Home > Loewe > Television > Loewe Concept L26 Operating Instructions

Loewe Concept L26 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Loewe Concept L26 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 36 Loewe manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21 -
    Operating modes – TV
    Calling additional functions
    Select additional functions such as Image+✳, Teletext subtitles, 
    Personal teletext pages, Headphone volume, Scan stations and 
    to move the picture up and down.
    Call timer overview
    If timer recordings have been programmed, you will see when 
    which station is recorded here.
    Select picture format
    The TV set sets the best picture format automatically when Auto 
    format is switched on. If you want to set a different format, 
    press this button until the desired format is selected or select the 
    format with .
    In sets with an LCD screen, you can switch the panorama picture over to distorti-
    on-free representation. Dark margins are then visible on the left and right of the 
    picture. 
    Switching over: Keep the M button on the set pressed, at the same time press the 
    ”Picture format” 
      button on the remote control briefly.
    Resetting: Press the same button combination again. 
    Move picture up/down
    To make picture subtitles visible, you can use  to move 
    the picture up or down with the picture formats “Panorama“, 
    “Cinema“ and “Zoom“.
    Note: for DVB-T stations in UK you can switch back and forth quickly between two 
    stations using this button
    TV menu
    Call up the TV menu
    You will find a description of the picture and sound settings on page 19. The TV 
    menu offers other options for recording, connections and settings of the TV set.For a recorder that is logged in, you can find the following menus in the 
    “Recording“:
    Recording wizard - to programme new timer recordings
    • Via EPG      • Via teletext (VPT)      • Manually
    You will find further information about timer recording on page 33.
    Timer list
    Here you will find a list of programmes programmed for recording. You can 
    change the recording data or delete programmed recordings and programme new 
    recordings.
    Pre-record time and Post record time
    For recordings without VPS/PDC, set a lead and lag time here so that the pro-
    gramme is fully recorded despite any slight differences in the time. 
    Under “Connections“ you will find the following functions:
    New devices/modifications (connection wizard)
    The connection wizard helps you connect and log in additional equipment such 
    as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV 
    decoders, equipment with component signals and digital HDMI/DVI signals.
    Antenna DVB
    • Antenna DVB-T     • Antenna DVB-S
    ✳
    You can find more information on pages 13 and 14.
    Digital Link Plus
    Transmission of the station data from the TV set to the video/DVD recorder if a 
    recorder with Digital Link Plus is connected.
    Miscellaneous (connections)
    •  Set AV norm for the connections manually (if it is not recognised automatical-
    ly).
    •  “Assign audio digital signals“ to one of the AV sockets.
    •  “Allow switching voltage“ to display the signals of the connected device imme-
    diately on the screen via Euro AV during playback.
    •   RGB insertions at AV2 to play back RGB signals at all station storage locations.
    •  Select decoder stations and set sound encoding.
    Under “Settings“ you will find the following functions:
    Stations
    Here you can search for and store new stations automatically or manually. With 
    “Change stations“, you can rearrange and delete the stations and change station 
    names (not for DVB-T stations in UK).
    • Search wizard     • Manual adjustment     • Change stations
    Zoom
    Cinema Panorama 16:9Picture format
    4:3
    END
    Timer list      Fri 12.09./14:1212.09.  18:00-18:30  3SAT   Die Köchin, die Putzfrau und d
    Detail    New recording     Change
    DeleteTEXTINFO
    Picture adjustment        ...
    INFOENDSettingsConnectionsRecordingSound TV menuPicture
    Teletext subtitlesPersonal teletext pagesHeadphone volumeAdditional functionsOKINFOEND
    BA32789_021XelosModusRel_5_GB.in21   21BA32789_021XelosModusRel_5_GB.in21   2115.01.2007   16:55:2815.01.2007   16:55:28
     
    						
    							- 22
    DVB subtitles
    If the station provides DVB subtitles, then you can have the TV display them 
    permanently or suppress their display. You can also select between subtitles “for 
    translation“ or “for impaired hearing“.
    1.  Call the “TV menu“ via the MENU button.
    2.  Select the “Settings“ line and confirm using OK.
    3.  Select the “Miscellaneous“ line and confirm using OK.
    4.  Select the “DVB subtitles“ line and confirm using OK.
    Note: If you have selected “Subtitles off“, then the set generates an on-screen 
    display when subtitles are available.
    By using the END button, you can open the status display and you can display the 
    subtitles again by using the TEXT button.
    •  Call the status display by pressing the END button, if it is not yet displayed.
    •  When the status display is visible, press the TEXT button. 
    Select the desired language and confirm using OK. The presetting changes for 
    the current programme.
    •  Which subtitle languages can be selected depends on the provider.
    •  The automatic shortlist is determined by the menu language and the selection 
    made in the “DVB subtitles“ settings menu.
    •  By pressing the END button, you can hide the menu again.
    Note: DVB subtitles are not available when digital teletext is being displayed.
    Operating modes – TV
    Parental lock
    You can lock the TV from “immediatly“, “daily“ for a certain period of time or 
    “agerelated“ for DVB programmes with age restrictions.
    Here, you determine the PIN to enter if you want to watch locked programmes.
    Timer functions
    You can have your TV switch off at pre-programmed times or wake you/remind you 
    with radio or TV. If you are not present at the time, a safety prompt makes sure the 
    TV switches off again after 5 minutes.
    • Switch off today only     • Switch off daily     • One-time reminder
    • Wake up Mon-Fri     • Wake up Sat     • Wake up Sun     
    • Wake up with 
    ✳  • Wake up signal volume
    Language
    If “your“ menu language is not set, you have to select the “Language“ menu in a 
    language that you do not understand. Therefore here is a simple way to set the 
    right menu language: 
    1. Press the INFO button (index), select the first listing (this is above A).
    2.  Call the language selection by pressing the OK button.
    3.  Now select the desired language and confirm it by pressing the OK key.
    4.  Hide the menu again with the END button.
    Miscellaneous (settings)
    On-screen displays
    You can set the duration and position of the station and status display, define the 
    content of the status display and switch the automatic info texts on or off:
    • On-screen display position    • On-screen display time     • Programme title   • 
    Sound mode     • Time     • Alarm time     • Sleep timer    • Automatic info
    Time and date
    If you receive teletext, the set registers the time and date. These are required for 
    timer recordings, timer functions and EPG. If you do not receive teletext, then you 
    have to enter the date and time; you should not switch off the set using the mains 
    switch since the settings will then be lost.
    DVB software
    Update of DVB software via satellite 
    ✳.
    DVB subtitles
    • Subtitles off     • Subtitles for the Hearing Impaired
    • Subtitles as translation for foreign language programmes
    DVB character set
    • Western European     • Polish     • Standard.
    ✳ Only for sets with DVB-S
    END
    INFO
    Subtitles off
    for impaired hearing
    for translationDVB subtitlesOK
    BA32789_021XelosModusRel_5_GB.in22   22BA32789_021XelosModusRel_5_GB.in22   2215.01.2007   16:55:3215.01.2007   16:55:32
     
