Loewe Concept L26 Operating Instructions

							31 -
Operating modes – Radio
Radio
You can only receive radio stations via DVB. If you do not have any DVB radio 
reception, you can play a sound signal from an external device using the TV set via 
the sound/AV inputs.
Use the RADIO button on the remote control or the R on the 
control ring of the TV set to switch the radio on or off.
You can see a station list of the radio stations or with DVB-T in UK the station 
logo. In this case you can call up the station list by using the OK or INFO key. 
Station list is sorted by LCN.
You can see a station list of the radio stations. Digital DVB-T stations are indicated 
by , DVB-C stations by  and DVB-S stations by . Encrypted stations are 
additionally indicated by . Ask your specialist dealer about decoders or the use 
of a CA module and a Smart Card for the reception of encrypted stations.
When time and title are sent by the marked station these data are displayed at the 
bottom of the station list.
You can switch off the screen with the red coloured key. The LED indicator on 
the set changes from green to orange. You can switch the screen display back on 
by using the OK key, red or blue coloured keys, by using RADIO, MENU or 
END on the remote control or by using R on the control ring of the TV set.
Station switching with dark screen: by using – or + on the control ring of the TV 
set or by using the remote control P– and P+ or by using the numeric buttons (for 
DVB-T operation in UK, the buttons may be configured differently by the provider).
The sound menu can be called in the radio mode using the 
L button.
END
Radio:                      8  DLF    Numerical
18:00 - 18:10   Nachrichten AUDIO IN
 AV S
 AV 2
 AV 1
  1  B5 AKTL 
S  2  BAYERN 1 S  3  BR4 KLSK S  4  SUNSHINE S  5  ROCK ANT S  6  ANTENNE S  7  DLR S  8  DLF S
MENUEPG
  9  HR-INFO S10 MDR INFO S11 MDR FIGA S12 NDR KULT S13 SWR1 S14 SWR2 S15 WDR3 S16 WDR5 S17 OESTER 1 S18 MDR JUMP S19 JAZZ RAD S20 BLUSAT20 S
OKSwitch to ...           Scan stations
Select station         Previous station
Screen off/on         Change sorting09...
OK
)
Radio menu
Call radio menu
In the radio menu, as in TV mode, you can set the sound, search for radio stations 
and store them (automatically or manually – not with DVB-T mode in UK), delete 
stations from the list, rearrange them or change names and set the switching off 
and alarm functions.
EPG - Programme guide
For the DVB radio stations, you can also use the programme guide if the station 
currently active supplies data.
Call Programme guide
Treble                ...
INFOENDTimer functionsStations Radio menuSound
BA32789_021XelosModusRel_5_GB.in31   31BA32789_021XelosModusRel_5_GB.in31   3115.01.2007   16:56:3815.01.2007   16:56:38
 
						

							- 32
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV 
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start playback. 
In some video recorders the station must be switched on by activating the modu-
lator.
Then call the AV selection on the TV set with 0 AV. Select the menu item “VIDEO“ 
in the AV selection and call using OK.
To prevent “normal“ TV stations being found in the search, pull out the antenna 
plug from the antenna input of the VCR temporarily (the cable to the antenna 
system).
If you cannot see the test station or playback from the cassette, the VCR is 
transmitting on a different channel. You then have to search for the station or set 
it manually.
1.  Call the TV menu with the MENU button.
2.  Select the “Settings“ menu item with .
3.  Select the line below using  and use  to select “Stations“.
4.  Select the line below using and select “Manual adjustment“ using  
and call this menu using OK.
5.  Enter channel “E30“ under the “Channel“ menu item (“Antenna/cable (analo-
gue)“ select in this menu above, if necessary).
6.  Start search with the blue coloured key.
7.  When the station has been found, change the name if needed, confirm with 
OK and save with the red coloured key.
8.  A list of the stored stations is displayed.
9.  Select 0 (VIDEO) here and overwrite this station storage location using the red 
coloured key.
10. Hide the menu again using the END button.
Plug the antenna plug back in. 
If you now get interference because a TV station is transmitting on the same 
channel as the VCR station, you have to change the transmitting station on the 
VCR and search for the VCR station on the TV again.Login and connect equipment
You have logged in and connected all connected equipment in the initial instal-
lation. If you want to connect other equipment or disconnect equipment, call the 
connection wizard.
Call up the TV menu
Select “Connections“
Select the submenu line
Select “New devices/modifications“ and ...
Call using OK.
State what equipment you want to connect. State whether a piece of audio equip-
ment is to be connected (more details as of page 35). The connection wizard then 
shows you which sockets you should connect this equipment to. Then connect the 
equipment to these sockets according to the connection diagram.
Connecting video/DVD recorders
In addition to the connection via the Euro-AV sockets, you also have to connect 
the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD 
recorder to the TV set. The antenna signal is then available to the video/DVD 
recorder and the TV set.
Note: Use Euro-AV cables with right-angled plugs as shown.
ENTREE
ANTENNE
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEOSORTIE
ANTENNEAERIAL
RF OUT SORTIE
GL
D
R OUT AUDIO
AV1 ANT-TV
BA32789_021XelosModusRel_5_GB.in32   32BA32789_021XelosModusRel_5_GB.in32   3215.01.2007   16:56:4115.01.2007   16:56:41
 
