Miele G 2872 Operating Instructions

							The Settings menu allows you to adjust standard settings
Opening the Settingsmenu
	Turn the dishwasher on by pressing thebutton.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See Settings- Memory. Switch to the main
menu by pressing Clear.
Settings
Main menu
Sensor Wash
	Select Settings.
The display changes into the menu Settings.
Language
Settings
Time of day
	Select the menu option you would like to change.
Press thebutton to see more information about the
option currently selected.
The selected options in the submenus are marked with a
check.
Settings
41
 
						

							Language
The display contents can be shown in
different languages.
The displayed language can be
changed by the submenu Language.
	Select the desired language and
confirm with OK.
The flag behind the word
Languageserves as a guide when
an unfamiliar language is selected.
Select the respective menu with a
flag until the submenu Language
appears.
Time of day
This selection allows the clock to be
shown as 24 or 12 hours. The clock can
also be set from here.
Setting the clock format
	Select Format.
	Select the desired clock format and
confirm with OK.
Set the time of day
	Select Set manually.
	Set the hour with +/- and confirm with
OK. Set the minutes and confirm.
After confirming the minutes with OK,
the display will revert to the previous
menu.
	Touch Clear to get back into the
Settingsmenu.
Settings
42
 
						

							Detergent
To achieve best results the used
detergent can be set on your
dishwasher. The selections available
are Powder, Gel and Tab. The
program cycle sequence will be
adjusted for the selected detergent.
Depending on the program the
program running time could increase.
Powder
When using powder detergent, salt and
rinse aid must be added for best
results. See Filling the salt container
and Rinse aid for more info. The rinse
aid refill message is activated.
Gel
When using gel detergent, salt and
rinse aid should be added for best
results. See Filling the salt container
and Rinse aid for more info. The rinse
aid refill message is activated.Tab
If the Tab indicator is lit than the
program sequence is adapted to suit
detergents than contain rinse aid and
salt (as well as other components
where applicable).
The rinse aid dispenser and indicator
light are deactivated.
Follow the instructions of the detergent
manufacturer.
The cleaning and drying
performance of these detergent
products vary.
The detergent selection is set by
default to Powder detergent.
	Select the desired detergent and
confirm with OK.
Settings
43
 
						

							Drying Plus
The Drying plus function automatically
opens the door slightly at the end of a
program, in order to improve the drying
process.
This function can also be deactivated.
	Select the desired setting and
confirm with OK.
Water hardness
The water hardness level set can be
viewed under the submenu Water
hardness.
	Press OK to return to
the Settings menu.
To reset the water hardness see
External water softener.
External water softener
Set the dishwasher to the hardness of
your local water supply (see Before
using for the first time).
If the dishwasher is connected to an
external water softening unit which is
regenerated with salt, set the
dishwasher to the water hardness of the
external water softener.
	
Select the water hardness setting
using
, confirm with OK.
°d gr/gal Setting in display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-45
46-60
61-701
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38-46
47-62
63-731
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
45
60
70
Settings
44
 
						

							Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0 and
6 ml.
The dosage set by default to 3 ml of
rinse aid per program.
–Use a higher setting if spots appear
on dry glassware.
–Use a lower setting if streaking
appears on dishes or glasses.
	Use the +/- buttons to selected the
desired rinse aid amount and confirm
with OK.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
The filter check message is set by
default to 40 cycles.
	Select the desired number of cycles
and confirm with OK.
See Cleaning and Care - Triple filter
system for more information.
Adjust Sensor Wash
The Sensor Wash program can be
adjusted to clean stubborn but normal
soiling.
	Select Yes and confirm with OK .
Settings
45
 
						

							Reorganize program list
The order of the programs in the program list can be
reorganized. The two most frequently used programs can be
saved to the first two positions.
Sensor Wash

CancelSelect program for position 1 Continue
	Select with
the program which you would like to save to
the first position of the main menu. Confirm the selection
with the button next to the program.
	Confirm with Continue.
	Repeat with the second program.
The selected programs are shown summarized.
To change a program position, select Back until you reach
the respective program position.
	When finished reorganizing the program list, confirm with
Finished.
Settings
46
 
						

							Save options
Additional options can be selected for
some programs, e.g. extended drying.
See Use - Selecting options.
Save options allows you to save the
selected options for future use of the
program.
This function is turned off by default.
	Select the desired setting and
confirm with OK.
Temperature
The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.
The temperatures are shown in
°C/Celsius by default.
	Select the desired temperature unit
and confirm with OK.
Settings
47
 
						

							Buzzer
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
The buzzer at the end of a program is
turned on by default.
Buzzer at the end of a program
The buzzer at the end of a program
sounds five times in intervals with a brief
break in between. The buzzer sounds up
to one hour if the dishwasher in not
turned off.
Buzzer in case of a fault
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be set
to off.Buzzer volume
Two buzzer volumes can be selected or
the buzzer can be turned off.
Off
The buzzer tone at the end of a
program is turned off.
Soft
The tone sounds in a soft volume.
Loud
The tone sounds in a loud volume.
	Select the desired volume or
deactivate the buzzer.
	Confirm with OK.
Settings
48
 
						

							Button tone
A tone will sound when a button is
pressed.
The volume can be set to seventeen
different levels. It is set to level 8 by
default.
	Select the desired setting and
confirm with OK.
Brightness
The display brightness can be adjusted
in 17 levels.
The brightness is set to level 9 by
default.
	Select the desired brightness and
confirm with OK.
Memory
The memory function allows you to save
the last selected program.
When turning the dishwasher off and on
again after a program has finished or
opening and closing the door, the last
selected program is displayed instead
of the main menu.
The function is turned on by default.
	
Select the desired option and confirm
with OK.
RemoteVision
(Optional accessory.
To learn more about RemoteVision
visit www.miele.com.)
	Select
to show module state.
If module connected and ready is
displayed, no further action is required.
Via the Options menu you can:
–Reboot the module
–Reset the factory default settings
–Enter Ad-Hoc mode
Refer to the RemoteVision section
of this manual or the RemoteVision
Installation manual for further
instructions.
Settings
49
 
						

							Dealer
Demo modes are only for
showrooms.
The dishwasher has three demo
programs for showrooms.
The programs Demo mode and
Endless demo mode show the use
and function range of the dishwasher.
–Demo mode:
The program is started by pressing
any button. It runs once and must be
started again.
– Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
– Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
– Trade show mode:
Once the machine is used for the
first time this option is disabled in the
display.
–
Demo Drying Plus:
The door opens automatically.Turning the demo mode on
	Select the desired option, confirm
with OK.
	Confirm the following messages with
OK.
	Press any button to start the selected
demo mode.
	To cancel the demo mode press any
button again and confirm with OK.
Turning the demo mode off
	Select Off to deactivate the demo
mode and confirm with OK.
	Confirm the message Deactivate
demo mode? with OK.
Factory default
All settings can be reset to factory
default.
	Confirm the message Reset to factory
default? with OK.
	
Confirm the information All settings
are reset to factory default with OK.
Leaving the Settingsmenu
To leave the Settings touch the
Clear control. The main menu shows.
Settings
50