Loewe Individual 46 Compose 3d Operating Instructions

							101 -
english
Copy recordings onto an external hard disk
You can also copy programmes onto a external hard disk, and archive 
them or make them available to other Loewe LCD TV sets (even those 
without DR+
).
Call DR archive.
Select titles that you want to transfer as described on 
page 100.
Blue button: Call Copy entry.
 Select USBx in the Copy menu.
 OK Start copying.
➠  
Copying to an external hard disk takes place in the background and 
at a significantly higher speed. Contrary to copying recordings to a 
connected recorder (see page 100), there are no selection restrictions 
here regarding the stations. You see a screen message, when copying 
has finished.
  The status of copying assignments in progress can be seen in the timer 
overview.
➠  The TV set must not be switched off with the mains switch during the 
copying!
 Delete programmed descrambling
You can delete a programmed descrambling of scrambled recordings 
at any time.
➠ DR archive is displayed.

Mark the desired programme (red dot with key 
symbol).
Yellow button: Call Delete/descramble.
Blue button: Cancel descrambling.
The red dot with key symbol and the entry in the timer 
list are deleted.  Descramble  scrambled  recording 
You can start descrambling scrambled recordings manually at any time (1. 
The CA module with the smart card must be inserted at the time of de-
scrambling. Descrambling should be done as soon as possible because 
the probability that the code may become invalid increases with the time 
between recording and descrambling.
Proceed similarly to copying from the archive:
➠ DR archive is displayed.
Mark recording to be descrambled.
➠  Scrambled recordings are marked by é in front of the bar.
Yellow button: Call Delete/copy.
Blue button: Call Descramble entry.

Select Integrated hard disk
    Determine date and time of the descrambling.
 OK Confirm.
   You see the DR archive again. You will see a red dot  
with key symbol for the programmed descrambling 
in front of the date.
➠ No other DVB station can be watched during descrambling. But the 
TV set can be switched off to standby mode. It is best to descramble 
at night when the TV is not in use.
➠ You will find the recording descrambled in the DR archive after suc-
cessful descrambling (without a é before the bar).
➠ The time and date of the descrambling can be changed subsequently 
in the timer list (see page 93).
(1  Please also read the instructions on pages 108 and 109 concerning the han-
dling of encoded programmes.
OK
OK
DR ARCHIVE
Copy
14.09.  Phoenix    Bon(n) jour Berlin
 confirm
Copy to ...      USB1AV
OK
OK
DR ARCHIVE
Descramble
15.09.  Sky Cinema HD    Top-Movie 1
 confirm
Store at ...      Integrated hard disk
Date         16.09.2009
Time        03:00-05:15 (135
 min)
Digital Recorder
 
						

							- 102
english
  Viewing highlights from the archive
Call DR archive.
 
Highlight recording with manually set bookmarks.
➠  Recordings with manually set bookmarks are high-
lighted with .
PLAY button: View Highlights.
    The highlights are played in sequence.
 Deleting recordings from the archive
➠ DR archive is displayed.
  Flag the recording to be deleted.
Yellow button: Call Delete/copy.
 Select others if necessary and
 OK confirm.
Red button: Mark all entries.
➠ Titles to be deleted are displayed in blue.Yellow button: Call Delete entry.
 OK ConÆ rm delete.
    The recording(s) is/are deleted.
The DR archive is displayed again.
  Delete   bookmarks
➠ DR archive is displayed.
 
Select the recording for which you want to delete 
the bookmarks. 
➠  Recordings with manually set bookmarks are 
flagged with  in front of the bar.
Yellow button: Call delete/copy.
 Select others if necessary and
 OK confirm.
Or:
Red button: Mark all entries.
➠ The selected titles are displayed in blue.
Green button: Delete bookmark.
All manually set bookmarks from the marked entries are 
deleted. Automatically set bookmarks are not deleted.
TEXTOK
 
 
 é
 
 
 = 
 
 {- 
  Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00  
  DR ARCHIVE               free capacity 68:42 hrs
Edit/protect
Delete/copy
Change sorting Detail View
Highlights
Timer list
TEXTOK
 
 
 é
 
 
 = 
 
 - 
   
  DR ARCHIVE               free capacity 68:42 hrs
Delete/copy
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Delete entry
Copy entry Detail Unmark
Mark all entries
Delete bookmark
TEXTOK
 
 
 é
 
 
 = 
 
 - 
   
  DR ARCHIVE               free capacity 68:42 hrs
Delete/copy
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Delete entry
Copy entry Detail Unmark
Mark all entries
Delete bookmark
Digital Recorder
 
