Metz Milos 37s Operating Instructions

							11
With the TV menu, we provide you with an
assistant to help you find your way through the
many possible settings of the TV set.
Dont be afraid to change any settings in the
various menus. No changes will be
saved unless you press the OK key to
confirm them. If you are not sure whet-
her you want to keep a changed set-
ting, you can exit from the menu at any
time, without saving any changes, by
pressing the EXIT key.
Within the TV menu, you can return to
the previous main menu item at any
time by pressing the MENU key. If
you are not sure what a menu item
does, press the INFO key for more
information.
In order to return to the menu, press
the INFO key twice.
You can open each of the five main sections of the
menu with the key of the corresponding colour.
The card file which is then displayed is subdivi-
ded into Subjects (on the left) and Sections (on the
right), and you can select these by moving the
red, triangular cursor with the oval cursor control
key or with the numeric keys.
When you press the OK key, the current setting
for the selected item is shown in the Setting win-
dow below the card file and can be adjusted
with the 
-+
key.
You can save the new setting by pressing the
OK key, which also returns you to the list of sec-
tions. If you do not want to save the new setting,
press the MENU key to return to the correspon-
ding main menu item or press the EXIT key to
close the menu. 
You can delete any incorrect inputs with the IIkey.
8. Menu ControlOpening the menu
MENU
OK
* The number of subjects and sections depends
on the selected scope of operation. Depen-
ding on the configuration of the TV set, the
various menu items may be displayed in a
different order and numbered differently.
Setting window
Open the menu
with
: back to TV
picture
EXIT
Rotation2)3)
Progressive2)3)
Comb filter2)3)
Zoom/Panorama2)3)
CTI3)
Noise reduction3)
Picture sharpness
Colour intensity
Contrast
BrightnessSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Cursor
F1➔
Related numeric keysSection*
Subject*
OK
EXIT
II
 
						

							12
Teletext is an additional service provided free of
charge by many TV stations. It is an electronic
magazine through which you can browse in
various ways.
Opening Teletext:
• Press the TEXT key. If the selected
station offers TOP-Text, a card
file is displayed (see the picture on
the left).
If TOP-Text is not available, Teletext
page 100 is displayed (see the pictu-
re below).
• In the TOP-Text card file, you can
select the desired cards with the cur-
sor control key or with the numeric
keys.
• Press the OK key to open the selec-
ted card.
Controlling Teletext with pages
displayed:
Blue key – next subject. 
Yellow key – next section. 
White key – next page.
After pressing the coloured pre-selec-
tion key, you can step through the sub-
jects, sections or pages with the cursor
control key or with the numeric keys.
If you wish to select a specific page,
enter its page number on the numeric
keys.
If sub-pages exist for the selected page, the page
numbers are displayed in black. In the example
shown here, there are five sub-pages.
You can step through these sub-pages with the
cursor control key.
9. TeletextOpening the menu
TEXT
Page number
i
Gehörlose
Börse
Service
BR-Intern
Hörfunk
Fernsehen
Sport
Bayern
Schlagzeilen
ÜbersichtImpressum
A-Z
100
100 ProSieben Datum Uhrzeit
100Kartenlegen
Live
Gratis
09.56 talk talk talk. . . . . . . . . . . . . . . . . . . . . . 334
10.56 S.O.S.Style & Home. . . . . . . . . . . . . . . . 335
Aktuelle Meldungen . . . . . . . . . . . . . . . . . . . . . . . 112
Computer Wurm . . . . . . . . . . . . . . . . . . . . . . . . . 113
TED: Brauchen wir Schutz ? . . . . . . . . . . . . . . . . . 123
Weitere Meldungen . . . . . . . . . . . . . . . . . . . . . . . 135458
00010203040506070809
Sub-pages
 
						

