Miele Fn 14827 Operating And Installation Instructions

~The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
~Do not place electric heaters or
candles in the appliance to defrost it.
These can damage the plastic...

Normal energy
consumptionIncreased energy
consumption
Installation siteIn a ventilated room. In an enclosed, unventilated room.
Protected from direct sunlight. In direct sunlight.
Not near to a heat source (radiator,
oven).Near to a heat source (radiator,
oven).
Where the ideal ambient room
temperature is approx. 20°C.Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).With a...

Before using for the first time
Protective foil
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
^Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning and care
^Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioner supplied as soon as you
have removed the foil.
^On stainless steel appliances also
treat the side panels with the Miele
stainless steel...

Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^Touch the On/Off sensor until all of
the indicators go out.
The lighting will not come on when you
open the door and the cooling process
will be switched off. (If this does not
happen, the safety lock is still
activated).
Settings mode
Certain settings on the appliance can
only be selected in the...

Switching the sensor tones on/off
The sensor tone which sounds each
time a sensor is touched can be
deactivated.
^Touch and leave your finger on the
sensor.
^At the same time, briefly touch the
On/Off sensor (without letting go of
thesensor).
^Leave your finger on thesensor for
another 5 seconds untilcappears in
the display.
^Touch thesensor repeatedly untilb
appears in the display.
^Touch the On/Off sensor again.
^
By touching thesensor, you can
now select whether the sensor tones
are switched on...

You have now left the settings mode.
The safety lock indicator
Xwill light up
in the temperature display when the
safety lock has been activated.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^switch the appliance off,
^disconnect it from the mains. Switch
off at the wall and withdraw the plug
from the socket, or disconnect the
mains fuse.
^clean the appliance out and
^leave the door ajar to air the
appliance.
If,...

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18 °Cis required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
temperature rises...

If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very fullandfor
approx. 24 hours if the appliance is
fullbefore checking the temperature
display as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still too
high or too low, you will need to adjust it
again.
Temperature range
The temperature can be adjusted from:
-14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the...

Your appliance has been fitted with a
warning system which ensures that the
temperature in the appliance cannot
rise unnoticed and to avoid energy
being wasted if the door is left open.
Activating the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
Temperature alarm
An alarm will sound if the temperature
becomes too warm.
The alarm off sensor will flash red and
the Freezing symbol will flash.
The alarm will sound, the alarm off
sensor will flash red and the...

Door alarm
The alarm will sound if the door is left
open for more than approx. 2 minutes.
The alarm off sensor will light up red
and the Freezing symbol will flash.
The alarm will stop and the indicators
will go out as soon as the door is
closed.
Switching the door alarm off
early
If the noise of the door alarm disturbs
you, you can switch it off early if you
wish.
^Touch the alarm off sensor.
The alarm will stop.
The Alarm off sensor will light up
constantly and the Freezing symbol
will continue to...