Miele G 1262 Scvi Operating Instructions

Problem Possible fault Solution
Glasses are
discolored and
the film cannot
be wiped off.Detergent deposits. Use a different detergent.
Clouding or
etching on
glasses.Possible causes may be :
excessive rinse aid, incorrect
water hardness level set, type
and amount of detergent.
Any one or a combination of
these faults may be to blame.See the relevant section of
this manual to:
–adjust the rinse aid
dosage,
–adjust the water
hardness level,
–change the type and/or
adjust the amount of
detergent used,
–...

10 place settings, Standard program:Normal
Upper basket Lower basket
Cutlery tray
Comparison tests
42
 

Repairs
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
Please quote the model type and
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles...

To transport the dishwasher, e.g. when
moving to a new home, note the
following:
–Empty the dishwasher.
–Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
–Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
Transport
44
 

User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
 

Check and clean your dishwasher
regularly. This will help avoid faults
and problems.
Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonium cleaners should not be
used on the dishwasher.
Theywilldamage the surface.
Wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer, Miele or online at
www.miele.com.
Door and the door seal
Wipe the...

Indicator reflector
The reflector of the optical interface is
located in the steam deflector beneath
the counter top.
Clean as necessary with a damp
cloth.
Control panel
Clean the control panel as necessary
with adamp cloth.
The appliance front and controls
are not scratch proof.
Remove spills immediately.
Cleaning and Care
47
 

Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones). During normal use, the
filter system is self-cleaning.
The machine must not be used
without all the filters in place!
Check and clean the filter system
periodically for any trapped or
foreign objects.
The level of soiling and time it takes
before the filters need cleaning will...

To clean the inside of the filter, the flap
must be opened.
Push the clips togetherand open
the flap.
Rinse under running water.
Close the flap so that the clip
engages.Return the filter so it lies flat in the
base of the wash cabinet.
Lock the filter by turning the handle
clockwise.
The triple filter system must be
inserted and locked into place.
Large particles could get in the
circulation system and cause a
blockage.
Cleaning and Care
49
 

Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
Turn off the dishwasher before
cleaning.
Removing the spray arms
Remove the cutlery tray (if present).
Push theupperspray arm up to
engage the inner ratchet and
unscrew the spray arm.

Lift up themiddlespray arm,,to
engage the ratchet and unscrew the
spray arm,.

Remove the lower basket.Pull thelowerspray arm firmly
upwards to remove.

Use a...