Midway Sportstation 25in Standard 4 Player Operation Manual

2-3 Players may choose to create their own offensive plays rather than depend on the standard plays in the
game. Players can design and name their plays using the CREATE PLAY feature, then store these plays
for future use. These custom plays become available on an additional page of game plays.
NFL BLITZ 2000 GOLD EDITION
 PLAYER CONTROLS
The player controls are used to maneuver the team members and attack or defend against adversaries.
• START (orange).
 This button allows players to begin or continue...

2-4 CONTROLLING CHARACTERS
The joystick and action buttons control characters on the basketball court. The joysticks respond to
different amounts of deflection as well as direction. 

2-5 GAME ACTION
Standard NBA basketball rules apply, except that the game only includes four active characters. Game
settings determine game length and speed. The player view of the action changes automatically
whenever a better camera angle becomes available. Game sounds include announcer comments and
crowd noises.
SCORING
The game awards points for baskets, just as in real basketball games.
NBA SHOWTIME
 PLAYER CONTROLS
• JOYSTICK. 
Each player’s joystick controls the position of that player’s...

2-6
PLAYER CONTROLS 

2-7
DIAGNOSTIC CONTROL SWITCH LOCATIONS
PLAYER CONTROL LOCATIONS 

2-8
MAINTENANCE
♦
 Cabinet
Use only non-abrasive cleaners to avoid damaging game graphics. Apply cleaner to a clean cloth or
sponge. Wipe the screen clean with this cloth or sponge. Do not apply cleaner directly on the cabinet!
♦
 Control Panel
Dirt or debris on the joysticks or buttons can affect earnings. Apply the cleaner to a clean cloth. Use
the cloth to wipe the controls. Don’t apply the cleaner directly to the controls!
♦
 Viewing Glass
To clean the glass, you don’t need to switch off power to the...

2-9 Disconnect the meter wiring harness at the connectors. Remove front screws and slide the meter out.
Assure that a protective diode connects across the replacement meter’s terminals. The diode
prevents driver circuit damage. 

2-10
REINSTALLING CIRCUIT BOARD ASSEMBLIES 

2-11
♦
 Hard Disk Drive
Switch off power to the game. Unlock and remove the rear cabinet door. Remove the perforated
metal cover over the game electronics. Disconnect the DC power cable from the hard disk drive.
Unplug the ribbon cable from the hard drive. Don’t disconnect the cables from the CPU Board.
Loosen the drive mounting screws and lift the drive out of its mounting bracket. Remove the screws.
Save them for reuse in future hard drive installations. When returning a hard drive to your...

2-12
♦
 Memory
CAUTION:
Static electricity builds up on your body. This static can damage or
destroy sensitive the game circuits. BEFORE touching or handling electronic
assemblies, discharge static electricity by touching the electronics mounting plate.
NOTICE: 
CPU Board and SI/O Board chips don’t face same direction. When
mounting chips on either board, refer only to chips on the same board for
reference. Never use the chips on another board for reference.
ROM (Read Only Memory) circuits contain...