Marantz Vp 15s1 DLp Projector User Manual

3
ENGLISH
FEATURES•Incorporates the latest DLP
®chip -- “1080p DLP
®” (1920 x 1080 pixel, 16:9 wide panel). Using an
optimized system for movie viewing with specially designed image circuits and optical parts, the VP-
15S1 bring high color reproduction with the pitch black of movie films that reproduces images in rich
tones and crisp black.
•Images are sharply detailed, smooth and high quality owing to a powerful chip that builds into a
dedicated processor an image processing IC featuring Gennum’s proud...

4
ENGLISH
!3
!4
qFocus ring (

P.11)
Adjust the picture focus.wZoom ring (

P.11)
Adjust the size of the projected image.eLens Shift knob (

P.12)
Manually adjust the position of the image vertically.r/ I button (

P.18)
Press to turn the projector ON or STANDBY mode. tMENU button (

P.21)
Display the on-screen menu.Front and Top ViewPROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW
yENTER buttonPress to enter the selected menu item.uINPUT SELECT button (

P.18)
Selects the input signal (COMPONENT 1,...

5
ENGLISH
Rear and Terminals ViewzAC IN (

P. 9 )
Connect the supplied AC power code.xRGB INConnect the analog RGB output from an IBM VGA
or compatible equipment.cCOMPONENT VIDEO IN 1 and 2Terminals 1 and 2 have each Y, P
B/CB, P
R/CR
terminals. Connect them to the component video
output of a video device, AV amp/processor, DVD
player, etc.vS-VIDEO INConnect the S-VIDEO output from a video
equipment.bVIDEO INConnect the composite video output from a video
equipment.
nTRIG.1(TRIGGER 1)When the unit is...

6
ENGLISH
Remote Controller
INPUT V-MUTE
ENTERMENU
ASPECT
FULL CINEMA
VCR MODE
BLACK LEVEL
PATTERN
BLACK
NOR ZOOM THRUINFO.
C1 C2 S G1
H1 H2 V G2A1
A2 RGB G3
STD DYN
I M
AG4
THTRCOMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1
BLANKING AUX 2
RC-11VPS1 REMOTE CONTROLLER
ON
STANDBYIRIS LAMP
C.TEMP GAMMA
B1
OFF
B3
B2
a
™9
£0
£1
£2
£3
£4
£5
£6
£8
£9 sdfg
hjk
l¡0¡1
¡2¡3¡4
¡5¡6¡7
¡8¡9 ™0 ™1
™2
™3
™4
™5
™6
™7 ™8¢0
£7¢1
aSTANDBY button (

P.20)
Turn the projector off.sIRIS buttonSwitches lens and...

7
ENGLISH
£7INPUT (Input signal select)
button (

P.18)
Selects the input signal. Every time the 3/4
buttons are pressed, the input signal rotates in the
order of COMPONENT 1 ↔COMPONENT 2 ↔S-
VIDEO ↔VIDEO ↔RGB ↔HDMI 1 ↔HDMI 2.£8BLACK LEVEL button (

P.26)
Sets the black level.
During analog signal input ......0 IRE/7.5 IRE
During HDMI signal input ........Expand/Normal£9PATTERN button (

P.11)
Projects a focus pattern on the screen.¢0ZOOM button (

P.18)
Sets aspect ratio to zoom mode.¢1THROUGH...

8
ENGLISH
Operate the remote controller within a distance of approximately 5m from the IR sensor (remote sensor)
on the projector.
Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the
direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.
60
120
5m
5m
60
5m
60
5m
VP-15S1
VP-15S1
60
5m
VP-15S1
Remote Controller Operational Range
Remote
ControllerRemote
Controller
Remote
ControllerRemote
Controller...

9
ENGLISH
CONNECTION
❖
When making connections be sure to:•Turn off all equipment before making any connections.
•Use the proper cables for each connection.
•Securely insert the plug into the port to connect cables. Loose cables can lead to trouble and damage.❖
When pulling out a cable:•Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of the projector.
The STANDBY indicator lights up and the projector goes into the standby mode.Note :
Make sure the...

10
ENGLISH
You can connect this projector to HD-Video /PC using RGB IN port, or DVD Plyer /Satellite /Cable Tuner
/PC using HDMI IN port.1.
Connect one end of the RGB cable to the RGB IN port, or one end of the HDMI cable to the HDMI IN
port on the projector.
2.
Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal
computer.
3.
If using DVI-A or DVI-D output, use respectively a DVI-A-RGB or DVI-D-HDMI conversion cable.
Note :
When projecting a video image from...

11
ENGLISH
INITIAL SETTING
1.
Connect the supplied AC power cord. (

P.9)
2.
Press the ONbutton on the remote controller or the / Ibutton on the projector.
The ON indicator lights up.
Project an image on the screen roughly at first.
1.
Turn the Zoom ringand adjust to the desired size
within the zoom range.
WIDE: Enlarges (zooms in) the projected image.
TELE: Reduces (zooms out) the projected image.
2.
Turn the Focus ringuntil the image on the screen
becomes clear.Zooming and Focusing
C1 C2 S G1
H1 H2 V...

12
ENGLISH
You can position the projected image by changing the
height of the projector’s adjusters.1.
Move the adjuster lever to the left or right to
enable adjuster changing. Carefully lift the
projector.
2.
Once having positioned the projector, return the
adjuster lever as before to lock in place. Check
the adjusters are securely locked before
releasing your hands from the projector.
3.
Turn the adjuster to fine-adjust the height.
❖
Returning the Projector to its Initial Position
Slightly lift the...