Home
>
Makita
>
Radio
>
Makita Cordless or Electric Job Site Radio with iPod iPhone Docking Station User Manual
Makita Cordless or Electric Job Site Radio with iPod iPhone Docking Station User Manual
Here you can view all the pages of manual Makita Cordless or Electric Job Site Radio with iPod iPhone Docking Station User Manual. The Makita manuals for Radio are available online for free. You can easily download all the documents as PDF.
Page 1
GB Radio Instruction manual F Radio Manuel d’instructions E Radio Manual de instrucciones LXRM03
Page 5
5 ENGLISH (Original instructions) Explanation of general view Controls:1. iPod/iPhone docking 2. Power/Sleep timer 3. Source button 4. Radio alarm 5. Buzzer alarm 6. Preset stations/Playback buttons 7. Menu/Info button 8. Volume/Tuning control/Select knob 9. DC IN socket 10. AUX IN 1 11. LCD display 12. Handle 13. Soft bended rod antenna 14. Battery compartment locker 15. Speaker 16. Battery compartment (covering main battery pack and back up batteries) 17. Input terminal (AUX IN 2) 18. Battery...
Page 6
6 iPhone, iPod, iPod classic, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of...
Page 7
7 • If you can see the red indicator on the upper side of the button, it is not locked completely. Install it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. • To remove the battery cartridge, withdraw it from the tool while sliding the button on the front of the cartridge...
Page 8
8 Presetting stations in AM/FM mode There are 5 preset stations each for AM and FM radio. They are used in the same way for each waveband. 1.Press the Power button to switch on your radio. 2.Press the Source button to select the desired waveband. Tune to the required radio station as previously described. 3.Press and hold the required Preset button (1 to 5) until the display shows “P4” for example after the frequency. The station will be stored using the preset number. Repeat this procedure...
Page 9
9 controls. The radio controls can be used for Menu/Select, Previous/Next, Fast Rewind/Fast Forward and Play/ Pause functions. 1.Use the Menu/Info button to navigate to higher level menus on your iPod/iPhone. 2.Rotate the Tuning control as required to move up or down a menu screen on your iPod/iPhone. 3.Press the Tuning control to select the highlighted option on your screen menu. Note: If this item is a lower level menu item, you may then navigate further by pressing the Tuning control....
Page 10
10 2.Rotate the Tuning control until “RDS CT” and a clock symbol appear on the display. Press the Tuning control to enter the setting. 3.Rotate the Tuning control until “RDS CT” appears on the display. Press the Tuning control to confirm the setting. The clock time of the radio will set up automatically according to the RDS data received. 4.When the action is completed, the RDS icon will appear on the LCD display indicating the radio time is RDS clock time. The radio cock time will be valid...