Marantz Vp 11s2l DLP Projector User Manual
Have a look at the manual Marantz Vp 11s2l DLP Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 38 Marantz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
8 ENGLISH Operate the remote controller within a distance of approximately 5m from the IR sensor (remote sensor) on the projector. Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor. 60 120 5m 5m 60 5m 60 5m VP-11S2 VP-11S2 60 5m VP-11S2 Remote Controller Operational Range Remote ControllerRemote Controller Remote ControllerRemote Controller Remote Controller 1. Take the cover off the battery case on the remote control backside. 2. Insert two AAA size batteries. Make sure the polarities match the + and – marks inside the battery compartment. 3. Reattach the battery case cover as before. Notes :•Do not mix alkaline and manganese batteries.•Do not mix old and new batteries. CAUTIONS ON BATTERIES •Use AAA alkaline batteries in this remote controller. •If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less then a year has passed. •The included battery is only for verifying operation. Replace it with a new battery as soon as possible. •When inserting the batteries, be careful to do so in the proper direction, following the + and - marks in the remote control unit’s battery compartment. •To prevent damage or battery fluid leakage: - Do not use a new battery with an old one. - Do not use two different types of batteries. - Do not short-circuit, disassemble, heat or dispose of batteries in flames. •Remove the batteries when not planning to use the remote control unit for a long period of time. •If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries. •When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. AAA size batteries Battery case cover Battery case cover Preparing the Remote Controller 714@6@@&/( .
9 ENGLISH CONNECTION ❖ When making connections be sure to:•Turn off all equipment before making any connections. •Use the proper cables for each connection. •Securely insert the plug into the port to connect cables. Loose cables can lead to trouble and damage.❖ When pulling out a cable:•Be sure to grab the plug, not the cable itself. Connect the supplied AC power cord into the AC IN socket of the projector. The STANDBY indicator lights up and the projector goes into the standby mode.Note : Make sure the AC power cord is firmly connected into the AC IN socket. Connection with AC Power Supply FL OFF STANDBY FL OFF STANDBYS-VIDEO OUT VIDEO OUT COMPONENT VIDEO OUTCOMPONENT VIDEO OUT Component cable (commercially available) DVD PlayerDVD Player VCR S-video cable (commercially available) Video cable (commercially available) Component cable (commercially available) You can connect this projector to a VCR, DVD player and other video equipment.Connecting a video source using S-VIDEO IN and VIDEO IN terminals.1. Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video cable to the VIDEO IN terminal on the projector. 2. Connect the other end of the S-video cable or the video cable to the S-video output terminal or video output terminal of the video source. Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 terminal (Devices can be connected to both terminals at the same time.)1. Connect the individual terminals of the component video cable into the COMPONENT VIDEO IN 1 or 2 terminal of the projector. 2. Connect the other end of the cable to the corresponding terminals on a DVD player.Connection with Video Equipments VAROLaite on liitettava suojamaadoitus-koskettimilla varustettuun pistorasiaan.SUOMIFORSIKTIGApparatet ma tilkoples jordet stikkontakt.KONGERIKET NORGEOBSERVERAApparaten skall anslutas till jordat uttag.SVENSKA 714@6@@&/( .
