Miele G 2830 Sci Operating Instructions

							The "SettingsJ" menu allows you to adjust standard settings
Open the SettingsJmenu
^Turn the dishwasher on by touching thescontrol.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See SettingsJ- Memory. In this case, switch
to the main menu by touching+C (Clear).
Main menu12:00
°Glass cold
m
°Plate warming
°SettingsF
^SelectSettingsJ.
The display changes into the menu SettingsJ.
Settings12:00
°LanguageF
m
°Time of day
°Detergent
^
Select the desired setting.
The selected options in the submenus are marked with a
checkL.
SettingsJ
41
 
						

							LanguageJ
The display contents can be shown in
different languages.
The displayed language can be
changed by the submenu
LanguageJ.
^Select the desired language and
confirm with
OK.
The flag behind the word
LanguageJ serves as a guide
when an unfamiliar language is
selected.
Select the respective menu with a
flag until the submenu
LanguageJ
appears.
Time of day
The selection allows the clock to be
shown as 24 or 12 hours and to set the
clock.
Setting the clock format
^Select
Format.
^Select the desired clock format and
confirm with
OK.
Set the time of day
^Select
Set manually.
^Set the hour with
+/-and confirm
with
OK. Set the minutes and confirm.
The display changes back into the
Time of day menu.
^Touch+C to get back into the
SettingsJ menu.
SettingsJ
42
 
						

							Detergent
To achieve the best results the used
detergent can be set on your
dishwasher. The selection allows
Powder, Gel, 2 in 1 and 3 in 1
tabs. The program cycle sequence will
be adjusted for the selected detergent.
Depending on the program the
program running time may increase.
Powder
When using powder detergent, salt and
rinse aid must be added for best
results. See Filling the salt container
and Rinse aid. The rinse aid refill
message is activated.
Gel
When using gel detergent, salt and
rinse aid should be added for best
results. See Filling the salt container
and Rinse aid. The rinse aid refill
message is activated.
2 in 1 tabs
The function 2 in 1 adjusts the
program cycle to the use of 2 in 1
detergent products (detergent with
rinse aid). The rinse aid dosage and the
rinse aid refill message are deactivated.3 in 1 tabs
The function 3 in 1 adjusts the
program cycle to the use of 3 in 1
detergent products (detergent with
rinse aid and water softener salt). The
rinse aid dosage and rinse aid refill
messages are deactivated. The salt
usage for the water softener will be
reduced to
1/3and1/4.
Do not use this extra feature
–when using 2 in 1 detergents
(detergent with rinse aid).
–if your tab water has a water
hardness of over 21°dH (21 gr/gal
[US]). See also the information from
the detergent manufacturer.
The cleaning and drying
performance of these detergent
products vary.
The detergent selection is set by
default to powder detergent.
^
Select the detergent used and
confirm with
OK.
SettingsJ
43
 
						

							Water hardness
The dishwasher is equipped with a
sensor softener, which automatically
detects the hardness of your tap water.
After plumbing the dishwasher and
finishing a program, e.g. Rinse &
Hold, the water hardness is displayed
in the menu Water hardness.
^Touch
OKto go back to SettingsJ.
External water softener
If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, the water
hadness must still be set in the
dishwasher to the water hardness from
your water softener unit.
If you dont know the value, set the
dishwasher water hardness to 8°d
(8 gr/gal [US]).
^Set the dishwasher to the water
hardness of the external water
softener and confirm with
OK.
If the dishwasher is not longer
connected to an external water
softener, set the setting to
Auto.
Rinse aid
For best results, the rinse aid dosage
can be adjusted.
The dosage can be set in steps from 0
to 6 ml.
The dosage set by default to 3 ml of
rinse aid per program.
^Use a higher setting if spots appear
on dry glassware.
^Use a lower setting if streaking
appears on dishes or glasses.
^Select the desired rinse aid dosage
with the
+/-controls and confirm with
OK.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and
60 cycles.
The filter check message is set by
default to 40 cycles.
^
Select the desired interval and
confirm with
OK.
Adjust Sensor Wash
The Sensor Wash program can be
adjusted to clean stubborn but normal
soiling.
^
Select
Yesto activate this function
and confirm with
OK.
SettingsJ
44
 