						

							103 -
english
 Changing the title of an archive
➠ DR archive is displayed.
Select the title to be changed.
Green button: Call Edit/protect.
Press the blue button for Rename.
Underneath the first letter of the title, you will see a line 
which indicates the current input position for the letter. 
Input position to the right.
Input position to the left.
In put the characters one after another (if entering using 
the number buttons on the remote control, use it as if it 
were a telephone keypad; see page 131 for the exact 
assignment of the buttons). 
Yellow button:  Delete character to the left of the cursor.
Green button:  Switch between capital letters and small 
letters.
 OK Conclude the entry. 
    This saves the change permanently.  Locking/unlocking a movie ( Parental lock)
You can lock movies that your children are not permitted to view, for 
instance. Viewing is then only possible if the PIN number has been en-
tered beforehand. 
➠ DR archive is displayed.
Green button: Call Edit/protect.
Mark the title that is to be locked.
Green button: Call Parental lock.
Enter your access code with the numeric buttons of the re-
mote control. If you define an access code for the first time, 
remember it well. Confirm the new access code with OK.
The DR archive opens again.
Green button: Lock movie.
  Select others if necessary.
Green button:  Lock movie or Unlock movie again.
A lock symbol î will be displayed before the bar in the 
case of locked films.
TEXT
 
 
 é
 
 
 = 
 
 - 
   
  DR ARCHIVE                free capacity 68:42 hrs
Edit/protect
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Parental lock
Set delete protection
Rename Detail
TEXT
 
 
 é
 
 
 = 
 
 - 
   
  DR ARCHIVE                free capacity 68:42 hrs
Edit/protect
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Parental lock
Set delete protection
Rename Detail
TEXT
 
 
 é
 
 
 =î 
 
 - 
   
  DR ARCHIVE               free capacity 68:42 hrs
Edit/protect
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Unlock movie
Set delete protection
Rename Detail
Access code PARENTAL LOCK
Please enter PIN****09-
Digital Recorder
 
						

							- 104
english
 Viewing a locked movie
Call DR archive.

Mark locked film,
 OK View film.
➠  The covers of locked films cannot be read. The detailed 
information for the recording cannot be called up. The 
cover (for archive view with covers, see page 87) is 
replaced by a neutral image with a key symbol. In 
addition, the entry receives the symbol î at the end 
of the line.
The system requests you to enter your access code (PIN). 
After entering the access code the playback of the movie 
starts.
 Determine cover picture
You can display cover pictures for your recorded broadcasts in the DR 
archive (see page 87). The covers can be freely determined by you 
during an archive replay:
Jump / wind to the desired location in the recording.
PAUSE button: Switch to freeze picture.
Blue button:  Adopt displayed freeze frame as cover picture.
The image will be displayed next to the broadcast in the 
DR archive in future (see also page 97).
PLAY button: Continue playback.  Setting/cancelling  delete  protection
You can provide films with a delete protection to prevent an automatic 
deletion by the delete manager (see page 96).
➠ DR archive is displayed.
Green button: Call Edit/protect.
  Select the title for which you want to set/cancel a 
delete protection.
Yellow button: Set/Cancel delete protection.
  Select others if necessary.
Yellow button: Set/Cancel delete protection.
The symbol ï appears in front of the bar when the delete 
protection is activated.
OKTEXT
 
 
 é
 
 
 =î 
 
 - 
   
  DR ARCHIVE                free capacity 68:42 hrs
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenix** ****31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
The parental lock is active.
Parental lock
delete/copy
Change sortingDetail View
Highlights
Timer list
TEXT
 
 
 é
 
 
 ï= 
 
 - 
   
  DR ARCHIVE               free capacity 68:42 hrs
Edit/protect
Top-Movie 1
15.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00
Parental lock
Cancel delete protection
Rename Detail
00:11 00:0000:15
$UFKLYH6WHUHR
da capo
DR archive Delete/hide Adopt as cover picture
Digital Recorder
 
						