10 ENGLISH You can connect this projector to HD-Video /PC using RGB IN port, or DVD Plyer /Satellite /Cable Tuner /PC using HDMI IN port.1. Connect one end of the RGB cable to the RGB IN port, or one end of the HDMI cable to the HDMI IN port on the projector. 2. Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer. 3. If using DVI-A or DVI-D output, use respectively a DVI-A-RGB or DVI-D-HDMI conversion cable. Note : When projecting a video image from a device connected to the HDMI terminal, follow the procedure below. 1. Turn on power of this unit. ( P.18) 2. Set the input video source to HDMI input. ( P.18) 3. Turn on power of the device connected to the HDMI terminal of the unit (i.e. DVD player). If the procedure above is not followed, projected image may corrupt. For the details of the HDMI terminal on the device connected with the unit, see the instruction manual of the device. Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC RGB OUT or DVI-D out RGB OUT or DVI-D out RGB (D-Sub monitor) cable (commercially available) HD-Video / Satellite / Cable Tuner / DVD Player Monitor output IBM VGA or Compatible PC RGB OUT or DVI-A OUTDVI-D OUT or HDMI OUT HDMI-HDMI cable or HDMI-DVD-D cable (commercially available) RGB out or DVI-D out You can control total home theater system using PC or Marantz receiver equipment. For installing below system, consult with Marantz authorized dealer.Advanced Connection REMOTE CONTROL INREMOTE CONTROL OUT 34$ RS-232C cable (female-female, straight type, commercially available) External ControllerScreen 3.5mm Mini Plug (Mono) (commercially available) Control Adapter cable (commercially available) Receiver equipment Control Adapter cable (supplied) 714@6@@&/( .
11 ENGLISH INITIAL SETTING 1. Connect the supplied AC power cord. ( P.9) 2. Press the ONbutton on the remote controller or the / Ibutton on the projector. The ON indicator lights up. Project an image on the screen roughly at first. 1. Turn the Zoom ringand adjust to the desired size within the zoom range. WIDE: Enlarges (zooms in) the projected image. TELE: Reduces (zooms out) the projected image. 2. Turn the Focus ringuntil the image on the screen becomes clear.Zooming and Focusing C1 C2 S G1 H1 H2 V G2A1 A2 RGB G3 STD DYN G4 THTRCOMP.1 COMP.2 S-VIDEO USER HDMI 1 HDMI 2 VIDEO AUX 1 AUX 2 ON STANDBYIRIS LAMP C.TEMP GAMMA Turning on the Power You can strictly focus the image with focus pattern.1. Press the PATTERNbutton to project the focus pattern on the screen. 2. Turn the Focus ringto make an adjustment. Adjust the focus for the sharpest image possible to obtain, using focus pattern. 3. Press the PATTERNbutton again to hide the focus pattern. This completes fine focusing. Note :Focus Pattern Color by Lens Shift Position ( P.16) The focus pattern changes color depending on the lens position. There are two colors and they can be used for checking the quality of the projected image. The whitefocus pattern uses the highest optical performance to maximize the sharpness of the projected image. To enjoy the highest sharpness, it is recommended to position the lens within this range. When the lens is shifted outside the aforementioned range, the focus pattern turns green. Rough focusing in this range looses image sharpness. Adjusting the zoom position from WIDE to TELE enhances sharpness even at the same lens position. INPUT V-MUTE ENTERMENU ASPECT FULL CINEMA VCR MODE BLACK LEVEL PATTERN BLACK NOR ZOOM THRUINFO. I M A Detail Focusing 1. 2. TELE WIDE 714@6@@&/( .
12 ENGLISH You can position the projected image by changing the height of the projector’s adjusters.1. Move the adjuster lever to the left or right to enable adjuster changing. Carefully lift the projector. 2. Once having positioned the projector, return the adjuster lever as before to lock in place. Check the adjusters are securely locked before releasing your hands from the projector. 3. Turn the adjuster to fine-adjust the height. ❖ Returning the Projector to its Initial Position Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down. When the projecting image is a trapezoid, correct it in Keystone and in the Display Menu. See “Display”. ( P.28) When using the keystone feature to correct a trapezoidal image, picture contours can look like staircases because of image correction. ❖ Keystone (Electronic keystone correction)Keystone CorrectionAdjusting the Height You can adjust the image position with the Lens Shift knob.❖ Turn the Lens Shift knob to clockwise : The image goes up. ❖ Turn the Lens Shift knob to counterclockwise : The image goes down.Adjusting the Image PositionUp Down CounterclockwiseClockwise 714@6@@&/( .