						

							Reorganize program list
The order of the programs in the program list can be
reorganized. Frequently used programs can be saved to the
first three positions.
Select program for position 112:00
°NormalB
m°Pots + Pans
°CancelContinue°
^Select the program to be saved to the first program list
position.
^Confirm with
Continue.
^Repeat for the program to be saved to the second and third
program list position.
The selected programs are now shown.
To change a program position, select
Backuntil you reach the
respective program position.
Summary12:00
Pasta
mPlastics
°BackFinished°
^
When finished reorganizing the program list, confirm with
Finished.
SettingsJ
45
 
						

							Save options
Additional options can be selected for
some programs, e.g. extended drying.
See Use - Selecting options.
Save optionsallows you to save the
selected options for future use with this
program.
The function is turned off by default.
^Select the desired setting and
confirm with
OK.
SettingsJ
46
 
						

							Child Safety Lock
The Child Safety Lock protects the dishwasher from misuse.
If the dishwasher is turned on while the Child Safety Lock is
activated, the display shows
The appliance is locked.
The lock must be deactivated before the dishwasher can be
used.
As long as the Child Safety Lock is activated, the dishwasher
is locked every time it is turned on.
The function is turned off by default.
^Select
Onto activate this function and confirm withOK.
Canceling the Child Safety Lock
Unlocking the dishwasher
^Turn the dishwasher on by touching thescontrol.
The message
The appliance is lockedshows.
^Confirm with
OK.
Deactivate Child Safety Lock?
°YesNo°
^
Select the optionYes.
Child Safety Lock
WThe appliance is unlocked
The dishwasher is unlocked and ready to use.
SettingsJ
47
 
						

							Program lock
The running program can be locked. This function prevents
accidentally changing a program during use.
You can select if the program lock should be activated or not.
The actual locking of the program is done when a program is
started.
The function is turned off by default.
Program lock12:00
°Yes
°NoB
OK°
^SelectYesto activate this function and confirm withOK.
^Touch+C to go back to the main menu.
SettingsJ
48
 
						

							Locking a program
To lock a program, a program must be started first.
^Select a program and begin it with
Start.
Sensor Wash12:00
Main wash
Time left 1:23 h
°WCancel°
^Select).
^Select
Onto activate this function and confirm withOK.
The program is locked. It stays locked until the lock is
deactivated.
To cancel a running program, the program lock must be
deactivated first.
Once the program is finished, deactivate the lock or turn the
dishwasher off and on again before starting a new program
or selecting settings.
Deactivating the program lock
Sensor Wash12:00
Main wash
Time left 1:04 h
°X
^
Select$and confirm withOK.
^
Select
Offto deactivate this function and confirm withOK.
The program is unlocked. Any selections can be made.
SettingsJ
49
 
						

							Temperature
The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.
The temperatures are shown in
°C/Celsius by default.
^Select the desired temperature unit
and confirm with
OK.
Buzzer
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
The buzzer at the end of a program is
turned off by default.
Buzzer at the end of a program
The buzzer at the end of a program
sounds five times in intervals with a
brief break. The buzzer sounds up to
one hour if the dishwasher in not turned
off.
Buzzer in case of a fault
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be
turned off.Buzzer volume
Two buzzer volumes can be selected or
the buzzer can be deselected.
Off
The buzzer tone at the end of a
program is turned off.
Soft
The tone sounds in a soft volume.
Loud
The tone sounds in a loud volume.
^Select the desired volume or
deactivate the buzzer.
^Confirm with
OK.
SettingsJ
50