							105 -
english
   
DR+ Streaming
You can make your DR archive entries accessible so that other Loewe 
TV sets can view them via the network. It is also possible to interrupt a 
current broadcast and “take it” to another TV set (Follow me function, 
see page 106). 
➠  
To use DR+
 Streaming, at least two Loewe TV sets are required with SL 
1xx chassis (at least one of which has an integrated Digital Recorder). 
The TV sets also need to be connected via a wireless connection 
(WLAN) or a cable connection (e.g. Ethernet, PowerLine).
➠   
DR+
 Streaming must be activated in the DR+ Streaming settings (see 
below). 
➠  Archive entries can only be hosted or permitted to be viewed by TV 
sets with an integrated hard disk (DR+
). Playback of archive entries 
that have been permitted to be viewed can take place on all TV sets 
with Chassis SL1xx (with or without DR+
) on the network.
➠  
The following functions would require write access on the device 
that is permitting the programme to be viewed, and are therefore 
not available when viewing a DR archive entry over the network (see 
right column): child protection, delete protection, rename function, 
delete entry or bookmark, set bookmark, partial delete or hide of the 
recording.
DR+ Streaming settings
Prior to the first use of DR+
 Streaming, a number of settings are required.
➠ Digital Recorder menu is open (page 87).
 Select DR+ Streaming settings,
 OKopen settings options.
For explanations of the settings see page 88. Play DR archive entry  via network
Call DR archive.

Select required TV set..
The name of the accessible TV set is shown in the second 
line (in this example: LOEWE TV).
 Mark the required archive entry,
 OK view archive entry.
See page 97 for further information.
   Extended standby mode with DR+ Streaming access
Switching off the accessible TV set ends access to the DR archive. You 
can, however, place your TV set in an extended standby mode to enable 
access to the DR archive even when the TV set is switched off.
MEDIA: Open MediaPortal.
   Select DR+ Streaming,
 OK call.
You will see a message on the screen. After approximately 20 seconds 
the TV set will enter extended standby mode. The DR archive will then 
be accessible within the network for the period of time set in the DR+ 
Streaming settings (see page 88).
TEXTOK
 
 
{,-=
     , - 
  UEFA Champions League - Qualifikation
20.08.   Sat.1Tagesschau19.08.   Das Erste HDheute19.08.   ZDF HDTatort29.07.   3satIndividual00.00.   LOEWE.
09:45 - 10:00  
  DR ARCHIVE                free capacity 59:14 hrs
LOEWE TV 
Edit/protect
Delete/copy
Change sorting Detail View
Timer list
MEDIA PORTAL
BR
Klassik Radio Filmtrailer.com90elf - Dein
Fussball-Radio DELUXE
LOUNGE RADIO Focus TV ZDFFocus Online
TV
DR+ Streaming MediaHomeDVB radio Internet radio
RECOMMENDATIONS
MediaNetDR archive
Video podcasts
Digital Recorder
 
						

							- 106
english
 Copy recordings from an  accessible TV set
You can copy archive entries from an accessible TV set via a network to 
the integrated hard disk, or to a storage medium connected to the TV 
set’s USB.
At the target TV set:
Call DR archive.

Select required accessible TV set.
Select titles to be copied as described on page 100.
Blue button: Call Copy entry.

If there are multiple storage mediums available, 
select the one required.
 OK  Start the copy procedure.
➠  
Copying to the integrated or external hard disk takes place in the 
background and at a significantly higher speed. Contrary to copying 
recordings to a connected recorder (see page 100), there are no 
selection restrictions here regarding the stations. You see a screen 
message, when copying has finished.
  The status of copying assignments in progress can be seen in the timer 
overview.
➠  During copying, neither the accessible TV set nor the target TV set may 
be disconnected from the mains! Copying will otherwise be interrupted 
and the recording may then be unusable.   Follow me function
The Follow me function enables you to interrupt a current broadcast and 
to continue viewing at an alternative TV set from the point of interruption.
➠ DR continuous operation is activated (page 87).
➠  Share the DR archive with other TVs (see page 88) 
is activated.
➠  Using the DR archives of other TVs (see page 88) is 
activated at the target TV set.
Press PAUSE button.
The TV image becomes a freeze frame and the DR status 
display appears.
Yellow button: Activate Follow me.
You will see a message on the screen. An archive record-
ing starts in approximately 20 seconds. The broadcast 
is adopted into the DR archive. The set switches off 
automatically.
The recording TV set will make the broadcast available to the network 
from now. Open the DR archive of the TV set on which you wish to 
view the broadcast. The broadcast appears in orange during the current 
recording.
To play accessible broadcasts on other TV sets, see 
page 105.
For further information on general operation see page 97.
TEXTOK
 
 
 
 é   ,   -
  IFA 2010 - Highlights
16.09.   ZDF HD Top-Movie 115.09.   Sky Cinema HD Bon(n) jour Berlin14.09.   Phoenixda capo31.08.   Das ErsteTagesschau29.07.   3satIndividual00.00.   LOEWE.
   DR ARCHIVE                free capacity 68:28 hrs
INDIVIDUAL 55
Edit/protect
Delete/copy
Change sorting Detail View
Timer list
09:56 09:4510:00Follow me
3KRHQL[6WHUHR
09:45-10:00   Bon(n) jour Berlin
DR archive
Language/sound
OK
OK
DR ARCHIVE
Copy
14.09.  Phoenix    Bon(n) jour Berlin
 confirm
Copy to ...      Integrated hard diskUSB1
Digital Recorder
 
