Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 71

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Adjunct Power
4-9 The 1151A1 and 1151A2 Power Units
4
type of input voltage. When AC power fails, the battery will provide 15 minutes of
holdover at full load (20 watts) or 8 hours at light load (2 watts).
The 1151A1 and 1151A2 power supplies can be used to supply local power to
ISDN-T 65xx, 75xx, and 85xx series voice terminals connected to a DEFINITY
Communications...

Page 72

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Adjunct Power
4-10 The 1151A1 and 1151A2 Power Units
4
Connecting the Power Supply
The power output is provided through 1 modular jack on the power supply.
These jacks are labeled, from left to right:
The - and + numbers under “PHONE” refer to the pins on which power is present
and the polarity of that power.
The PHONE and LINE jacks are 8-pin female non-keyed 657-type...

Page 73

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Adjunct Power
4-11 The 1151A1 and 1151A2 Power Units
4
Figure 4-4. Local Powering Arrangement (Using the 1151A1/A2) for: ISDN-T Voice 
Terminals; the DCP 7444 and 8434/8434DX Voice Terminals (for their VF 
Displays); the 8411; any 8400 or 6400 Series Telephone with an Attached 
Expansion Module; and Adjuncts Connected to All Telephones Except the 
8102
Adjunct
Line...

Page 74

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Adjunct Power
4-12 The 1151A1 and 1151A2 Power Units
4 

Page 75

Administration
5-1
5
DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
5
Administration
This section contains some of the information necessary to administer the
different voice terminals connected to a DEFINITY Communications System
Generic 1, Generic 2, and Generic 3, a DEFINITY Enter prise Communications
Server (ECS), and to a System 75, or System 85. It also provides the caveats
required when administering some of...

Page 76

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Administration
5-2 Aliasing
5
Aliasing
When some of the newer voice terminals are used with some older versions of the
switches, the administration procedures of the switch does not allow for the use of
the new terminals. These new terminals must be administered using the
administration procedures of a similar older terminal. This is called “aliasing” a
set.
When...

Page 77

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Administration
5-3 Aliasing
5
S = Administered as Self
X = Not Allowed
DD = Digital Display Module
Table 5-1. DEFINITY G1 and G3, DEFINITY ECS, and System 75 Voice 
Terminal Administration
System
Voice Terminal  S75 R1V1 S75 R1V2 S75 R1V3 G1 and G3
8101/8102/8110 2500 with Message Waiting
6201 2500
6210/6220/6230 2500 with Message Waiting
6402, 6402D, 6408,
6408+,...

Page 78

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Administration
5-4 Aliasing
5
DD = Digital Display Module
Table 5-1.   DEFINITY G1 and G3, DEFINITY ECS, and System 75
Voice Terminal Administration — Continued
System
Voice Terminal S75 R1V1 S75 R1V2 S75 R1V3 G1 and G3
7410 7403D
7410 Plus 7403D 7410D
7434 7405D
7444 7405D
DD7405D
or 7407D
*
* CAVEATS for administration of the 7444 voice terminal:
If the 7444 voice...

Page 79

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Administration
5-5 Aliasing
5
S = Administered as Self
X = Not Allowed
+D = with Display Module
+F = with Feature Key Module
Table 5-1.   DEFINITY G1 and G3, DEFINITY ECS, and System 75
Voice Terminal Administration —Continued
System
Voice Terminal S75 R1V1 S75 R1V2 S75 R1V3 G1 and G3
8434/8434DX (for extra features)*
* CAVEATS for administration of the 8434 voice...

Page 80

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Administration
5-6 Aliasing
5
S = Administered as Self
X = Not Allowed
PC = Personal Computer
DD = Digital Display Module
DM = Data Module
TDM=TrunkDataModule
PDM = Processor Data Module
Table 5-2. DEFINITY G1 and G3, DEFINITY ECS, and System 75 Terminal
and Module Administration
System
PCs and
Digital Modules S75 R1V1 S75 R1V2 S75 R1V3 G1 and G3
PC/PBX Platform 7405D...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

All Lucent Technologies manuals