Miele G 1872 Operating Instructions

Installation
The dishwasher must be installed
and connected in compliance with
the installation instructions.
The dishwasher must be correctly
aligned to ensure problem-free
operation.
In order to ensure stability,
built-under and integrated
dishwashers must only be installed
under a continuous worktop which is
secured to adjacent cabinetry.
If you want to convert your
freestanding dishwasher to a
built-under (U) model, you will need to
order the appropriate conversion kit. If
you remove the existing...

Inadvertently filling the salt
reservoir with powder or liquid
dishwasher detergent always leads to
serious damage to the water softener.
Make sure you have picked up the
correct packet of dishwasher salt
before filling the salt reservoir!
Please only use special coarse
grained dishwasher salt for
reactivation, as other salts may contain
insoluble additives which can impair
the functioning of the softener.
In an appliance with a cutlery
basket (depending on model)
cutlery is cleaned and dried more...

Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that any plastic wrappings, bag
etc. are disposed of safely and kept out
of the reach of babies and young
children. Danger of suffocation.
Rather than just throwing these
materials away, please ensure that they
are recycled.
Disposal of your old appliance
Electrical and electronic appliances
often contain materials...

To open the door
^Pull the handle.
If the door is opened during operation
all functions are automatically
interrupted.
At the end of the programme, the door
will open automatically a little in order to
help the drying process.
,Keep the area around the door
free of obstructions.
This function can be deactivated (see
Settings menu, Drying plus).
To close the door
^Push the baskets right in.
^Then raise the door upwards until the
catch engages.
The door will then close automatically.
,Do not put your hand...

Welcome screen
^Switch the dishwasher on with the On buttong.
If the dishwasher is being switched on for the first time, the
welcome screen will appear.
Setting the language
The display will then change automatically to the screen for
setting the language.
}#eština
LanguageFe
}dansk
^Select the language you want and confirm this withOK.
A tickLwill appear next to the language that has been set.
Clock display
The display will then change to the screen for setting the
clock display.
}12 h Clock
Clock...

Setting the time of day
The display will then change to the screen for setting the
time.
}+12
:00
}-Please set the time OK}
^Set the hours with+/-and confrim withOK.
Then set and confirm the minutes.
These settings will be saved in memory after the dishwasher
has been through one complete programme.
After you have confirmed the minute entry with
OK, two
messages will appear in the display. The
Insufficient salt
andRinse aid lowmessages may also appear to remind you
to fill the salt and rinse aid...

Before using the appliance for
the first time you require:
–Approx. 1 kg dishwasher salt*,
–Domestic dishwasher detergent*,
–Rinse aid* formulated for domestic
dishwashers.
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
This dishwasher is fitted with a water
softener sensor which automatically
sets the water softener unit for the
local water hardness level.
* In the UK, Miele branded...

Filling the salt reservoir
In order to achieve good cleaning
results, the dishwasher needs to
operate with soft water. Hard water
results in the build-up of calcium
deposits on crockery and in the
dishwasher.
Mains water with a hardness level
higher than 0.7 mmol/l (4 °d – German
scale) needs to be softened. This takes
place automatically in the integrated
softener unit.
The softener unit is suitable for a water
hardness level of up to 12.6 mmol/l
(70 °d). It requires dishwasher salt.
If you use...

^When filling the salt reservoironly
open the door halfwayto ensure
that all the salt gets into the reservoir.
^Press the button on the lid of the salt
reservoir in the direction of the arrow
until the flap springs open.
^
Lift up the funnel.
Do not fill the salt reservoir with
water.
^Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt, depending on the brand
used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is...

Insufficient salt indicator
^Fill the salt reservoir with dishwasher
salt for reactivation when the
Insufficient saltmessage appears.
(If it appears during a programme,
wait until the end of the programme).
^Confirm with
OK.
The Insufficient salt message will go
out.
After the salt reservoir has been filled,
the Insufficient salt message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, confirm again with
OK.
,After refilling the salt...