Loewe Individual 46 Compose 3d Operating Instructions

							81 -
english
 Wind
You can fast-forward/rewind videos to search for desired scenes.
Rewind at double speed.
Speed 2x, 5x, 10x, 20x.
Fast-forward at double speed.
Speed 2x, 5x, 10x, 20x.
PLAY button:  Continue playback.
➠  In the case of Internet videos, please wait until these 
are buffered in the memory. This can take a few 
seconds, depending on the bit rate of the film and 
internet speed.
  Jumping
You can jump to any point in the video by entering a time.
Yellow button: opens jump to …..
Enter the desired time with the numberic buttons.
 OK  jumps to the time entered.
Yellow button: cancels the jump. 
Select language/sound
Video files can contain several audio tracks.
Red button: selects language/sound.
   Highlight the desired sound or language and
 OK  selects the audio track.
END: Cancels audio track selection.
Media+
OKLANGUAGE/SOUND
130
129
128
131

09-
VIDEO PLAYER
Flower Exhibition
Playtime:     ??:??:?? (04:26)
Cancel jump
Enter time
 
						

							- 82
english
  HbbTV /  MediaText
 
HbbTV (1 (Hybrid broadcast broadband television) offers the user exten-
sive multimedia content, e.g. media libraries or additional information 
on the programme that is currently playing (if these are available from 
the current channel).
MediaText helps you to use the next generation of teletext/videotext 
for HbbTV. 
MediaText/HbbTV text can either be started directly or through an HbbTV 
application.
Open HbbTV application
If an HbbTV application is available for the chosen channel after changing 
channels, this will be loaded during the automatic start process (see page 
83) and a red button symbol will appear. When starting manually, the 
application will only be loaded by pressing the red button.
➠ HbbTV is offered by the selected channel.
➠ Connection to the Internet.
➠ HbbTV mode is set to on.
Red button: Load / display HbbTV application.
The appearance, key assignment and available functions 
of the HbbTV applications are dependent on the provider. 
Under certain circumstances, the recording and 
bookmarking functions of the applications may not be 
supported. 
Loewe takes no responsibility for the accessibility, 
functionality or content of HbbTV applications.Hide / close HbbTV
END: Hide / close HbbTV application.
Depending on the start behaviour set (see page 83), 
the HbbTV application will be hidden (automatically) or 
closed (manually). In the start behaviour automatically, 
you need to press the END button a second time for 
closure. You will see a screen message after closing.
Open HbbTV text directly
➠  MediaText/HbbTV text is offered by the selected channel.
TEXT: Open HbbTV text.
Pressing the TEXT button again opens the “standard” 
teletext/videotext (see page 52).
Navigation within the HbbTV text and how the coloured 
buttons are assigned can vary depending on the provider.
 Leaving HbbTV mode/standard teletext
TEXT:  Pressing the TEXT button again ends teletext.
Media+
(1  Depending on the settings selected.
 
						

							83 -
english
HbbTV mode on/off
When the HbbTV mode is active (factory setting), additional services and 
further information (e.g. also from the Internet) can be viewed if these 
are offered by the current station.
MENU: Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Miscellaneous,
 go to the menu line below.
 Select HbbTV mode,
 go to the menu line below.
 Set the changes.
➠  If the setting HbbTV mode Ø off has been selected, 
you can open the DR archive / video archive by press-
ing the red button. Start behaviour of HbbTV-stations
If the setting HbbTV mode Ø on has been selected (see left column), you 
can specify if a available HbbTV application should be loaded automati-
cally after the channel has been changed or if this should only occur 
manually after the red button has been pressed once. After loading the 
HbbTV application, an on screen instruction is displayed (depending on 
the channel that is being viewed).
MENU: Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Miscellaneous,
 go to the menu line below.
 Select Start behaviour of HbbTV-stations,
 OK open.
  Choose station.
Blue button:  Change whole list / Change items individu-
ally.
Red button:  Starts HbbTV on the selected channel Start 
automatically / Start all automatically.
Green button:
  
Starts HbbTV on the selected channel Start 
manually / Start all manually.
Media+
START BEHAVIOUR OF HBBTV STATIONS                   
Change whole list
   DV(UVWH
						