						

							107 -
english
  Checking the hard disk
You can check the integrated hard disk of the TV set, e.g. if problems 
with the Digital Recorder function occur.
Call TV menu.
 Select Settings,
 
switch to the menu line below.
 Select Miscellaneous,
 
switch to the menu line below.
 Select Check integrated hard disk,
 OKactivate.
Red button: Start check.
After the check, a message will appear on the screen 
showing the results of the check and tips on how to 
resolve any problems that are present, should there be 
any.
➠  After the check, the TV set must be re-started.
Or:
END: Cancel the operation.
 
 
Formatting the hard disk
If problems were detected when the hard disk was being tested (see left 
column), re-formatting may be able to remedy the problem.
Additionally, you can re-format the hard disk in order to quickly and easily 
delete all the data stored on it.
Attention!
Formatting of the hard disk deletes all the data saved on it!
Call TV menu.
 Select Settings,
 
switch to the menu line below.
 Select Miscellaneous,
 
switch to the menu line below.
  Select Format integrated hard disk or Format external 
hard disk,
 OKactivate.
Red button: Start formatting.
➠  After the formatting, the TV set must be re-started.
Or:
END: Cancel the operation.
Note on formatting external USB disks:
The TV set uses the hard disk file system FAT32. The file system NTFS is 
not supported. PCs with the operating system Microsoft Windows only 
support a total hard disk volume of 32GB when formatting on FAT32. 
Larger hard disks are automatically reduced in their capacity by this. 
Format external USB disks that you wish to use with the TV set as de-
scribed above.
ATTENTION
If the formatting of the hard disc is confirmed by pressing the   button 
then the TV switches itself off and then back on, and the formatting of the
herd disc starts automatically. Attention! This process will delete all data
stored on the hard disc.
Do you really want to format the hard disc?
Start formatting No, cancel the operation
Digital Recorder
ATTENTION
The hard disk check can be launched by pressing the confirmation key    
and can take up to 20 minutes?
Start check No, cancel the operation
 
						

							- 108
english
  Further information
  VPS  and   automatic  time  control
Your TV set can use the supporting technologies VPS (Video Programming 
System) and automatic time control for recording a broadcast.
VPS serves for monitoring the start and end time of the broadcast with 
analogue stations. The VPS time indication is compared by the digital 
recorder with the start time programmed by the user. If both times cor-
respond the recording is started. However, VPS is not supported by all 
stations.
The automatic time control assumes the corresponding monitoring of the 
start and end time for DVB stations. The recording is started at the begin-
ning of the broadcast and switched off at the end, even if the start and/
or end time have been changed by the programme provider. Broadcast 
interruptions are also taken into account. However, the automatic time 
control is not supported by all stations.
  DVB  Common Interface standard (CI)
If a programme has been recorded coded, the decoding process is carried 
out automatically the next night in the standby mode (when timer data 
settings do not differ). Please note that the TV set may not be switched 
off at the mains overnight and that the CA module with SmartCard must 
be inserted in the CI slot of the TV set.
If the recording is not decoded fairly soon after decoding, it may not be 
possible to decode it at all. The longer the time between recording and 
decoding, the greater the probability that the code is no longer valid.
➠  Scrambled hard disk recordings appear in the timer list until they are 
descrambled (page 93).
➠  You can also start decoding manually (see page 101).
➠  Your programme provider may not support later (time offset) descram-
bling. 
You can have programmes from scrambled stations descrambled already 
in DR continuous mode. This saves you having to decode directly recorded 
scrambled programmes later. An appropriate CA module with SmartCard 
must be inserted in the TV set’s CI slot for this.
➠  The playback of encrypted programmes is strongly dependent on 
which CA module is used. The playback of encrypted recordings may 
sometimes not be possible, or only to a limited extent.
  Hint: When possible, record unencrypted programmes or unencrypt 
them as soon as possible.
➠  Selection possibilities in the CA module menu (see operating manual 
of the TV set) and performance capability of your CA module depend 
on the type of module used and the installed software. Consult the 
manufacturer of the module if you have any questions.
Digital Recorder
 
						

