Marantz Vp8600bl DLP Projector User Manual

16
ENGLISH
The projector has an On-Screen Display (OSD) that lets you make picture adjustment and
change various settings. ❖
Navigating the OSD
Press MENUto open the OSD, and then use the arrow buttons (up/down 
34
, left/right 
12
) to
navigate and make changes. Press ENTERto enter menus and confirm settings. Press the
EXITbutton to exit menus. Press MENUto close the OSD.
The example below demonstrates how to change the Brightnesssetting in the Picture
Adjustmenu, and then navigate to the Horizontal...

17
ENGLISH
EnglishItalianoDeutsch
RedGreenBlueBlack
FrontF+Ceiling
Rear
R+Ceiling
Picture Adjust
Brightness
Main Menu
ItemMain Menu
Item
ContrastColorTint
LB / THTR / STD / DYN / HBSharpness*
1
Gamma
P.18
64
-63
64
-63
12 064
-63
64
-63
Color Temp.W-PEAK1 / 2 / 3 / 4
ON / OFFReadjust*
2
Reset
Display
Component 1
Horizontal SizeVertical SizeAspectYP
bPr / SCART / RGB
Full / Normal / Zoom1 / Zoom2
V-MutePicture Shift
P.19
127
-128
127-128
Reset1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
Continue / 10s / 20s
Config....

18
ENGLISH
Press MENUto open the OSD. If necessary, press 
34
to move to the Picture Adjustmenu
and press ENTER. Press 
34
to move up and down in the Picture Adjustmenu. Press 
12
to
adjust values and press ENTERto confirm the setting.
Picture Adjust Menu (Video)
ITEM
Brightness
Contrast
Color
Tint
Sharpness
Gamma
Color Temp.
W-PEAK
ResetDESCRIPTION
Press 
12
to adjust the brightness. (Range: –63 to 64)
Press 
12
to adjust the contrast. (Range: –63 to 64)
Press 
12
to adjust the color. (Range: –63 to...

19
ENGLISH
Press MENUto open the OSD menu. Press 
34
to move to the Displaymenu and press
ENTER. Press 
34
to move up and down in the Displaymenu. Press 
12
to adjust values and
press ENTERto confirm the setting.
Display Menu (PC/HD and Video) 
ITEM
Component 1
Horizontal size
Vertical size
Aspect
V-Mute
Picture Shift 
ResetDESCRIPTION
Press 
12
to change the source for component 1. 
Range: (
P.7, 8)
1. YP
bPr
– YP
bPr
– sync on green
2. SCART
3. RGB – RGBHV (5–cable)
Press 
12
to adjust the screen size...

20
ENGLISH
ITEM
PIP input
PIP Horizontal ShiftPIP Vertical Shift
PIP Window SizeDESCRIPTION
Press 
12
to select the PIP input.
Press 
12
to adjust the horizontal position of the PIP window.
(Range:–128 to 127
)
Press 
12
to adjust the vertical position of the PIP window.
(Range:
–128 to 127
)
Press 
12
to adjust the size of the PIP window.
(Range:
–128 to 127
)
DEFAULT
*1
–128
–128
*1
Press Info.to open Informationmenu. The Informationmenu items are displayed only.Information Menu
ITEM
Input
Resolution...

21
ENGLISH
MAINTENANCE
❖
Lamp Hour
Display the lamp life by pressing the INFO. button on the remote controller.
Notes:
•The maximum life limit of the lamp is 4,000 hours. Although we care very much about
quality, the lamp can rarely breaks down if running time exceeds 3,000 hours. Therefore
we recommend to replace the lamp if Lamp Hour gets over 3,000 hours. The lamp needs
to be replaced with-in the maximum life limit.
•This product is checked under strict quality control when it is shipped out form...

22
ENGLISH
❖
Problem: No image appears on the screen
1.Verify the settings on your video source.
2.
Turn off all equipment and power up again in the correct order.
❖
Problem: The image is blurred
1.Adjust the Focuson the projector.
2.
Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
3.
Check that the projector lens is clean.
❖
Problem: The image is wider at the top or bottom (trapezoid effect) 
1.Position the projector so it is as perpendicular to the screen as...

23
ENGLISH
❖
Problem: There is no light from the projector 
1.Check that the power cable is securely connected.
2.
Ensure the power source is good by testing with another electrical device.
3.
Restart the projector in the correct order and check that the Power LED is blue.
4.
Have the lamp module replaced. 
❖
Problem: The lamp goes off
1.Power surges can cause the lamp to turn off. Press the power button to turn off the
projector. When the Lamp Ready LED is on, press the power button.
2.
Have the lamp...

24
ENGLISH
❖
Optical characteristicsPanel0.8 inch 16:9
1280 x 720 pixels
Digital Micromirror Device
Lamp200W AC
Lensf: 32.5 to 44.0mm
F: F2.5
Projection size
60 to 300 inches 
❖
Input/OutputVIDEO INRCA x 1
NTSC-3.58/PAL-4.43/SECAMComposite video 1.0Vp-p/75 Ohm
S-VIDEO INS-Connector x 1NTSC-3.58/PAL-4.43/SECAMS-Video
COMPONENT3RCA x 1(Y, P
B, P
R)
IN5RCA x 1
(G/Y, B/P
B, R/P
R, H, V)
RGB/HD IND-sub M 15 pin x 1
Analog RGB
HDMI INDVI-D x 1AC IN3 Prong Grounding Type
TRIG.1 OUT,Mini Jack x 2TRIG.2...

25
ENGLISH
6.16 (156.4)
6.17 (156.7)
7.06 (179.4)
17.13 (435.0)3.28
(83.3)
3.64
(92.5)
10.83 (275.0)
13.54 (344.0)
1.69 (43.0) 1.22
(31.0)
14.17 (360.0)
DIMENSIONS
Aspect ratio
Width and height ratio of an image. The
normal aspect ratio of a computer and
video image is 4 : 3. There are also wide
images with an aspect ratio of 16 : 9, 1.88 :
1 and 2.35 : 1.Color Temperature
White color hue.
Low color temperature implies a warmer
(more yellow/red) light.
High color temperature implies a colder
(more blue)...