							- 84
english
  About the Digital Recorder system
You can record stations on the integrated hard disk of your TV set with the digital recorder of your Loewe TV set (DR+
).
The Digital Recorder can also process HDTV signals including the audio and auxiliary signals that they contain.
The various ways in which your Digital Recorder can be used are listed below.
Overview of functions
Digital Recorder functionLoewe TV sets 
with integrated hard disk 
(DR+
)
Archive recording on the integrated hard disk
z
Archive recording on the USB storage device (external hard disk) –
View other channels whilst the archive recording is taking place
z
Archive playback from DR+
z
Archive playback from USB storage devices (external hard disk)
z
Delay TV in live play mode (timeshift)
z
Subsequent archive recording
z
Delay TV when archive recording is running
z
View other channels with delay TV whilst the archive recording is taking place
z
Copy recorded programmes onto an external recorder
z
Copy recorded programmes from DR+
 onto a USB storage device
z
Copy recorded programmes from one USB storage device to another
z
Permit recorded programmes to be viewed on the network
z
View programmes that have been permitted to be viewed over the network
z
DR archive view with cover pictures
z
Highlight replay
z
Set/delete manual bookmarks
z
Hide parts of a recording
z
zavailable
– not available
Digital Recorder
 
						

							85 -
english
  TV viewing with time shift
In the case of devices with an integrated hard disk, the Digital Recorder 
records the TV programme you are currently watching in the background 
if DR continuous mode is switched on in the Digital Recorder menu 
(factory setting).
 ➠  Time-shifted operation is perhaps not possible or only to a limited 
extent for programmes of stations working with CI Plus encoding 
(see page 109).
• Time shift
  You can stop a TV programme at any time and continue playing it 
later with a time shift. The maximum time shift is up to 3 hours. The 
recording starts again from the beginning and the old content is 
deleted every time you switch stations.
•  Fast navigation by jumping
  You can wind and rewind during a film at just the press of a button. 
The jump distance is adjustable. 
 The Smart Jump function also ensures that the jump width is halved 
each time the jump direction is changed or doubled after three jumps 
in the same direction (max. 8 minutes). This way you can quickly find 
a certain spot of the recording.
•  Fast forward and rewind
 You can fast forward and rewind at three different speeds in the 
programme you are viewing with time shift.
• Slow motion
 You can play a programme which you are watching with a time offset 
at four different slow motion speeds.
•  Subsequent archive recording
 When viewing a time-shift TV programme, you can archive the whole 
programme to the digital recorder’s archive.
• Setting bookmarks
  During a football match, for example, you can flag goals or exciting 
scenes. For this, the time shift recording is converted into an archive 
recording. At a later viewing you can replay bookmarked sections of 
a film as highlights. 30 seconds before and after the set bookmark 
are played.
• Replay function
 When, for example, you are watching live football, you can, at the 
touch of a button, rewind by 40 seconds and replay a scene. You 
see the live picture at the same time in a PIP picture (not for HDTV 
broadcasts).
Digital Recorder archive
You can record movies you want to watch later in the Digital Recorder‘s 
archive. 
➠  Recordings of CI Plus encoded programmes are perhaps not possible 
or only to a limited extent (see page 109).
If EPG or teletext data are available, the Digital Recorder stores the title 
and additional information about each programme in the archive.
If additional languages are being transmitted for a DVB broadcast, these 
are also recorded. DVB subtitles or teletext subtitles are recorded if the 
recording of subtitles has been activated in the Digital Recorder settings. 
Display language selection and subtitles as in TV mode.
Start playback of your recordings from the archive.
If bookmarks were set in a recording, these entries are marked accord-
ingly (). You can start playback so that the bookmarks are played as 
highlights (see page 102). 
Comfortably select your favourite programme for recording from the EPG 
or teletext and watch the programmes later from the Digital Recorder’s 
archive. 
An automatic Delete Manager always ensures there is sufficient recording 
space for new movies (see page 96).
• Sort titles
 You can have the broadcasts displayed according to time, alphabeti-
cally or by station name. You can therefore quickly find the recording 
you want to watch.
• Rename/edit titles
 You can change the title of a programme in the archive, if necessary.
• Parental lock
 Protect your archive against unauthorised access by using the parental 
lock feature.
• Delete protection
 Set the delete protection for a movie to prevent it from being deleted 
automatically by the Delete Manager (see page 96).
• Copy
 Using time control, copy films from the archive of the digital recorder 
to the external DVD recorder or onto external hard disks.
Digital Recorder
 
						

