Meridian D Ila1080mf2 Digital Video Projector User Manual
Here you can view all the pages of manual Meridian D Ila1080mf2 Digital Video Projector User Manual. The Meridian manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
1Pull out the plug from the power outlet
●Pull out the power plug from the outlet while the [STAND
BY] indicator is still on.
2Remove the lower filter
●Withdraw the filter backwards along the rail in the direc-
tion of the arrow.
3Remove the inner filter
●Push up and lift the claw at the base of the inner filter,
followed by drawing out the filter.
4Clean the filter
●Clean the filter with water and dry it, avoiding direct sun-
light. In extremely soiled cases, use of a neutral deter-
gent is...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-30.png "Page 31
31
1Pull out the plug from the power outlet
●Pull out the power plug from the outlet while the [STAND
BY] indicator is still on.
2Remove the lower filter
●Withdraw the filter backwards along the rail in the direc-
tion of the arrow.
3Remove the inner filter
●Push up and lift the claw at the base of the inner filter,
followed by drawing out the filter.
4Clean the filter
●Clean the filter with water and dry it, avoiding direct sun-
light. In extremely soiled cases, use of a neutral deter-
gent is...")
31 1Pull out the plug from the power outlet ●Pull out the power plug from the outlet while the [STAND BY] indicator is still on. 2Remove the lower filter ●Withdraw the filter backwards along the rail in the direc- tion of the arrow. 3Remove the inner filter ●Push up and lift the claw at the base of the inner filter, followed by drawing out the filter. 4Clean the filter ●Clean the filter with water and dry it, avoiding direct sun- light. In extremely soiled cases, use of a neutral deter- gent is...
Page 32
![Page 32
32
Lamp replacementEXIT
Warning
Lamp replacementEXIT
EXIT
1000h
No Signal DVI-D
Cause (Details)
No device is connected to the DVI terminal.
The terminal is connected but there is no signal output.
[ Input the video signals.
When lamp time reaches 1000 hours
[ A message indicating “1000 h” will be displayed on the
screen.
●Press the [EXIT] button to clear the display.
At the moment when the accumulated lamp time reaches
1900 hours, a “Lamp replacement” message will be displayed.
In addition, when the...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-31.png "Page 32
32
Lamp replacementEXIT
Warning
Lamp replacementEXIT
EXIT
1000h
No Signal DVI-D
Cause (Details)
No device is connected to the DVI terminal.
The terminal is connected but there is no signal output.
[ Input the video signals.
When lamp time reaches 1000 hours
[ A message indicating “1000 h” will be displayed on the
screen.
●Press the [EXIT] button to clear the display.
At the moment when the accumulated lamp time reaches
1900 hours, a “Lamp replacement” message will be displayed.
In addition, when the...")
32 Lamp replacementEXIT Warning Lamp replacementEXIT EXIT 1000h No Signal DVI-D Cause (Details) No device is connected to the DVI terminal. The terminal is connected but there is no signal output. [ Input the video signals. When lamp time reaches 1000 hours [ A message indicating “1000 h” will be displayed on the screen. ●Press the [EXIT] button to clear the display. At the moment when the accumulated lamp time reaches 1900 hours, a “Lamp replacement” message will be displayed. In addition, when the...
Page 33
![Page 33
33
About warning indicators
If abnormality occurs in this unit during projection, the warning mode w\
ill be triggered and the type of abnormality will be
indicated by a combination of indicators displayed on the control panel.\
This unit will then automatically stop projection and run
the cooling fan for about 90 seconds.
Warning
No.
Actions to be taken upon warning indications
Please follow the procedures below.
For Nos. 1-3
No. 1: Perform procedures to turn on/off the power again.
No. 2: After...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-32.png "Page 33
33
About warning indicators
If abnormality occurs in this unit during projection, the warning mode w\
ill be triggered and the type of abnormality will be
indicated by a combination of indicators displayed on the control panel.\
This unit will then automatically stop projection and run
the cooling fan for about 90 seconds.
Warning
No.
Actions to be taken upon warning indications
Please follow the procedures below.