						

							33 -
Operating additional equipment
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be done 
with the EPG programme guide (not with DVB-T in UK), teletext or manually. Call 
the “Timer list“ menu with the 
  button and press the red coloured key for the 
“Recording wizard“. Select whether you want to programme the recording via 
EPG, teletext or manually. You also have the option to programme recordings 
directly from the EPG programme guide or teletext.
Note: Copy-protected programmes are not output to the Euro-AV sockets for legal 
reasons.
When you have connected the Euro-AV socket to a recorder which has Digital 
Link Plus or a comparable system from a different manufacturer, the timer data of 
analogue terrestrial stations are transmitted from the TV to the recorder. The recor-
ding quality SQ or EQ is transmitted for DVD recorders, in addition to the station, 
date and time. The recording is then controlled by the recorder and the recorder 
tuner is used for reception of the station. The recording data are not saved in the 
timer list of the TV set. You will only find the timer data in the recorder.
If you want to record from digital stations, the TV tuner is used and the recorder is 
controlled by the TV set. Then the station is locked during the timer recording.
If you have connected a Loewe video recorder with Digital Link to the Euro-AV 
socket (without Digital Link Plus) and you are using the timer programming of the 
TV, the TV receiver is always used, for terrestrial stations as well. The TV controls 
the recording. 
You have to set the recorder to the AV input (signal source) to which the TV set is 
connected.
Then the station on the TV set is locked during the timer recording.
Digital Link must be switched on on the recorder. Read the operating 
instructions of your Loewe recorder for more information.
Use only Euro-AV cables, which are completely wired, otherwise Digital Link/Digital 
Link Plus will not work.
Another advantage of Digital Link is that you can install the recorder in a conce-
aled place (e.g. in a rack). You can control the recorder with the TV set.
If you have a Loewe recorder with both systems, you can use all the advantages. 
The advantages of Digital Link Plus are used for the timer recording; the advan-
tages of Digital Link for concealed installation of the recorder.
Video playback
There are several ways to see the picture and hear the sound of the VCR, DVD 
player/recorder or camcorder on your TV:
1.  You can usually use the Euro-AV sockets on the TV set and on the VCR. For 
camcorders or digital cameras, use the AVS sockets on the right of the TV set. 
DVD players/recorders and SetTopBoxes may have HDMI or component sockets 
for video and audio transmission. In this case, use the corresponding sockets 
on the TV set. 
  When playing back from a video recorder using Euro-AV socket and Digital 
Link Plus (or a comparable system from another manufacturer), the picture 
from the VCR is shown at the current channel location.
  When playing back from another VCR, camcorder or digital camera, use the AV 
selection   or the station list (OK) to select the AV socket/the device to which 
the VCR is connected.
  Video recorders transmit a switching voltage during playback, which the 
TV can evaluate (can be activated in the connection wizard or in the “TV 
menu – Connections – Miscellaneous – Allow switching voltage“ - set to 
“yes“). Then the picture of the video recorder is shown during playback at the 
current station location.
2.  You can use the antenna connection between the VCR and the TV without a 
Euro-AV socket. The sound is only transmitted in mono. Select the first menu 
item, e.g. VIDEO, in the AV selection.
Calling AV inputs in the AV selection:
Call AV selection
Select AV device/socket (or VIDEO if the video recorder has been 
connected only via the antenna socket) and use ...
to call.
Now you will see the playback from the connected AV device.
Calling AV input via the station list
Call the station list with the OK button in TV mode.
In the numeric and alphabetical sorting, you will always find the AV sockets at the 
top of the list. 
HDMI/DVICOMP. IN AV SVGA DVD
VIDEOAV selection
VCROK
BA32789_021XelosModusRel_5_GB.in33   33BA32789_021XelosModusRel_5_GB.in33   3315.01.2007   16:56:4415.01.2007   16:56:44
 
