Marantz Vp8600bl DLP Projector User Manual

6
ENGLISH
The remote control uses infrared transmission to control the projector. It is not necessary to
point the remote directly at the projector. Provided you are not holding the remote
perpendicular to the sides of the projector, the remote will function well within a radius of about
5 meters and 30 degrees above or below the projector level. If the projector does not respond
to the remote control, try bouncing the IR signal off the screen or move a little closer to the
projector.
60
5m
Remote...

7
ENGLISH
CONNECTION
S-VIDEO OUT
VIDEO OUT
VCR
S-video cable (commercially available)
Video cable
(commercially available)
❖
When making connections be sure to:•Turn off all equipment before making any connections.
•Use the proper cables for each connection.
•Securely insert the plug into the port to connect cables. Loose cables can lead to trouble
and damage.❖
When pulling out a cable:•Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of the...

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Player/Satellite
/Cable Tuner /PC using DVI-D IN port.1.
Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to
the DVI-D IN port on the projector.
2.
Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or
personal computer.
Note :When projecting a video image from a device connected to the DVI-D terminal,
follow the procedure below.
1. Turn on power of this unit.
2....

9
ENGLISH
34$
RS-232C cable 
(straight type,
commercially available)
External Controller
Screen
3.5mm Mini Plug (Mono)
(commercially available)
You can control total home theater system using PC.
For installing below system, consult with Marantz authorized dealer.Advanced Connection
71@FOH
 
 
 
 
 .
 
 

10
ENGLISH
INITIAL SETTING
1.
Connect the mains cord to the projector. Connect the other end to a wall outlet.
Turn on the main power switch. The Power LED blinks (blue) slowly.
2.
Remove the lens cover.
3.
Turn on the connected devices. 
4.
Press the ONbutton on the remote controller to turn on the projector. 
The Power LED lights blue and the projector splash screen displays.
5.
Press the INPUT
3or INPUT
4key to select the input signal source.
Turning on the Power
1.
Use the ZOOMring (on the projector)...

11
ENGLISH
There are hot keys on the remote control that let you adjust contrast, sharpness, tint, color,
brightness. When you press one of these hot keys, a slide bar is overlayed on the source
image. Use the +/– button to adjust the value. Press the EXITbutton to close an image slide
bar, or press an image hot key to automatically close the current slide bar and open the next.❖
Contrast Control
Use the contrast control to adjust the contrast between light and dark areas of the projected
image.1.
Press...

12
ENGLISH
❖
Aspect Control
Use the aspect control to adjust the aspect ratio of the
projected image.
An aspect ratio can be directly selected by pressing
one of the FULL, NORMAL, ZOOM1and ZOOM2
buttons on the remote control, or it can be selected
from the menu (

P.19)
The following settings are supported:
C1 C2 S F
DV1 RGB V NTHTR
STD DYN Z1
HB CT Z2
LB
COMP.1 COMP.2 S VIDEO FULL
DVI RGB VIDEONORMAL
THEATER STANDARD DYNAMICZOOM1LOW HIGH-BRIGHT-
C-TEMPZOOM2
F
N
Z1
Z2 FULL
NORMAL
ZOOM1
ZOOM2
ASPECT...

13
ENGLISH
•Press the NORMALbutton on the remote controller for the 4:3 aspect ratio video source.
•Press the FULLbutton on the remote controller for 16:9 aspect ratio video source, such as
1080i, 1035i, and 720p video systems.
•Press the FULL, ZOOM 1or ZOOM 2button on the remote controller for the squeezed
video source.The Screen Images in a 4:3 screen❖
Original Source Image
❖
Full mode
The 16:9 squeezed image is displayed with
the correct aspect.❖
Normal mode
❖
Zoom 1 mode
16 : 9  video source
The 4:3...

14
ENGLISH
❖
16 : 9 Screen
In case of displaying the
16:9 picture on the whole
of the 16:9 screen.❖
4 : 3 Screen
In case of displaying the
16:9 picture on the whole
of the 4:3 screen.
Width
Height
: Image size: Screen size
Width
Height
: Image size = Screen size
Screen Size and Projection Distance (inch)  VP8600
Diagonal Width Height Minimum Maximum
inch inch inch inch inch
52.29 
61.01 
62.75 
69.72 
71.47 
73.21 
78.44 
80.18 
87.16 
92.38 
95.87 
104.59 
107.20 
115.92 
117.66 
130.73 
148.16 
174.31...

15
ENGLISH
Screen Position
0% (Center) (+100%)
+50% VP8600
Screen Height = 1H 0.6H 
Up
0.25H 
Up +120%
Lens shift Range
❖
Standard condition (From +50% to +120%)Lens shift position
71@FOH
 
 
 
 
 .