Miele Da 420 V Manual

All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations
(BS 7671 in the UK).
Installation, repairs and other work
by unqualified persons could be
dangerous, for which the
manufacturer cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do...

The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Connection to a window contact
switch
If adequate ventilation to the room can
only be ensured by having a window
open when the cooker hood is in use at
the same time as a heating appliance
which depends on the air from the
same room, then the control module
can be used to connect a window
contact switch (not supplied) to the
appliance.
Once connnected, the cooker hood can
only be...

Connection to a light switch
The control module can be used to
switch on the cooker hood lighting and
also to dim it (depending on model) via
a light switch in the house.
Installation
The control module is fitted in the tower
after the cover plate has been
unscrewed from the ceiling.
The control module is supplied with its
own detailed operating and installation
instructions.
Operation with DSM 400 control module
33 

In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
–Your Miele Dealer / Chartered Agent
or
–The Miele Customer Contact Centre
(see back cover for address).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. These are
shown on the data plate which is visible
when the grease filter is removed.
For G.B.: Please note that telephone
calls may be monitored and
recorded for training purposes.
After...

Total connected load*.........280W
– Fan motor*................200W
– Hob lighting.............4x20W
Voltage..................AC230V
Frequency..................50Hz
Fuse rating (UK)...............13A
Weight
DA 420-4....................32kg
DA 424-4....................36kg
DA 420-4 EXT................29kg
DA 424-4 EXT................33kg
DA 420-4 U..................34kgFan performance* according to
EN 61591
Extraction power on the DA 420-4 and
D 424-4 with150 mm ducting:
Level I...................200m...

Alteration rights reserved / 4309M.-Nr. 07 261 180 / 02