						

							- 34
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
The digital audio signal is applied at the “AUDIO DIGITAL OUT“ socket of the TV. 
For example, you can connect an external digital audio amplifier or the Loewe 
Auro system here.
An analogue audio signal from the TV set or another sound source which is recei-
ved at one of the Euro-AV sockets of the TV set is converted into a digital signal 
(PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from external 
analogue AV sources to PCM is not possible if the TV’s loudspeakers are used as 
a centre channel. In this case, connect your audio amplifier additionally to the TV 
(AUDIO OUT L/R) with a cinch cable and switch the audio amplifier to analogue 
audio input.
The digital TV sound or the digital sound of a connected auxiliary device is only 
audible via an external digital audio amplifier (e.g. Loewe Auro system).Assignment of digital audio inputs and 
outputs
Audio input “AUDIO DIGITAL IN“
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN“ and a coaxial 
digital audio output “AUDIO DIGITAL OUT“. If you are using an external digital 
surround amplifier for sound reproduction, you have to feed digital audio signals 
to the TV, e.g. from the DVD player. 
Connect the output socket of the DVD player (DIG OUT) to the TV‘s “AUDIO DIGI-
TAL IN“ socket with a cinch cable.
In the connection wizard, specify that audio transmission is to be digital. Specify 
that the digital sound is to be assigned for example to the Euro-AV socket 2 to 
feed the digital sound to the digital audio output of the TV set and via this to the 
external audio amplifier. Further information about this can be found on page 36.
S-VIDEO OUTDIG OUT
REARMAINSL
R
(CVBS) (Y/C)VIDEO OUTAUDIO
STEREO OUTVIDEO OUTIAUX-I/OIITO TV-I/OOPT OUTRIGHT SUBW.REARRIGHTFRONT
LEFT CENTERMULTICHANNEL AUDIO OUT
DIGITAL AUDIO OUTPCM/MPEG2/AC3/DTSLEFTFRONT
AV 2
DV DSurround Amplifier AUDIO DIGITAL
IN     OUT
PREOUT
FR FL
SL SRSUBCLL
RR AUX1 IN
DIGITAL
IN
DIGITAL
OUT AUX OUT AUX 2
BA32789_021XelosModusRel_5_GB.in34   34BA32789_021XelosModusRel_5_GB.in34   3415.01.2007   16:56:4615.01.2007   16:56:46
 
						

							35 -
Operating additional equipment
Connecting Loewe DVD Preceiver Auro 2216 
PS and Individual Sound loudspeaker system
You can play audio signals from the TV or DVD player in cinema quality with these 
components. In addition to the subwoofer illustrated below the Individual Sound 
system includes up to 5 loudspeakers for the front , center and surround reproduc-
tion. The centre signal can be reproduced alternatively by the TV speakers.
Connect the cubic socket on the DVD Preceiver to the “Master“ cubic socket on 
the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug the 
white plug (without kink protection) into the cubic socket on the subwoofer. For 
TV as a centre loudspeaker, connect “AUDIO IN C“ on the TV set to “PRE OUT C“on 
the DVD Preceiver using a cinch cable. Connect the digital audio output of the TV set “AUDIO DIGITAL OUT“ to the “DIGITAL IN“ input of the Preceiver using a cinch 
cable. Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver 
using the L-Link cable (provided with the Preceiver). Switch on the TV set and the 
Preceiver. Via the L-Link, the TV recognises whether the Preceiver is connected.
Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set 
the listener/speaker distances and adjust the speaker levels. Please consult the 
Preceiver manual.
If you want to listen to the sound via the TV speakers temporarily, call the Sound 
menu, select “Sound via“ and then “TV“. If you want to listen to the sound via the 
Loewe Auro system, select “AURO“ under “Sound via“. 
PREOUT 
L C  R  L  L 
SL LFE SR  R R TO TV   AUX1 IN DIGITAL 
IN 
DIGITAL 
OUT 
TV 
L-LINK  12V / 15mA EXT  AUX OUT  AUX 2  
 