For Nos. 1-3
No. 1: Perform procedures to turn on/off the power again.
No. 2: After...")
33 About warning indicators If abnormality occurs in this unit during projection, the warning mode w\ ill be triggered and the type of abnormality will be indicated by a combination of indicators displayed on the control panel.\ This unit will then automatically stop projection and run the cooling fan for about 90 seconds. Warning No. Actions to be taken upon warning indications Please follow the procedures below. For Nos. 1-3 No. 1: Perform procedures to turn on/off the power again. No. 2: After...
Page 34
![Page 34
34
●This unit uses a microcomputer. External noise may cause it to malfuncti\
on. If this happens, turn off the power and remove
the plug from the power outlet. Insert plug again into the outlet and ch\
eck operation of the unit. (See Pages 20, 21 on how to
turn on/off the power of the unit.)
•Is the power cord disconnected?
• Is the lamp cover properly shut?
• Is the filter cover properly shut?
• Has the lamp life expired? (Has the lamp
usage time reached 2000 hours?)
• Is the lens cap removed?
• Is...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-33.png "Page 34
34
●This unit uses a microcomputer. External noise may cause it to malfuncti\
on. If this happens, turn off the power and remove
the plug from the power outlet. Insert plug again into the outlet and ch\
eck operation of the unit. (See Pages 20, 21 on how to
turn on/off the power of the unit.)
•Is the power cord disconnected?
• Is the lamp cover properly shut?
• Is the filter cover properly shut?
• Has the lamp life expired? (Has the lamp
usage time reached 2000 hours?)
• Is the lens cap removed?
• Is...")
34 ●This unit uses a microcomputer. External noise may cause it to malfuncti\ on. If this happens, turn off the power and remove the plug from the power outlet. Insert plug again into the outlet and ch\ eck operation of the unit. (See Pages 20, 21 on how to turn on/off the power of the unit.) •Is the power cord disconnected? • Is the lamp cover properly shut? • Is the filter cover properly shut? • Has the lamp life expired? (Has the lamp usage time reached 2000 hours?) • Is the lens cap removed? • Is...
Page 35
35 9876 54321 8 16 24 7 15 23 6 14 22 3 11 19 2 10 18 5 13 21 4 12 20 1 9 17 Pin Arrangement TMDS = Transition Minimized Differential Signaling DDC = Display Data Channel Terminal Description Pin No. 1 2 3 4 5 Signal Name N/CRDTD N/C GND Pin No. 6 7 8 9 Signal Name N/C N/C N/C N/C Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Signal Name TMDS data 2- TMDS data 2+ TMDS data 2/4 shield N/C N/C DDC clock DDC data N/C TMDS data 1- TMDS data 1+ TMDS data 1/3 shield N/C Pin No. 13 14 15 16 17 18 19 20 21 22 23 24 Signal...
Page 36
![Page 36
36
[[
[[
Control of this unit via a computer is possible by connecting the comput\
er to this unit with a RS-232C cross cable (D-sub 9
pins). The commands to control this unit and the response data format a\
gainst the received commands are explained here.
For details, please consult your authorized dealer.
1. Communication SpecificationsCommunication specification for this unit are as follows:
2. Command Format
2-1. Command data format When sending a control command to this unit, use the following...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-35.png "Page 36
36
[[
[[
Control of this unit via a computer is possible by connecting the comput\
er to this unit with a RS-232C cross cable (D-sub 9
pins). The commands to control this unit and the response data format a\
gainst the received commands are explained here.
For details, please consult your authorized dealer.
1. Communication SpecificationsCommunication specification for this unit are as follows:
2. Command Format
2-1. Command data format When sending a control command to this unit, use the following...")
36 [[ [[ Control of this unit via a computer is possible by connecting the comput\ er to this unit with a RS-232C cross cable (D-sub 9 pins). The commands to control this unit and the response data format a\ gainst the received commands are explained here. For details, please consult your authorized dealer. 1. Communication SpecificationsCommunication specification for this unit are as follows: 2. Command Format 2-1. Command data format When sending a control command to this unit, use the following...