13 ENGLISH ❖ Mounting on the ceilingCAUTION–For ceiling installation, consult with Marantz authorized dealer. –Do not look into the lens when the projector is turned on. It could damage your eyesight. INSTALLATION ❖ Installing on a tabletopRecommended Setting Screen Screen size (vertical) Screen upper end Range from light axis to upper end Light axis (center)Height from installing level to light axis Screen lower end Projection distance lens head Lens shift range Screen Screen upper end Range from light axis to upper end Light axis (center) Height from installing level to light axis Installing level Screen size (vertical) Screen lower end Projection distance lens head Lens shift range 714@6@@&/( .
14 ENGLISH ❖ 16 : 9 Screen In case of displaying the 16:9 picture on the whole of the 16:9 screen.❖ 4 : 3 Screen In case of displaying the 16:9 picture on the whole of the 4:3 screen. VP-12S1 Screen Size and Projection Distance (inch) VP-11S2 Diagonal Width Height Minimum Maximum inch inch inch inch inch 61 62 12/16 69 12/16 71 8/16 73 3/16 78 7/16 80 3/16 87 3/16 92 6/16 95 14/16 104 9/16 107 3/16 115 15/16 117 11/16 130 12/16 148 3/16 174 5/16 217 14/1634 5/16 35 5/16 39 4/16 40 3/16 41 3/16 44 2/16 45 2/16 49 51 15/16 53 15/16 58 13/16 60 5/16 65 3/16 66 3/16 73 9/16 83 6/16 98 1/16 122 9/1688 6/16 90 15/16 101 5/16 103 14/16 106 7/16 114 3/16 116 13/16 127 2/16 134 14/16 140 1/16 153 156 14/16 169 12/16 172 6/16 191 12/16 217 9/16 256 6/16 321129 1/16 132 13/16 147 13/16 151 9/16 155 5/16 166 8/16 170 4/16 185 4/16 196 7/16 203 15/16 222 11/16 228 4/16 247 250 12/16 278 13/16 316 4/16 372 6/16 465 15/16 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 To calculate the installation measurement (unit : inch) Minimum = 1 5/16 x Screen Size - 2 2/16 Maximum= 1 14/16 x Screen Size - 1 15/16 Note : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table.16:9 Screen Size (1.77:1 Aspect Ratio) Projection Distance Screen size (Diagonal) Projection distance Screen Diagonal Width Height Minimum Maximum inch inch inch inch inch 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 25056 57 10/16 64 65 10/16 67 3/16 72 73 10/16 80 84 13/16 88 96 98 6/16 106 6/16 108 120 136 160 20042 43 3/16 48 49 3/16 50 6/16 54 55 3/16 60 63 10/16 66 72 73 13/16 79 13/16 81 90 102 120 150108 8/16 111 10/16 124 5/16 127 7/16 130 10/16 140 1/16 143 4/16 155 14/16 165 6/16 171 11/16 187 8/16 192 4/16 208 211 3/16 234 14/16 266 8/16 313 14/16 392 14/16158 5/16 162 14/16 181 3/16 185 13/16 190 6/16 204 2/16 208 11/16 227 240 12/16 249 14/16 272 12/16 279 10/16 302 9/16 307 2/16 341 7/16 387 4/16 455 14/16 570 6/16 To calculate the installation measurement (unit : inch) Minimum = 1 9/16 x Screen Size - 2 2/16 Maximum= 2 5/16 x Screen Size - 1 15/16 Note : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table.4:3 Screen Size (1.33:1 Aspect Ratio) Projection Distance ❖ 16 : 9 Screen In case of displaying the 16:9 picture on the whole of the 16:9 screen.