ON 
Line IN  Power OUT 
OFF 
Bass Intensity 
Center to 
System connector 
230V~50/60Hz 
Surr. 
Front 
Right 
Surr. 
Front Subw. Left 
Right Center Left 
Slave 
Master 
R 
R  L 
C L 
Phase  Min. Max. 
TV 
Sat 0 180 
Loewe Individual Sound Loewe Flat-TV  
Loewe  
Auro 
AV 2-SCAR T 
SE RV IC E  CENTE R 
DIGI TA L  OU T 
COMPONENT 
VIDEO OUT 
Y 
Pb 
Pr 
 
L 
SL 
SR 
R  C 
LFE L 
SL  SR 
R 
C 
FLE 
BA32789_021XelosModusRel_5_GB.in35   35BA32789_021XelosModusRel_5_GB.in35   3515.01.2007   16:56:4615.01.2007   16:56:46
 
						

							- 36
Operating additional equipment
Connecting other audio amplifiers or active 
speakers
In the connection wizard, select “HiFi/AV amplifier“ under “Equipment selection: 
audio component“. The connection wizard allows configuration of different 
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with 
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the 
operating instructions for the audio amplifier to be connected.
Select “Digital“ under “Audio transmission“ for digital audio amplifiers. Con-
nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio 
input of the digital amplifier. 
Assign the digital audio input to the socket through which the corresponding pic-
ture is transmitted (e.g. AV2 if a DVD player is connected there). Then the digital 
sound is passed to the digital audio output of the TV set and fed to the external 
audio amplifier via this.
Specify which sound formats can be decoded with your digital amplifier (Dolby 
Digital, MPEG, dts).
Specify under “Type of amplifier“ whether the digital amplifier is a stereo or 
surround amplifier. 
If it is a surround amplifier, specify whether or not the TV loudspeakers are to be 
used as centre loudspeakers. Connect the centre output of the amplifier to the 
centre output of the TV using a cinch cable, if necessary. 
Note: do not use the centre loudspeaker connection on the amplifier; instead use 
the pre-amplifier centre output.Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers. The 
sound for the analogue amplifier is transmitted via the AUDIO OUT L/R connec-
tions of the TV to the audio amplifier. Connect the amplifier with two cinch cables.
Specify under “Type of amplifier“ whether the analogue amplifier is a stereo or 
surround amplifier. 
If it is a surround amplifier, also specify whether or not the TV speakers are to be 
used as centre loudspeakers. Connect the centre output of the amplifier to the 
centre output of the TV using a cinch cable, if necessary. 
Note: do not use the centre loudspeaker connection on the amplifier; instead use 
the pre-amplifier centre output.
If you want to listen to the sound via the TV loudspeakers temporarily, call the 
Sound menu using the 
L button, select “Sound via“ and then “TV“.
When connecting active speakers, select “Active speakers“ in the connection 
wizard under “Audio equipment selection“. The sound for the active speakers 
is transmitted via the AUDIO OUT L/R connections to the active speakers. Make 
connections to the active speakers using the cinch cables.
Make the audio settings on the TV set when active speakers are connected. When 
using an external audio amplifier, make the audio settings on the audio amplifier.
PREOUT
FR FL 
SL SR SUB C LL
RR AUX1 IN
DIGITAL
IN
DIGITAL
OUT AUX OUT AUX 2
AUDIO IN
CAUDIO DIGITAL
OUT AV 2
PREOUT
FR FL 
SL SR SUB C LL
RR AUX1 IN
DIGITAL
IN
DIGITAL
OUT AUX OUT AUX 2
AUDIO IN
CAUDIO OUT
L    R
BA32789_021XelosModusRel_5_GB.in36   36BA32789_021XelosModusRel_5_GB.in36   3615.01.2007   16:56:4815.01.2007   16:56:48
 
