Meridian D Ila1080mf2 Digital Video Projector User Manual

21
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
LAMPTEMPSTAND BYOPERATE
PRESET
MENUEXIT
ENTER
HIDE
5-1
5-1
4 4
LAMP TEMP STAND BYOPERATE
4Hiding the image temporarily
Press [HIDE]
●
The displayed image will disappear.
● Press [HIDE] again to restore the image.
5Turning off the power
1
Press the [OPERATE] button on this unit (or the [OPERATE
OFF] button on the remote control unit) for 1 second or more
● The [OPERATE] indicator turns off, the [STAND BY] indicator starts
blinking and this unit...

22
Image adjust
Set up
Options
InformationGREENGREENBLUEBLUE
REDRED
GammaGammaNORMALACUSTOMBColor tempColor temp.
T est patter nUSER2USER1
D65
ENTERENTER
Image adjust
Options
InformationMen u PositionMaskMaskOff5%
2.5%Source50P
60PSet up
Image adjust
Set up
InformationPicture ShiftPicture ShiftSleep timeSleep time
Flip  V
Men
Menu displa
y15secOnOn Off
15min15minOffOff30min30min60min60min960019200
On
0OffFlip H
RS232C(bps)
RS232C(bps)
Options
Image adjust
Set upLamp Lamp TimeTime905h
OptionsInformation...

23
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
LAMPTEMPSTAND BYOPERATE
PRESET
MENUEXIT
ENTER
HIDE
MENUMENU
ENTERENTER
EXITEXIT
ENTER
ENTER
Menu Operation Buttons
The menus are operated using buttons on this unit or remote control unit\
.
Button
Function
Displays the main menu.
●Press to clear the menu screen
when the menu is displayed.
Confirm the selected item on the main
menu.
● Press [ENTER] when the “Test
Pattern” item is selected to project
the test pattern on the screen. After
it is...

24
LAMPTEMPSTAND BYOPERATE
MENUEXIT
ENTER
4
4
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
1, 6
1, 6 2, 3
2, 3
1Press the [MENU] button
●
 The main menu is displayed on the screen.
2Press [ 5/∞ ] to select a main menu item and [ENTER]
to confirm
● The “Information” menu does not have a setting menu (submenu).
3Press [ 5/∞ ] to select an adjustment item and [ 2/3 ]
to change the setting value
4After setting is completed, press [EXIT]
● Each time you press the button, the menu returns to the...

25
¥¥¥
¥
¥
¥
¥
¥
Item values shown in { } are factory settings.
1 “Image adjust” Menu
To adjust images.
On the “Image adjust” menu, you can adjust the following items.
“Gamma”
Switches the gradation characteristics of the image. Select
your preference setting values according to the image to be
viewed.
Setting Values : “NORMAL”, “A”, “B”, “CUSTOM” {“NORMAL”}
“CUSTOM” : Use when setting Gamma with optional soft- ware. The picture quality is same as “NOR-
MAL” for factory setting.
“Color temp.”
Adjusts...

26
PRESET
MENUEXIT
ENTER
HIDE
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
2, 5
2, 5 3, 4
3, 4
Screen Masking
Images for which quality at the outer area has deteriorated can be proje\
cted by masking (hiding) the outer area of the projected
image.
1 Project image onto the screen
2Press the [MENU] button
● The main menu is displayed on the screen.
3Press [ 5/∞ ] to select “Set up”, followed by pressing
[ENTER]
● The “Set up” menu appears on the right side of the screen.
4Press [ 5/∞ ] to...

27
PRESET
MENUEXIT
ENTER
HIDE
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
2, 5
2, 5 3, 4
3, 4
Image adjust
Set up
Options
InformationGREENGREENBLUEBLUE
REDREDColor tempColor temp.
T est patter
est pattern
USER2USER2USER1USER1D65D65
ENTER
GammaGammaNORMALNORMALACUSTCUSTOMOMB
Image adjust
Set up
InformationPicture ShiftPicture ShiftSleep timeSleep time
Flip Flip VOnOnOffOff
15minOff30min 60min960096001920019200
OnOn0OffOffFlip HFlip H
RS232C(bps)RS232C(bps)
Options
MenMenu displau...

28
Light-source Lamp and Lamp Usage Time
The light-source lamp has a service life. The life of lamps used for thi\
s unit is about 2000 hours.
●The lamp life of 2000 hours is merely the average life span of lamps and\
 we do not provide any guarantee for this figure. The
lamp life may not reach 2000 hours depending on the operating conditions\
.
When the light-source lamp approaches the end of its service life, deter\
ioration progresses rapidly. Get ready or replace with  a
new lamp (lamp unit) when...

29
Handle
Lamp Unit
2Loosen the screws on the lamp unit and
lift up the handle
●Loosen the 2 screws with a  ª screwdriver.
3Pull out the lamp unit
4Insert the new lamp unit until it is fully in
5Tighten the screws of the lamp unit and
close the handle
●Fasten the 2 screws with a  ª screwdriver.
6Attach the lamp cover and fasten the
screws
●Fasten the 2 screws with a  ª screwdriver.
Caution
Do not touch the glass surface of the lamp directly with
your hand or stain it. Touching it with a bare hand may...

30
EXIT
PRESET
HIDE
ON
ENTER
OFF
FOCUSTEST
MENUEXIT
PRESETHIDE
LIGHT
OPERATE
[PRESET] [HIDE]
[5 ]
[EXIT]
Resetting Lamp Time
After installing a new lamp (lamp unit), reset the lamp time. The lamp\
 time counter will be reset and a new count will start.
If display of the accumulated lamp time has reached 2000 hours, this uni\
t will not work (lamp does not light up) unless the lam
p
time is reset.
1Insert plug into the power outlet
● The [STAND BY] indicator on the unit lights up when the main power is...