							- 86
english
Archive recording 
➠  To record encoded programmes, please also read the instructions on 
pages 108 and 109.
You can playback a recorded programme from the archive at the same time 
as recording a TV programme into the archive. You can also play the same 
programme you are currently recording with a time shift.
• Immediate recording
  Record interesting programmes directly into the DR archive with the 
RECORD button. When viewing time-shift broadcasts (see page 85) 
the current broadcast can be saved to the DR archive. The programme 
is recorded from the beginning to the end of the time offset recording 
or to the end of the set recording time.
• Timer-controlled recording
 Comfortably select your favourite programme for recording, from the 
EPG or teletext. The timer overview has room for 50 entries. Watch the 
programmes later from the Digital Recorder‘s archive.
• Serial recording
  You can conveniently programme series broadcast with alternating start 
times.
  In some broadcast networks (like UK FreeView) you can even let the TV 
set record series and split events automatically depending on the infor-
mation provided by the broadcaster. A conflict manager (see page 14) 
will also automatically try to find alternate instances of conflicting 
recordings if signalled by the broadcaster (e.g. UK FreePlay).
•  Time shift viewing with archive recording
 If you have programmed recording and come home before it is finished, 
you can watch the movie with a time shift while the rest is still being 
recorded. 
Archive playback
All the recorded programmes can be selected in the archive and played. 
During archive playback, another programme can be recorded into the 
archive.
•  Fast forward and rewind
  There are three different speeds for winding and rewinding films.
•  Fast navigation by jumping
  You can fast forward and rewind during a film at the touch of a button.  
The jump width is adjustable (see page 87).
 The Smart Jump function also ensures that the jump width is halved 
each time the jump direction is changed or doubled after three jumps 
in the same direction (max. 8 minutes). This way you can quickly find 
a certain spot of the recording.• Slow motion
  You can use playback at four different slow motion speeds.
• Bookmarks
 To find interesting scenes in a movie later, you can manually set the 
bookmarks. In addition, there are also automatically set bookmarks every 
time a broadcast is changed. You can jump to each of the bookmarks in 
succession at the press of a button. 
• Playing highlights 
 For recordings with manually set bookmarks you can limit the playback 
only to the highlights. You then see the scenes 30 seconds before 
and after each set bookmark. If there is more than one bookmark the 
highlights are played one after the other.
• Cut/Hide functions
 Unwanted sections at the beginning and ending of a recording are easy to 
delete. Set hiding marks around uninteresting sections to watch a movie 
without interruptions or to archive it on DVD.
• Copying your recordings
  You should burn recordings that you want to save permanently on 
DVD or copy them on an external USB hard disk. Afterwards, you can 
delete the recording from the archive.
 ➠  Copying recordings, which originate from a CI Plus encoded station, 
is perhaps not possible or only to a limited extent (see page 109).
Technical information
Switching off the TV set with the mains switch during operation or an 
inadvertent disruption to the power supply (e.g. power failure) can cause 
damage to the hard disk file system and hence loss of the recorded 
broadcasts. Always first switch your TV set to standby mode (press On/
Off button on the remote control or switch-off button in the middle 
of the operating eye on the TV set), before switching off at the mains 
switch. Do not disconnect the USB storage device from the TV set under 
any circumstances whilst it is being copied onto.
However, if unexpected problems occur when operating the hard disk, 
formatting the hard disk may rectify this. Refer to the instructions on 
page 107. Also follow the information for formatting on page 107 
when using an external USB disk
Digital Recorder
 
						

							87 -
english
  Settings
You can make a few settings in the Digital Recorder menu to adapt the 
Digital Recorder to your requirements.
Call Digital Recorder menu
Call DR archive.
MENU:  Call Digital Recorder menu.
 Choose a setting,
 switch to the menu line below.
 Set or enter using the
  numeric buttons of the remote control.
Explanation of the setting facilities
Select the storage medium whose accessible content is 
to be displayed in the DR archive.
➠  The menu item only appears if several storage devices 
are available (for external hard disks and TV devices 
that are capable of permitting DR archive programmes 
to be viewed on the network, see page 105 onwards).
If DR continuous mode is switched on, the programme 
being watched is recorded permanently in the back-
ground.
Factory setting: on.
Adjust the  recording quality for recording analogue pro-
grammes. This results in a change in the  recording capacity. 
Factory setting: high.Explanation of the setting facilities (continue)
Display DR archive entries with or without covers.
For determining covers, see page 104.
Factory setting: With cover pictures.
➠  If you watch the broadcast during recording (e.g. for di-
rect recording), a cover will automatically be adopted. 
A broadcast whose recording is running completely 
in the background is initially saved without a cover.
If an entry has been hidden in an archive recording (see 
page 99), you can be informed by a screen message 
when skipping a hidden area.
Factory setting: yes.
Set the standard jump width (in minutes) used for jumping 
forwards or backwards in the film by pressing  or . 
Use the numeric buttons on the remote control to enter 
the time (always two-digit for 01 to 15 min.).
Factory setting: 04 min.
➠  If Smart Jump is activated, the jump width can only be 
set between 1 and 4 minutes.
Activate or deactivate Smart Jump function (see page 89).
Factory setting: yes.
A broadcast programmed with the recording type Serial 
is recorded only if it begins within the programmed start 
time ± series recording tolerance. Use the numeric buttons 
on the remote control to enter the time (always two-digit 
for 01 to 60 min).
Factory setting: +-30 min.
➠  Serial recording tolerance is ignored when recording a 
programme with auto time control (see page 95).
Select here whether subtitles are to be recorded in 
continuous operation for DVB stations.
Factory setting: no
 (1 .
The TV set can possibly already record decoded pro-
grammes in DR-continuous operation that have been 
watched as time-shifted encoded programmes. Recording 
the programme directly into the DR archive saves you 
having to descramble it later.
Factory setting: no
 (2.
See page 88.
(1 for location of TV set DK, FIN, N or S: yes.(2 for location of TV set NL: yes.
 