						

							37 -
Operating additional equipment
HDMI (DVI) connection
The HDMI connection (High Definition Multimedia Interface) allows 
digital picture and sound transmission via a connecting cable, e.g. 
from Loewe DVD Recorder Centros 2102/2172 HD. The digital 
picture and sound data are transmitted without data compression 
and therefore lose none of their quality. In the equipment connected, no analogue/
digital conversion is necessary, which might also have lead to losses in quality.
DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI 
adapter cable. This is possible because HDMI is based on DVI and is downwardly 
compatible. That means that the digital video signals are transmitted via HDMI 
- no audio signals are transmitted, though. In addition, both use the same copy 
protection method HDCP.
Connect the set with an HDMI connection using an HDMI cable (type A, 19-pin) 
to the HDMI socket of the TV set. Log in the HDMI connection in the connection 
wizard (TV menu - Connections - New devices/modifications).
Select the HDMI connection in the AV selection.
Call AV selection
Select HDMI/DVI socket and use ...
to call.
Start playback on the device connected with HDMI connection.
The set automatically recognises and sets the best possible format for the video.
If transmission occurs via a DVI/HDMI adapter cable, then you can feed in the 
appropriate analogue audio via the audio input sockets AUDIO IN L/R on the TV set. 
The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital 
audio signal in the connection wizard (TV menu - Connections - New devices/mo-
difications) and assign it to the HDMI/DVI socket. You can make the other settings 
for the audio amplifier as described for digital amplifiers on page 36. The digital 
audio signal of the DVI audio source is fed in at the AUDIO DIGITAL IN socket on 
the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the external 
amplifier.
Set geometry: as described for VGA/XGA connection.
VIDEOCOMP. INAV SVGA
DVD HDMI/DVI AV selection
VCROK
VGA/XGA connection
You can connect a PC or a Set Top Box (STB) and therefore use the 
TV screen as an output device.
Connect the PC/STB to the VGA/XGA socket on the TV using a VGA 
cable. 
When connecting to a PC, first set one of the following screen resolutions on your 
PC. 
800x600 60Hz (SVGA)
1024x768 60Hz (XGA).
When a Set Top Box is connected, set the following screen resolutions according 
to the options of the Set Top Box:
SDTV:  720x576i (PAL), 720x480i (NTSC),
720x576p, 720x480p.
HDTV: 1280x720p, 1920x1080i.
Select the VGA/XGA connection in the AV selection.
Call AV selection
Select VGA socket and use ...
to call.
Start the connected device.
Set geometry
Call the TV menu using the MENU button, select “Geometry“ using  and set:
If the picture is not positioned correctly, you can move the picture horizontally and 
vertically here so that it fills the whole screen. You can also set the phase position 
so that the picture appears in the best possible quality.
 
Setting colour standard
Call up Image settings (TV menu – Image). Select “Colour standard“ using  
and make your selection. 
The colour standard for a connected PC is RGB.
In Set Top Boxes, you usually set Ycc as a colour standard. Other formats such as 
Ypp or RGB can also be output. Please consult the operating instructions of the 
device connected. 
If the wrong standard is selected, you will recognise this by the wrong colours in 
the display.
VIDEOCOMP. INVGA
DVDAV SHDMI/DVI AV selection
VCROK
BA32789_021XelosModusRel_5_GB.in37   37BA32789_021XelosModusRel_5_GB.in37   3715.01.2007   16:56:4915.01.2007   16:56:49
 
						