							13
Double font size
You can double the size of the font used
for Teletext pages with the F1key. Pres-
sing this key once displays an enlarged
picture of the upper third of the page.
Pressing it a second and third time dis-
plays the centre and lower thirds of the
page. Pressing a fourth time displays the
entire page again.
Riddle key (display hidden text)
Function key F2is programmed in the
factory to display hidden text, such as
the answers to riddles.
Back to the last index page
You can return directly to the last index
page you have displayed by pressing
the numeric key .
Stop page scrolling
The IIkey or the OK key can be used
to stop the automatic scrolling executed
by some pages, and to enable this
again.
Page selection with the cursor
Press the OK key to stop page scrol-
ling. The cursor is now positioned at
the top left corner of the page and you
can use the cursor control key    
to position it anywhere on the displayed
page. This function is useful on index
pages (such as pages 100, 200, etc.) in
order to select a page you want to see.
After positioning the cursor on the des-
ired page number, press the OK key to
display its contents.
Setting marks in Teletext 5)
As a user of Teletext, you will probably
want to visit certain pages (such as
stock-market news, news pages or the
weather forecast) regularly.
In order to find these pages quickly, you
can set marks to suit your personal
requirements.
To do this, open a page for which you
want to set a mark.
• Press the red key for Set to place
a mark on this page. The number of
the mark you have just set is displayed
above the window containing the num-
ber of the Teletext page. In the case of
multiple pages, the mark is always set
and displayed for the currently dis-
played sub-page.
Up to 10 marks can be set for
each programme position.
Scrolling through marked
Teletext pages 
5)
With the Teletext window open, you can
step sequentially through the marked
pages with the green key.
An even easier method is by pressing the
TEXT key while the TV programme is
displayed. Each time you press this key,
the next marked page is displayed. After
the last marked page, the TV picture is
displayed again.

9. Teletext
5) Not possible with an external receiver !
 
						

							14
Displaying all Teletext marks 5)
If you have set marks for a programme position,
you can display an overview of these marks by
pressing the F3key. The displayed list shows whe-
re the marks are set. Press F3again to hide the
list.
You can select the individual marks in the list with
the numeric keys.
Clearing Teletext marks 5)
Open the Teletext page whose mark is to be dele-
ted and press the red key Delete to delete the
mark.
Subtitles in Teletext
Your TV set is capable of displaying subtitles.
When a programme for which subtitles exist
starts, the TV station displays a box showing the
Teletext page on which these can be found.
• Press the TEXT key to open Teletext.
• If this is a TOP-Text station, the card file is dis-
played. Press the OK key and open any avai-
lable page.
• Use the numeric keys to enter the number of the
page containing the subtitles.
9. Teletext
5) Not possible with an external receiver !
 
						

							15
Opening the menu
AV playback  (devices with switching voltage)
Before they can be used, AV devices must
be registered and assigned to the appropri-
ate input sockets in the menu AV devices.
Playing back a recording from a video cassette,
DVD, etc. on a connected AV device is called AV
playback.
In order to see the picture, you must programme
your TV set to execute an automatic
programme change at the EURO socket
to which the AV device is connected.
Programming a programme
change
This menu item is not available in
a 2 ** menu (see Section 30,
Scope of Operation).
The automatic programme chan-
ge is set in the factor y to ON
for all EURO sockets.
• Press the MENU key.
The TV menu appears on the screen.
• Press the red key  . The menu
Configuration is displayed.
• Use the corresponding numeric key 
(in this example: 
) to select the menu item
EURO sockets.
• Use the cursor control key to select EURO 1,
EURO 2 or EURO 3.
• Press the OK key and then, in the setting win-
dow, use the 
-+
key to select Programme chan-
ge on.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.



10. AV Playback
MENU
EURO 3
EURO 2
EURO 1 Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Change stations   on
Programm change
of switching line.
Change with        .
Save with

OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
–   +
 
						

							16
If you now start to play back a recording on the
connected AV device, the TV set changes automa-
tically from any other programme position to the
playback mode.
AV playback
(devices without switching voltage)
Before they can be used, AV devi-
ces must be registered and assig-
ned to the appropriate input sok-
kets in the menu AV devices.
In order to see the played back picture,
you must switch the TV set to playback
mode.
• Select any programme position.
• Press the AV key.
• Use the corresponding numeric key to select the
AV device you want to use.
• The TV set now changes from the current pro-
gramme to the selected playback device.
• Start the replay function on the AV device. This
AV selection remains active until you switch to
any other programme position.
• After watching the film from the AV device,
press the TV key to return to normal TV mode.