Select memory 
medium
   
DR continuous 
operation
  Recording 
quality   
DR archive
 view
  Inform about 
hidden 
sections
   
Jump distance
  Smart Jump
  Serial
recording
tolerance
   
Record
subtitles at DR 
continous
operation
  Descrambling at 
DR continuous 
operation
DR+ Streaming 
settings
TEXTOK
 
 
 é
 
 
  
 
 - 
  Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00  
  DR ARCHIVE                free capacity 68:42 hrs
Edit/protect
Delete/copy
Change sorting Detail View
Timer list
DR continuous operation     Recording qualiDIGITAL RECORDER MENU
Select memory medium
Integrated hard disk        
  
 ...
Digital Recorder
 
						

							- 88
english
Setting the  pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made 
without VPS (analogue) or auto time control (DVB) (see also page 108). 
This minimizes the risk that a part of the broadcast is not recorded due 
to the broadcast starting earlier and/or finishing later.
MENU: Call TV menu.
 Choose Recording, switch to the menu line below. 
 Set pre-record or post-record time,
 switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit: 
01 to 15 mins for pre-record time; 01 to 60 mins for 
post-record time). Factory setting: pre-record: 00 min, 
post-record: 05 min.   DR+ Streaming settings
Enter here whether recorded broadcasts within your TV 
set’s DR archive are to be accessible for viewing from 
other TV sets (server function).
Setting yes enables you, via the DR archive, to also view 
recordings from other TV sets that have accessible films 
within the home network (client function).
Give your TV set a unique name for quick identiÆ cation 
in DR+
 Streaming.
Give a name for your TV set group.
Using different group names enables you to group your 
TV sets as required. Only TV sets under the same group 
name can exchange data.
IP port numbers are preset ex-factory. Under normal 
circumstances they do not require amending.
Set here how long your TV set is to continue to give access 
to Æ lms after calling DR+ Streaming within the MediaPor-
tal (refer also to the operating instructions of the TV set).
This stand-by period is also activated as soon as data 
exchange to another TV set has been completed.
Post-record time      Recording wizard list PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here 
specifying how long before the scheduled time your programmed recording 
should start so that programmes which begin too early are recorded 
in full.
TV MENU
Recording
Pre-record time
00 min (0 - 15)
DR+ STREAMING SETTINGS
Share the DR archive with other TVs      yes
Using the DR archives of other TVs        yes
DR device name            LOEWE TV
DR device group name         Home
IP port number            17123
DR standby              2 hrsno
   
Share the DR 
archive with 
other TVs
   
Using the DR 
archives of 
other TVs
  DR device 
name
  DR device 
group name
  IP port
number
  DR standby
Digital Recorder
 
						