							- 38
Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN 
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital 
audio signal in the connection wizard (TV menu - Connections - New devices/mo-
difications) and assign it to the VGA/XGA socket. You can make the other settings 
for the audio amplifier as described for digital amplifiers on page 36. The digital 
audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV. 
Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the amplifier.Component video connection
If you have a DVD player/recorder with Component OUT connec-
tions, you can connect it to the SD/HD-COMPONENT IN sockets 
of the TV instead of to the Euro-AV sockets. The connecting cable 
with three cinch plugs each transmits picture information. The 
playback is of a better quality than via the Euro-AV socket.
You need another cinch cable for the analogue sound transmission. Connect the 
analogue audio outputs of the DVD player to the AUDIO IN L/R sockets on the TV 
set. The sound is reproduced via the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio ampli-
fier connected to the TV, make a connection between AUDIO DIG OUT of the DVD 
player and AUDIO DIGITAL IN of the TV set. 
Log in the component/device in the connection wizard: 
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital 
audio amplifier is also connected. You can make the other settings for the audio 
amplifier as described for digital amplifiers on page 36.
Set the signal at the component input in the connection wizard: Set to “Automa-
tic“ first. If the signal is not reproduced when playback is started, consult the ope-
rating instructions of the DVD device connected to find out what screen resolution 
is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
Call AV selection
Select COMP. IN sockets and use ...
to call.
Start playback on the connected device.
Set Geometry and Colour standard: as described for VGA/XGA connection.
VIDEO
COMP. INAV SVGA
DVDDMI/DVIHDMI/DVAV selection
VCROK
BA32789_021XelosModusRel_5_GB.in38   38BA32789_021XelosModusRel_5_GB.in38   3815.01.2007   16:56:5315.01.2007   16:56:53
 
						

							39 -
Operating additional equipment
Set remote control
The specified key combination must be pressed (approx. 5 s) until one of the LEDs  
flashes twice. The remote control can be set for the different devices as follows:
Device    Hot keys
Loewe TV (Chassis L2650) 
 +  
						

							- 40
What to do, if ...
Problem
The “Recording“ menu point is not displayed in the 
TV menu.
“Connections“ cannot be called in the TV menu 
(deactivated)
The control of the Loewe video recorder and the 
timer do not work or do not work properly.
General problems with connecting external equip-
ment via an AV input
A decoder connection does not function or is faulty.
All menus appear in the wrong language.Possible cause
No video or DVD recorder logged in
A time recording is in progress
a)  The Digital Link function is not activated or not 
possible in the recorder.
b)  Euro-AV cable is not connected.
c)  Recorder is not logged in.
a)   The device is not logged in to the connection 
wizard or is connected differently than is shown in 
the connection diagram.
b)   The AV norm is set incorrectly.
c)  The AV signal is set incorrectly.
a)  The signal is not decoded because the wrong deco-
der stations are selected in the connection wizard.
b)  The sound is missing in decoder mode because the 
wrong decoder sound is assigned in the connection 
wizard.
Menu language has been set incorrectly.Remedy
Log in the video or DVD recorder in the connection 
wizard and connect the device.
Wait until the timer recording has ended or delete the 
timer.
a)  Activate Digital Link in the recorder (see operating 
instructions of the video recorder).
b)  Connect the Euro-AV cable.
c)  Log in recorder.
a)   In the connection wizard (TV menu – Connec-
tions – New devices/modifications), compare the 
connection diagram with the actual installation and 
connect as shown, if necessary.
b)  Set the norm correctly.
c)  Set the AV signal correctly.
If “Automatic“ is set for AV norm or AV signal, this 
can lead to errors for signals which do not conform 
to the norm. Then the norm and the signal are to be 
set according to the specifications in the operating 
instructions of the external device.
a)  Follow the instructions in the connection wizard 
again (TV menu – Connections – New devices/mo-
difications) and select the corresponding decoder 
station.
b)  Follow the instructions in the connection wizard 
again and select the right audio source (decoder, 
TV or autom.), see instructions of the decoder.
Set your menu language:
Press the INFO button in TV mode (index). Select the 
first index item and call it by using OK. Then select the 
language and confirm with OK.
BA32789_021XelosModusRel_5_GB.in40   40BA32789_021XelosModusRel_5_GB.in40   4015.01.2007   16:57:0615.01.2007   16:57:06