Metz Talio 32 S Lcd Operating Instructions

51
20.3 Using the EPG
Recording a Programme
Selecting a programme for recording:
If you have a video recorder with the dialogue
system, the EPG permits you to start a recording
by pressing a single key.
• Press the EPG key to open the EPG.
• Use the cursor control key to select the program-
me you wish to record.
If a video recorder with
dialogue system is connected
(see also Section 25):
- Switch on the video recorder.
- Insert a cassette.
- Press the red key  on the remote
control.
If a normal video...

52
21. Setting the
Countr y and Language
The menu items Language and Countr y
are not available in a 2 ** menu.
Selecting the language in the TV menu
You can select any of the available languages for
the TV menu. All texts in the menu and in the help
screen (Information) are then displayed in the
selected language.
Setting the countr y
After installation of the TV set, you must
enter the country in which it is installed
(such as Great Britain) in order to
assign certain basic settings (such as
the...

53
22. Setting Stations
Setting the reception mode
This TV set is capable of operating in three diffe-
rent reception modes:
Analogue TV:
The broadcasting technology which has been used
for many years. The signals can be received via a
rooftop antenna or a cable.
DVB-T:
The new digital broadcasting technology whose
signals can be received via an existing (analogue)
rooftop antenna or an indoor antenna (depending
on the strength of the available signal). For more
details, please consult your local TV...

Various TV standards for picture and sound are
used in different countries. If the wrong TV stan-
dard is selected, you will not be able to hear the
sound, or it will be distorted. The TV standard L
also uses a different standard for transmission of
the picture. The TV standard must therefore be set
before you execute a station search.
The TV set is set in the factory to the TV standard
B/G.
Setting the TV standard 2)
• Press the MENU key to open the
TV menu.
• Press the red key ® to open the
menu...

55
Opening the menu
22.1 Setting Stations
Analogue TV
Terrestrial station search
The terrestrial station search automatically sear-
ches the entire range of available reception fre-
quencies for stations. All stations which are found
are placed in the station table which is displayed
at the end of the search operation. If you are not
satisfied with the order in which the stations are
displayed, you can move them to other positions
or delete unwanted stations 
(see Section 24., Sorting stations.
Executing...

56
The TV set will normally detect the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically.
If this automatic selection does not provide satis-
factory results (which should happen only rarely),
you can select the colour standard manually for
each programme position.
The colour standard is set in the factory to Auto-
matic.
Setting the colour standard
• Press the MENU key to open the TV menu.
• Press the white key  to open the
station table.
• Press the F2key to enable editing of
the...

57
DVB-T station search
The DVB-T station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29. for
details of DVB radio mode. 
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., Sorting stations.
Executing the automatic station search
• Press the MENU key to open the TV...

58
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the MENU key to open the TV menu.
• Press the red key  to open the menu Confi-
guration.
• Use the corresponding numeric key (in the
example: 
) to select  DVB-T.
• In the setting window Antenna, you can switch
the supply voltage for an antenna on or off with
the - +key  (see also page 57).
• Use the corresponding numeric key
(in the example: 
!) to...

59
DVB-C station search
The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29 for
details of DVB radio mode. 
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., Sorting stations.
Executing the automatic search
• Press the MENU key to open the TV
menu.
• Press...

60
For a manual station search, you must know the
channel number or the frequency of the station you
wish to find.
Executing the manual search
• Press the MENU key to open the TV menu.
• Press the red key  to open the menu 
Configuration.
• Use the corresponding numeric key
(in the example: 
%) to select 
DVB-C.
• The cursor is on the menu line
Search settings.
• Press the OK key and, in the setting
window, use the 
-+
key to select
All, FTA only or FTA +CICAM
(see also page 59).
• Press the OK key and...