							109 -
english
  DVB  Common Interface Plus standard (CI Plus)
Software update for CI Plus capable CA modules
Every now and then, there will be new system software for your CA 
module software. There are two software update types.
Recommended update:
Information on an available update is displayed. You can either run this 
or cancel the procedure. If you do not install the update, the informa-
tion will reappear in regular intervals until the update has been installed.
Forced update:
Information on an available update is displayed. The module does not 
decode any more until the update has been successfully implemented.
Troubleshooting (CA module)
The following information can help, if problems should occur when 
running a CA module:
Switch the TV set off to the standby mode. Remove the CA module from 
the TV set. Switch the TV set off completely. Wait a few seconds. Reinsert 
the CA module. Switch the TV set on again.
If errors continue to occur, make a note of the displayed two-digit error 
code (only for CI Plus capable CA modules). Contact your technical cus-
tomer service. You will find the service addresses on page 157.
Digital Recorder
CI Plus is an advanced development of the DVB Common Interface 
Standard. CI Plus slots are in principle downward compatible to the 
previous CI standard, i.e. CA modules and Smart Cards according to the 
past CI standard can continue to be used in CI Plus slots, as far as the 
programme provider permits this.
The regulations of the past standards (see page 27) likewise apply to CI 
Plus. There are however further additional regulations.
Programme providers, who use the CI Plus standard, can assign differ-
ent rights for their broadcast programmes. For instance, the programme 
provider can restrict or completely prevent recording or later watching of 
an encoded programme. If there are such regulations, these also apply 
to time-shifted watching of television programmes.
A screen message informs you of this fact, if you would like to record 
such a programme. Recording is carried out in such a case (an appropriate 
entry is displayed in the DR archive), later watching of the programme 
is however not possible at all or only for a limited period (e.g. 10 days). 
A possible time limitation of the playback will also appear in the cor-
responding entry in the DR archive.
The provider can also prohibit later decoding of a recorded encoded 
programme.
➠  All restrictions mentioned here are the responsibilities of the broad-
caster. The TV simply values the broadcaster set signalling as neutral.
Furthermore, the programme provider can prevent external copying 
of protected programmes, e.g. on a DVD recorder (also after possible 
decoding).
It could be necessary to enter the parental protection PIN of the CA mod-
ule when programming the data, if you want to record a CI Plus protected 
programme, which has been protected against viewing by minors. The 
secret number of the TV set is required for watching the programme later.
The appearance of the CA module menu of CI Plus (see operating in-
structions of the TV set) can deviate from the normal appearance of the 
TV menu.
 
						

							- 110
english
Connections menu
Settings for the connection of external appliances are made in this menu.  
Calling the connections menu
MENU: Call TV menu.
 Select Connections,
 go to the menu line below.
  Select the desired setting.
Explanations of setting possibilities in the Connections menu:
The sound components wizard helps you to configure the 
components which are used to reproduce the TV sound. 
You will find a description of the sound components 
wizard on page 117.
Here you can set the parameters of the DVB-T and the 
DVB-S
 (1 antenna with the antenna wizard. The setting 
options of the DVB antennas are described in the first 
time operation routine (from page 24).
See right column for explanations.
See page 111 for explanations.
AV connection settings
In the AV connection settings menu the parameters for the AV and AVS 
connection sockets can be adapted.
Calling AV connection settings
MENU: Call TV menu.
 Select Connections,
 go to the menu line below.
 Select AV connecting settings,
 go to the menu line below.
  Select the desired setting.
Explanations of setting possibilities in the AV connecting settings menu:
Indicate here whether a set and, if yes, which one is con-
nected to the AV socket.
You set the AV standard of the connected appliance to 
AV or AVS here. 
Normally you leave the setting on Automatic. If the 
standard of the connected appliance is not detected 
automatically, select the right standard. 
Ask your dealer or consult the operating manual of the 
connected appliance if necessary.
You set the signal type of the device connected to AV 
or AVS here. Normally, you should leave the setting at 
Automatic; otherwise select a suitable signal type. You 
can find out more from your dealer.
If this function is activated and you switch an AV device 
(not at AVS) that outputs a switching voltage to playback, 
its picture and sound will be played immediately on all 
TV station slots.
External devices
Sound 
components
  Antenna DVB
AV connecting 
settings
Miscellaneous
Antenna DVB     AV connecting settings     Miscel TV MENU
Connections
Sound componentsOK
AV standard     Signal type     Allow switchin
TV MENU
Connections
AV connecting settings
Device at connection AV 
No device          ...
   
Device at 
connection AV
   
AV standard
   
Signal type
  Allow 
switching 
voltage
(1 Equipment and upgrade options, see page 142.