Midway Touch Master 8000 Upright Conversion Manual

 
APRIL 2000 
16-80021-101 
 
Manual Includes 
• Installation  Operations  Adjustments  Parts Information  Wiring  Troubleshooting  
 
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of any federal, 
state or local law or regulation of the United States or any foreign country governing gaming devices. All operators of this game are 
responsible for its operation in accordance with such laws and regulations. The manufacturer’s factory...

  
 
How to adjust the volume of your Touchmaster
®
: 
CALIBRATE    SETUP
SETUP BUTTON CASH DOOR 
  Illustration A. Setup Button Location  Illustration B. SYSTEM SETUP screen 
1. 
Unlock and open cash door and hit SETUP button. (See Illust. A.) 
2. 
Touch + or – to adjust volume level. W hen done, touch EXIT . (See Illust. B.) 
3.
 Close and lock cash door. (See Illust. A.) 
How to customize your Touchmaster
®
 name: 
1. 
Unlock and open cash door and hit SETUP button. (See Illust. A.) 
2. 
Touch...

TOUCHMASTER
®
 
CONVERSION 
CHAPTER 
 
SETUP 
 
NOTICE:  Information in this manual is subject to change without notice. Midway 
Amusement Games, LLC reserves the right to improve equipment function, design, or 
components as progress in engineering or manufacturing methods may warrant. Field 
installed upgrade kits may also change the operating sequence or functions.
 
123
54 

Setup - 2  Midway Amusement Games, LLC 
SAFETY INSTRUCTIONS 
The following instructions apply to operators and service personnel. Read these instructions before 
preparing your Video Game Machine for play. Other safety instructions appear throughout this manual. 
DEFINITIONS OF SAFETY TERMS 
DANGER
 indicates an imminent hazard. Failing to avoid this hazard W ILL cause death or serious injury. 
WARNING
 indicates a potential hazard. Failing to avoid this hazard COULD cause death or serious injury....

Touchmaster® Conversion Kit    Setup - 3 
PRODUCT SPECIFICATIONS 
Video Game Machine Characteristics 
Player Variables
 
Choice of many games 
1 or 2 players per game 
High score recognition, Difficulty Operator Variables 
Coinage, Difficulty, 
Graphics, Statistics 
Audits, Time, Volume Diagnostics 
Automatic Power-Up Self-Test 
Manual multi-level menu system 
Touchscreen calibration 
 
INSPECTION 
Unpack the materials from the carton and inspect for obvious signs of damage. Use the checklist to be 
sure...

Setup - 4  Midway Amusement Games, LLC 
TOUCHMASTER® CONVERSION KIT PACKAGING AND CONTENTS  

Touchmaster® Conversion Kit    Setup - 5 
INSTALLATION PROCEDURE 
VERIFY ORIGINAL EQUIPMENT OPERATION 
1. INSPECT PARTS:  
Unpack the conversion kit and verify that nothing was damaged in shipping. 
2. CHECK CABINET:  
Inspect cabinet for damage. Repair before proceeding. 
3. VERIFY OPERATION:  
Plug line cord into grounded outlet and switch on AC power. You should hear 
a single beep during startup. A working machine starts without system errors and enter Attract Mode. 
4.  Turn AC power off and unplug...

Setup - 6  Midway Amusement Games, LLC 
16. TRACKING TEST:  
Press SETUP button. Touch TEST SCREEN . 
TRACKING TEST SCREEN 
17.  A cross appears in test screen center. Touch center of the cross and observe that crosshair centers 
on cross. The crosshair follows your finger as you move it across the screen. 
18.  Touch EXIT  on the screen. 
 
If crosshair fails to center on your finger, note distance and direction of discrepancy. Return to 
calibration screen and place your finger on screen slightly away...

Touchmaster® Conversion Kit    Setup - 7 
REMOVE ORIGINAL EQUIPMENT ELECTRONICS 
 
BOTTOM DOOR REMOVED 
1.  Unplug line cord. Insert key into Bottom Door Lock and turn clockwise to unlock. Remove Door. 
2. 
GROUND WIRE:  Remove ground wire, if present. 
3. 
TOUCHSCREEN:  If Touchscreen Connector Cable (a rectangular connector shown below) is 
connected to the CPU Board Assembly at J5, disconnect it from the CPU Board Assembly.  
If a separate Touchscreen Controller Connector Cable is also present,...

Setup - 8  Midway Amusement Games, LLC 
TOUCHSCREEN 
CONNECTOR 
CABLE
CONNECTS TO 
TOUCHSCREENTOUCHSCREEN 
CONTROLLERTOUCHSCREEN 
CONTROLLER
CONNECTOR
CABLE
 
TOUCHSCREEN COMPONENTS 
4. CONTROLLER:  
If present, remove Touchscreen Controller from cabinet. Detach Touchscreen 
Connector Cable from Controller. Leave cable inside cabinet and retain mounting hardware. 
POLARIZING
KEY
CONNECTOR
CABLE
 
REMOVAL OF POLARIZING KEY (IF PRESENT)  
FROM TOUCHSCREEN CABLE CONNECTOR 
5. KEY REMOVAL:  
Inspect...