10. AV PlaybackOpening the menu
2DVD-Player
1Videorecorder
AV
Select with 
...
or       .
Confirm with      .
OK
 
						

							17
10.1 AV Playback
VCR function
The menu item VCR is not available in a
2 ** menu.
Picture quality when playing back from
tape devices
The VCR function ensures an optimum picture
quality when playing back recordings from tape
devices such as video cassette recorders or cam-
corders.
Setting the VCR function
• Select the appropriate AV level by pressing the
AV key and using the numeric keys to select
the AV device which is to supply the pictures.
• Press the MENU key to open the TV
menu.
• Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the corresponding numeric key (in
the example: 
)to select the menu
item Pict.settings for Pr.
• Use the corresponding numeric key (in
the example: 
)to select the menu
item VCR.
• Use the 
-+
key to select Opt.1. If this setting
does not produce a satisfactory result, you can
try using Opt.2.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.

VCR settings     Opt.1
Change with
Accept value with
OK
Opening the menu
MENU
F1
OK
EXIT


The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +
 
						

							18
11. General Picture Settings
Some of the menu items are not available
in a 2 ** menu.
The picture settings brightness, contrast, colour
intensity, sharpness and noise reduction can be set
generally for all programme positions and saved
as standard valueswhich can be recalled at any
time by pressing the OK key.
Opening the picture settings menu:
This example describes how the brightness is
adjusted. The other picture settings can be adjus-
ted in a similar manner.
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key  . The menu
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the cursor control key to select
the menu item Brightness.
• The various menu items can be selec-
ted with the aid of the numeric keys.
• In the setting window, use the 
-+
key to change
the setting.
• Use the cursor control key to select the third
line Save as standard values.
• If you wish to save the new setting, use the 
-+
key to select Yes.
• Press the OK key to save the changed setting
as a standard value.
• Press the EXIT key to close the TV menu.
If the standard values do not provide a
satisfactor y picture in some programme
positions, you can make settings for these
positions which differ from the standard
values. See the next sections. 11.1 and
11.2.


Opening the menu
MENU
Factory settingsZoom/PanoramaNoise reduction3)
Picture sharpness
Colour intensity
Contrast
BrightnessSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Brightness61Standard value50Use as default value: Yes
Change with
Accept current
value as default
value.
F1➔
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +
 
						

							19
Opening the menu
MENU
11. General Picture Settings
Some of the menu items are not available
in a 2 ** menu.
The picture settings zoom, vertical position, auto-
matic zoom and panorama can be set and saved
as general settings for all programme positions.
Setting the zoom/panorama mode:
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the cursor control key to select
the menu item Brightness.
• Press the corresponding numeric key
to select Zoom/Panorama.
• Use the cursor control key to select the
desired menu items.
• Use the 
-+
key to change the settings
for Zoom/Panorama.
• Press the OK key to save the new settings.
The picture shows the factory settings.
• Press the EXIT key to close the TV menu.
The functions Panorama and Zoom
can be combined with each other.


Factory settingsZoom/PanoramaNoise reduction3)
Picture sharpness
Colour intensity
Contrast
BrightnessSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Zoom value 0 Panorama Yes
Picture pos., vert. 0% Pan. modeNon-linearAutomatic zoom off
Change with 
Accept value with.
F1➔
OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
–   +
 
						

							20
11.1 Picture Settings for
Programmes via TV Menu
Opening the menu
Picture settings for individual programme
positions are not available in a 2 ** menu.
If the standard values do not provide a satisfacto-
ry picture in some programme positions, you can
make different settings for these positions which
override almost all of the general picture settings.
These individual settings apply only to the pro-
gramme position for which they are made, and
they cannot be overwritten with the
standard values. In addition to the
general picture settings, the individual
settings also include the settings colour
offset, colour standard and VCR.
Individual picture settings for
programme position xy:
• Select the programme position whose
picture settings you wish to change.
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu Picture and
sound and the menu item General picture set-
tings are pre-selected.
• Use the cursor control key to select the menu
item Pic. settings for Pr. And press the OK
key.
• Use the corresponding numeric keys (in this
example: 
for noise reduction) to select the
desired menu items.
• In the setting window, use the 
-+
key to change
the setting.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.

MENU
VCR 3)
Colour standard3)7)
Colour offset 3)7)
Noise reduction 3)
Picture sharpness
Colour intensity
ContrastSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Noise reduction   medium
Change with 
Accept value with
.
OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
–   +