❖ 4 : 3 Screen In case of displaying the 16:9 picture on the whole of the 4:3 screen. VP-12S1 Screen Size and Projection Distance (mm) VP-11S2 Diagonal Width Height Minimum Maximum inch mm mm mm mm 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 To calculate the installation measurement (unit : mm) Minimum = 32.8 x Screen Size - 53.4 Maximum= 47.5 x Screen Size - 48.8 Note : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table.16:9 Screen Size (1.77:1 Aspect Ratio) Projection Distance 1550 1594 1771 1815 1860 1992 2037 2214 2347 2435 2657 2723 2944 2989 3321 3763 4428 5535 872 897 996 1021 1046 1121 1146 1245 1320 1370 1494 1532 1656 1681 1868 2117 2491 3113 2243 2308 2571 2636 2702 2899 2964 3227 3423 3555 3883 3981 4309 4375 4867 5523 6507 8147 3276 3371 3751 3846 3941 4226 4321 4701 4986 5176 5651 5794 6269 6364 7076 8026 9451 11826 Diagonal Width Height Minimum Maximum inch mm mm mm mm 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 To calculate the installation measurement (unit : mm) Minimum = 40.1 x Screen Size - 53.4 Maximum= 58.1 x Screen Size - 48.8 Note : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table.4:3 Screen Size (1.33:1 Aspect Ratio) Projection Distance 1422 1463 1626 1666 1707 1829 1869 2032 2154 2235 2438 2499 2703 2743 3048 3454 4064 5080 1067 1097 1219 1250 1280 1372 1402 1524 1615 1676 1829 1875 2027 2057 2286 2591 3048 3810 2754 2834 3155 3235 3315 3556 3636 3957 4197 4358 4759 4879 5280 5360 5962 6764 7967 9972 4018 4134 4599 4715 4832 5180 5296 5761 6110 6342 6923 7098 7679 7795 8666 9828 11571 14476 Screen size (Diagonal) Projection distance Screen Width Height : Image size = Screen sizeWidth Height : Image size = Screen size Width Height : Image size : Screen sizeWidth Height : Image size : Screen size 714@6@@&/( .
15 ENGLISH ❖ 16 : 9 Screen In case of displaying the 16:9 picture on the whole of the 16:9 screen.❖ 4 : 3 Screen In case of displaying the 16:9 picture on the whole of the 4:3 screen. VP-12S1 Screen Size and Projection Distance (inch) VP-11S2L Diagonal Width Height Minimum Maximum inch inch inch inch inch 52 5/16 61 62 12/16 69 12/16 71 8/16 73 3/16 78 7/16 80 3/16 87 3/16 92 6/16 95 14/16 104 9/16 107 3/16 115 15/16 117 11/16 130 12/16 148 3/16 174 5/16 217 14/16 261 8/1629 7/16 34 5/16 35 5/16 39 4/16 40 3/16 41 3/16 44 2/16 45 2/16 49 51 15/16 53 15/16 58 13/16 60 5/16 65 3/16 66 3/16 73 9/16 83 6/16 98 1/16 122 9/16 147 1/16- - - 147 3/16 150 15/16 154 10/16 165 14/16 169 10/16 184 10/16 195 13/16 203 5/16 222 227 10/16 246 6/16 250 2/16 278 3/16 315 10/16 371 12/16 465 5/16 558 14/16- - - 222 3/16 227 13/16 233 7/16 250 5/16 255 15/16 278 6/16 295 4/16 306 8/16 334 9/16 343 371 1/16 376 11/16 418 14/16 475 559 5/16 699 12/16 840 4/16 60 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 300 To calculate the installation measurement (unit : inch) Minimum = 2 13/16 x Screen Size - 2 9/16 Maximum= 1 14/16 x Screen Size - 2 9/16 N ote : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. 