							89 -
english
  TV viewing with time shift
The Digital Recorder continuous operation is switched on as the factory 
default setting (see page 87). In this case, the TV broadcast that you 
wish to view is automatically recorded in the background. The maximum 
time shift is up to 3 hours.
➠  
Please also read the instructions on watching time-shifted television 
on page 85.
➠ Programmes with copy protection (e.g. Macrovision) cannot be 
watched with a time shift for legal reasons.
 Interrupt 
Press PAUSE button.
The TV image becomes a freeze frame and the DR status 
display appears.
At the top you will see the number and name of the 
station if EPG or teletext data are available, in addition 
to the start and end of the current programme and the 
title of the programme.
On the left hand side of the bar you can see the start time 
for time shift recording. On the right hand side of the bar 
you can see the time at which the time shift recorder will 
be full (automatically extends by 30 minutes, up to a max. 
3 hours). The bar shows the amount of available record-
ing capacity already used. The time displayed inside the 
bar is the time at which the Pause button was pressed.
 Continue ( time shift viewing)
Press PLAY button.
You can now watch the TV programme with a time shift 
from the time you pressed the PAUSE button. The Playback 
symbolappears in place of the Pause symbol. 
 Jump to automatically set bookmarks
With time-shift television, and with the status display showing, you can 
skip to automatically set bookmarks or to the start or end of the cur-
rent recording. White bookmarks mark the beginnings and endings of 
broadcasts.
Red button: Jump back
Blue button: Jump forwards  Switch to live picture
Press STOP button.
You see the station’s live picture again.
  Jumping
You can jump during time shift viewing by briefly pressing the buttons 
  in the jump distance set; this enables you to skip uninteresting 
sections quickly. 
 Jump forwards.
 Jump backwards.
  Smart  Jump
If Smart Jump is activated, the jump width is halved every time you change 
the jump direction. The jump width is doubled if you jump more than 
three times in the same direction (max. 8 min.).
:  Jump width corresponds to the jump width preset 
in the Digital Recorder menu.
:  Jump width is less than preset in the Digital Recorder 
menu (e.g. after changing the jump direction).
:  Jump width is greater than preset in the Digital 
Recorder menu (e.g. after jumping three times in the 
same direction).
For example, you are searching for the beginning of a broadcast that 
has already started.
Press repeatedly to jump back.
If you have jumped past the beginning of the programme, 
jump in the opposite direction: 
  This jump in the opposite direction is only carried out 
for half the jump distance. Jump forward using .
If you have jumped past the start of the programme: 
 Jump back again. In the process, the jump distance 
is cut in half again. 
By halving the jump distance when changing direction 
again you can find your way to a specific place.
09:56 09:4510:00Follow me
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
DR archive Language/sound
09:56 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
%RRNPDUN
						

							- 90
english
  Fast forward and rewind
During time shift viewing you can fast forward and rewind at three dif-
ferent speeds. Sound is not audible during winding.
Press  or  for a little longer.
By briefly pressing  or , the speed will increase until 
you switch back to the first speed.
Playback begins automatically upon reaching the end of 
the recording. You are then about 10 seconds behind the 
live picture or when rewinding at the beginning of the 
time shift recording. 
 Slow  motion
If Pause is active (freeze picture) you can play at four slow-motion speeds. 
Sound is not audible during slow motion. When viewing HDTV slow mo-
tion backwards is not possible.
Press PAUSE button.
Press  or  briefly.
Increase speed:
Press  or  several times briefly. 
The speed increases every time you press the button until 
eventually switching back to the initial speed.  Highlight  function 
You can mark interesting scenes in sports reports for example to watch 
these again specially at a later viewing.
You can set bookmarks in time-shift TV or during live viewing.
Press PLAY button for a little longer: Set bookmark.
The time shift recording that is already active in the back-
ground is converted into an archive recording. You will see 
a message on the screen. Every time the PLAY button is 
pressed down again a little longer, a new bookmark is set.
➠  
If there is no teletext or EPG programme information, 
the Recording duration menu will appear the first time 
you press the PLAY button. Select the desired record-
ing duration and confirm using OK (see page 91).
Recordings which contain manual bookmarks can be 
replayed as highlights (see chapter Archive playback on 
pages 98 and 102).
 Replay  function
You can watch interesting scenes of sports reports again for example 
(only in live picture).
Press button .
The set jumps back 40 seconds into time shift mode. The 
playback flag is yellow (Smart Jump active).
At the same time, the live image is shown as a PIP small 
picture (not with HD stations).
Button : Skip forwards 20 seconds.
PIP button:   Close PIP picture, without quitting the 
time-shift playback.
STOP button:  
End replay function and return to live 
picture. 
Switch to a different station
The time offset recording is restarted when you change stations. The 
previous time offset recording is deleted.
09:52 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
Language/sound
09:55 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
Language/sound
09:57 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
Language/sound
09:49 09:4510:00Follow me
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
DR archive Language/sound
09:49 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
Language/sound
09:52 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
Language/sound
09:55 09:4510:00
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
%RRNPDUN