Page 37
37 3Special parameters Parameters for input video image format Operation mode parameters 3. External control command table Operation mode: Only Asking command is possible Character0000 0001 0002 0004 Hex 30h 30h 30h 30h 30h 30h 30h 31h 30h 30h 30h 32h 30h 30h 30h 34h Meaning Standby mode Power-on mode Cool down mode Emergency mode Operate HIDE Left/Right Reversal Top/Bottom Inversion Operation Mode U0F U00 U17 U18 Z03 Power On ELSE Numeric Value ON/OFF Asking Data...
Page 38
![Page 38
38D-ILAD-ILA1080MF2 D-ILA Home Theatre Projector
D-ILA*
1(Reflective Active Matrix Principle)
D-ILA Device*2/0.82 (1920 pixels x 1080 pixels) x 3 (Total no. of pixels: Approx. \
6,220,000)
x 1.3 zoom lens (1.8:1 to 2.35:1) (Zoom/Focus adjustment: manual)
250 W Ultra-high Pressure Mercury Lamp
[Part No.: BHL5006-S / Rating: 250 W]
Approx. 40 to 200 (Aspect ratio: 16:9)
Approx. 1.5 m to 12 m
1080/60p signal, 1080/50p signal
1920 dots x 1080 dots
Horizontal : 56.25 kHz, 67.43 kHz, 67.5 kHz
Vertical : 50...](http://img.usermanuals.tech/thumb/5778/91866/w300_meridian-d-ila1080mf2-manual_d-37.png "Page 38
38D-ILAD-ILA1080MF2 D-ILA Home Theatre Projector
D-ILA*
1(Reflective Active Matrix Principle)
D-ILA Device*2/0.82 (1920 pixels x 1080 pixels) x 3 (Total no. of pixels: Approx. \
6,220,000)
x 1.3 zoom lens (1.8:1 to 2.35:1) (Zoom/Focus adjustment: manual)
250 W Ultra-high Pressure Mercury Lamp
[Part No.: BHL5006-S / Rating: 250 W]
Approx. 40 to 200 (Aspect ratio: 16:9)
Approx. 1.5 m to 12 m
1080/60p signal, 1080/50p signal
1920 dots x 1080 dots
Horizontal : 56.25 kHz, 67.43 kHz, 67.5 kHz
Vertical : 50...")
38D-ILAD-ILA1080MF2 D-ILA Home Theatre Projector D-ILA* 1(Reflective Active Matrix Principle) D-ILA Device*2/0.82 (1920 pixels x 1080 pixels) x 3 (Total no. of pixels: Approx. \ 6,220,000) x 1.3 zoom lens (1.8:1 to 2.35:1) (Zoom/Focus adjustment: manual) 250 W Ultra-high Pressure Mercury Lamp [Part No.: BHL5006-S / Rating: 250 W] Approx. 40 to 200 (Aspect ratio: 16:9) Approx. 1.5 m to 12 m 1080/60p signal, 1080/50p signal 1920 dots x 1080 dots Horizontal : 56.25 kHz, 67.43 kHz, 67.5 kHz Vertical : 50...
Page 39
39 181 2067.5 298 89 26715 2 7 38.2 298 300 360 292 92.38.2 115.9 65.4 25~56 109 36.2 Dimensions (Unit: mm) Top Front Side Bottom M6 (Depth: 10 mm) Mounting screw should be more than 6 mm but less than 10 mm in length. Center of Lens
Page 40
MF2MIman v0.90ß • 20060403 Meridian Audio Limited Latham Road, Huntingdon, Cambridgeshire PE29 6YE United Kingdom Tel +44 (0) 1480 445678 Fax +44 (0) 1480 445686 Web: www.meridian-audio.com Faroudja is a trademark of Genesis Microchip Inc.Other trademarks are the property of their respective owners. Meridian America Inc 8055 Troon Circle, Suite C Austell, Atlanta GA 30168-7849 USA Tel +1 (404) 344 7111 Fax +1 (404) 346 7111 Email: [email protected] Design and specifications are subject to change...