16:9 Screen Size (1.77:1 Aspect Ratio) Projection Distance Screen size (Diagonal) Projection distance Screen Screen Diagonal Width Height Minimum Maximum inch inch inch inch inch 60 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 30048 56 57 10/16 64 65 10/16 67 3/16 72 73 10/16 80 84 13/16 88 96 98 6/16 106 6/16 108 120 136 160 200 24036 42 43 3/16 48 49 3/16 50 6/16 54 55 3/16 60 63 10/16 66 72 73 13/16 79 13/16 81 90 102 120 150 180- 157 11/16 162 4/16 180 9/16 185 3/16 189 12/16 203 8/16 208 1/16 226 6/16 240 2/16 249 4/16 272 2/16 279 301 14/16 306 8/16 340 13/16 386 10/16 455 4/16 569 12/16 684 3/16203 13/16 238 4/16 245 2/16 272 10/16 279 8/16 286 6/16 307 313 15/16 341 7/16 362 1/16 375 13/16 410 3/16 420 9/16 454 15/16 461 13/16 513 6/16 582 3/16 685 6/16 857 6/16 1029 6/16 To calculate the installation measurement (unit : inch) Minimum = 3 7/16 x Screen Size - 2 9/16 Maximum= 2 5/16 x Screen Size - 2 9/16 N ote : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. 4:3 Screen Size (1.33:1 Aspect Ratio) Projection Distance ❖ 16 : 9 Screen In case of displaying the 16:9 picture on the whole of the 16:9 screen.❖ 4 : 3 Screen In case of displaying the 16:9 picture on the whole of the 4:3 screen. VP-12S1 Screen Size and Projection Distance (mm) VP-11S2L Diagonal Width Height Minimum Maximum inch mm mm mm mm 60 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 300 To calculate the installation measurement (unit : mm) Minimum = 71.3 x Screen Size - 64.4 Maximum= 47.5 x Screen Size - 64.8 N ote : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. 16:9 Screen Size (1.77:1 Aspect Ratio) Projection Distance 1328 1550 1594 1771 1815 1860 1992 2037 2214 2347 2435 2657 2723 2944 2989 3321 3763 4428 5535 6641747 872 897 996 1021 1046 1121 1146 1245 1320 1370 1494 1532 1656 1681 1868 2117 2491 3113 3736- - - 3735 3830 3925 4210 4305 4685 4970 5160 5635 5778 6253 6348 7060 8010 9435 11810 14185- - - 5640 5782 5925 6353 6495 7066 7493 7779 8492 8706 9419 9561 10631 12057 14196 17761 21326 Diagonal Width Height Minimum Maximum inch mm mm mm mm 60 70 72 80 82 84 90 92 100 106 110 120 123 133 135 150 170 200 250 300 To calculate the installation measurement (unit : mm) Minimum = 87.3 x Screen Size - 64.4 Maximum= 58.1 x Screen Size - 64.8 N ote : When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. 4:3 Screen Size (1.33:1 Aspect Ratio) Projection Distance 1219 1422 1463 1626 1666 1707 1829 1869 2032 2154 2235 2438 2499 2703 2743 3048 3454 4064 5080 6096914 1067 1097 1219 1250 1280 1372 1402 1524 1615 1676 1829 1875 2027 2057 2286 2591 3048 3810 4572- 4002 4118 4583 4699 4816 5164 5280 5745 6094 6326 6907 7082 7663 7779 8650 9812 11555 14460 173655174 6047 6221 6920 7094 7269 7793 7967 8666 9189 9539 10412 10674 11547 11721 13031 14777 17396 21761 26126 Screen size (Diagonal) Projection distance Width Height : Image size = Screen sizeWidth Height : Image size = Screen size Width Height : Image size : Screen sizeWidth Height : Image size : Screen size 714@6@@&/( .
16 ENGLISH Screen PositionScreen Position 0% (Center) 0% (Center) (+100%) -85% Screen Height = 1H0.3H Up More 0.5H Up 0.4H Down+165% +100% Focus pattern color: White Focus pattern color: Green VP-11S2 VP-11S2 ❖ Standard condition (From -85% to +100%) ❖ Extended mounting condition (From +100% to +165%) Lens shift position VP-11S2 CAUTION: In the expanded mounting condition (green focus pattern), the corners of the picture may appear dark or distorted. 714@6@@&/( .
17 ENGLISH Screen Height = 1H +165% -85% Focus pattern color: White 0.8 H Up 0.4H Down VP-11S2LScreen Positon 0% (Center) ❖ Standard condition (From -85% to +165%)Lens shift position VP-11S2L 714@6@@&/( .