.
Selecting a program
Choose your program according to the
type of load and soiling.
See theProgram Guidefor more
information.
Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
You can now...

Program
guideWhen to use Program sequence
Pre-rinse Main
washInterim rinse Final
rinseDrying
12 12
Pots & Pans Fornormally soiled
pots & panswith
dried on food, and
heavily soiled
dishware, use 120%
detergent
recommended.XX XX
Normal Program for
completely washing a
full load ofnormally
soileddishware with
the ability to adjust
energy and water
consumption based on
the soil load of the
dishware.as required X X X X
China & Crystal For temperature
sensitive glassware
and lightly soiled
dishware,use 50%...

Standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher switch into Standby
mode to save energy. The indicators
and time display (where appropriate)
can be turned off and only the
Start/Stop indicator light flashes slowly.
To turn the dishwasher back on press
.
If you do not turn the dishwasher off
after the program ends, it will turn
completely off after a few minutes in
standby mode (see Settings - Optimize
standby).
If refill salt and/or rinse aid or a fault...

Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending
on model) from dropping onto dishes
in the lower basket.
Interrupting a program
A program is interrupted as soon as the
door is opened.
If...

Turbo
The Turbo function can be used to
reduce the program run-times, in
programs in which the option is
available.
In order to achieve optimum cleaning
results, consumption rates are
increased when Turbo has been
selected.
Press thebutton to turn the
dishwasher on.
The Start/Stop indicator light flashes.
Select a program.
Press the Turbo button.
The Turbo indicator light comes on.
You can now start the program.
Once selected, the function will remain
active for all programs until the setting
is...

Press thebutton to turn the
dishwasher on.
The Start/Stop indicator light flashes.
Select the desired program with the
Program button.
Press the Delay start button.
The last delay start time will show in the
time display.
Set the desired delay start time with
the Delay start button.
If you press and hold the Delay start
button, the time will automatically count
up to24^. To start again at 0.5 minutes,
press the Delay start button twice.
Press the Start/Stop button.
The Start/Stop indicator light...

Optimize Standby
A few minutes after a button has been
pressed or the end of a program, the
dishwasher changes to Standby mode
to save energy. The indicator lights and
time display will go out, and only the
Start/Stop indicator will flash slowly.
The dishwasher will not switch to
Standby mode while a program is
running.
If the dishwasher is not turned off at the
end of the program and the door is not
opened, it will turn off completely after a
few minutes in Standby mode.
The Optimize standby function...