Lucent Technologies Definity Audix System Release 4.0 Guide

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-7  
3
Disc uss the system p assword  with the 
c ustomer. Customers can chang e the 
system p assword  for the 
cust login to 
whatever they want. Luc ent Tec hnolog ies 
c ontrols the p assword  for the 
craft and other 
log ins, so the RSC c an p erform remote 
maintenance.
Remove switc h 
translationsInstaller Remove any translations for c irc uit p ac ks to 
b e moved  to rec...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-8  
3
Prep are the site Customer Prep are eq uip ment room for installation. See 
DEFINITY AUDIX System — System 
Desc ription
, 585-300-214, for c omp lete 
information ab out environmental 
c onsid erations.
In ord er to install the DEFINITY AUDIX 
system, eac h station need s a uniq ue 
extension and  c aller ID. For examp le, the 
DEFINITY AUDIX system will reject the 
switc h d...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-9  
3
Verify customer 
op tions Installer The fac tory normally ac tivates the c ustomer 
op tions before ship ping. Use Worksheet C-1
 
to c hec k port activation, the switch and p ort 
c onnec tion typ es, the Dig ital Networking  
and  Multiling ual op tions, and  maximum 
numb er of I
NTUITY Messag e Manag er log in 
sessions. If nec essary, chang e the setting s 
for these...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-10  
3
For d etailed  instructions on testing  Alarm 
Orig ination, see 
DEFINITY AUDIX System 
Release 4.0
 — Installation and  Switc h 
Ad ministration
.
Test the DEFINITY 
AUDIX featuresInstaller Test the DEFINITY AUDIX features. For 
d etailed  instructions, see 
Installation and  
Switc h Ad ministration for the DEFINITY 
AUDIX System Release 4.0, 
585-300-122.
Perform initial...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-11  
3
Test any features you ad ministered  in this 
step .
Back up  the d ata you entered  using  the 
magneto-optical disk drive.
Administer Dig ital 
Networking Installer Test and  ad minister Dig ital Networking . See 
Appendix B
 for more information ab out 
Dig ital Networking .
Table 3-1. New System with Existing Switch  (Continued)
Task Party RequirementsDate 
Complete...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
New System Ordered for Existing Switch 
3-12  
3 

Switch Carrier Configuration Worksheets 
A-1  
A
Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
A
Switch Carrier Configuration 
Worksheets
To install a DEFINITY AUDIX system in a System 75 or DEFINITY switc h at a 
c ustomer site, the switc h must have two1 c ontig uous p ort slots availab le in a 
c arrier. If the switc h d oes not have two c ontiguous p ort slots availab le, the 
system will have to b e rearrang ed  or a new c arrier p urc hased . 
NOTE:
Verify that...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
Switch Carrier Configuration Worksheets 
A-2  
A
nFor System 75 XE, use AT& T Sy st e m  7 5  XE Sy st e m  D e sc ri p t io n, 
555-201-200, Issue 1 or later 
nFor DEFINITY Generic  1 or Generic  3, use D EFI N I TY® 
Communic ations System Generic  1 and  Generic  3 System 
Desc rip tion and  Sp ec ific ations
, 555-230-200, Issue 1 
nFor G3V2 or hig her, use DEFINITY Communic ations System 
Generic  3 System Desc rip...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
Switch Carrier Configuration Worksheets 
A-3  
A
Worksheet A-1: Port Slot Assignments
(Before Carrier Rearrangement)
Complete the following worksheet to ind ic ate how c irc uit p ac ks are c urrently 
arrang ed  in the switc h c arrier. 
On the worksheet, the slots are numb ered  as seen from the 
front of the carrier, 
with slot 1 on the far left and  slot 20 on the far rig ht. It is not nec essary to fill in the...

Planning for the DEFINITY AUDIX System Release 4.0  585-300-602  Issue 1
May 1999
Switch Carrier Configuration Worksheets 
A-4  
A
Worksheet A-2: Port Slot Assignments
(For Carrier Rearrangement)
Complete the following worksheet to ind ic ate how c irc uit p ac ks should  b e 
arrang ed  in the switc h c arrier b efore the DEFINITY AUDIX system is installed . On 
the worksheet, the slots are numb ered  as seen from the 
front of the c arrier, with 
slot 1 on the far left and  slot 20 on the far rig ht....