    						
    							23 -
    Operating modes – TV
    Removing the CA module
    1.  Switch the TV set off with the mains switch.
    2.  Remove the cover from the back of the set 
    on the upper left. 
    3.  Press the eject button at the module slot; 
    the module is unlocked.
    4.  Remove the module from the set.
    Inserting a new CA module
    After you insert a new CA module (CI module 
    (1 is 
    displayed in the menu) and switch the TV set on, the 
    following dialogue is displayed:
    After you press the OK button, the system starts the wizard to carry out the auto-
    matic station search.
    Check the proposed search parameters and let the set search for new stations.
    Calling the CA module menu
    Here you can call up information on the inserted conditional access module and 
    the smart card. To do this, use the MENU button to call the TV menu, select the 
    line “Settings“, “Miscellaneous“ and then the entry “CI module - xxx“ (in place of 
    “xxx“ stands the name of the provider which is output by the smart card. The term 
    CI module 
    (1 displayed in the menu refers to the CA module. The content of this 
    menu depends on the particular supplier of the CA module.
    Note: This menu is only available for digital stations.
    Installing new DVB software
    To ensure your DVB-S receiver is always performing at the state of the art, newly 
    developed software versions are made available from time to time; these are 
    broadcast via satellite and can be automatically installed on your set (only possible 
    via ASTRA1).
    Software is recognised automatically
    The set can determine whether a new software version is available. This occurs at 
    night when your EPG is automatically updated. For this, your TV set has to remain 
    in the standby mode (do not switch off using the on/off button on the set).
    If a new software version has been found, the set will indicate this with an on-
    screen message the next time the set is switched on: You can decide whether or 
    not you want to download the new software.
    Confirm using OK, so that the new software can be loaded and installed via 
    satellite. Continue as set out in the “Downloading software“ section
    Autom. station search
    Your TV set has detected a new CI module. This requires a station 
    search for all new receivable stations.
    CA moduleCI-Slot
    Searching for new software
    If you want to carry out a manual search for new software, proceed as follows:
    Call the TV menu using the MENU button.
    Confirm the “Settings“ using OK.
    Confirm the “Miscellaneous“ using OK.
    Select “DVB software“ and press OK.
    If you start the search using OK, the set checks if there is a new software 
    version available.
    If there is a new version available, the set generates an on-screen message.
    Downloading software
    If you press OK in the dialogue above, you can decide whether you want to 
    download the new software immediately, when you switch off the set or not at 
    all. We recommend you always carry out the update of the digital software. This 
    is the only way to ensure your set is always up to date.
    If you do decide to update, the software is initialised on your set and you are 
    informed of the status with a grey bar.
    Do not switch your set off during this time. This process may take up 
    to one hour. You will be informed when the process is completed.
    After the software is updated, you will be asked to switch your TV set off and 
    back on again using the on/standby switch.
    If the update was not carried out, you will be asked several times when you switch 
    on the set whether you want to carry out this update.
    (1 CA module has established itself as the usual market name. 
        This cannot be taken into consideration in the menu yet. 1.
    2.
    3.
    4.
    5.
    6.
    1.
    2.
    3.
    Update digital TV software
    Current version: V3.x.x
    You can search for a new software version with OK.
    Update digital TV software
    Current version: V3.x.x
    New version: V3.1.0
    BA32789_021XelosModusRel_5_GB.in23   23BA32789_021XelosModusRel_5_GB.in23   2315.01.2007   16:55:3315.01.2007   16:55:33
     
    						
    							- 24
    Operating modes – TV
    Image+
    Image+ is a picture improvement specially developed by Loewe, which delivers a 
    sharper, lifelike and colour-fast picture richer in detail and contrast. 
    Image+ is not integrated in the Xelos A26/32 sets.
    Image+ menu
    Call the menu “Additional functions“.
    Use to move to the corresponding selection/setting....
    and use  to select/set and use....
    to activate.
    In the Image+ menu, the functions Image+ “on“, “off“ and “Demo“ can be set.
    The Image+ settings can also be opened via the TV menu – “Picture“.
    Call up TV menu.
    Use to mark Picture.
    Use  for associated selection and mark more… with 
    .
    Call up more… with OK and mark Image+ with .
    Use  to access the associated selection. 
    Set as described in the Image+ menu above.
    The standard setting at delivery of the set is Image+ “on“.Image+ demo mode
    In order to show the way Image+ works, a “Demo mode“ is integrated.
    In “Demo mode“, the current picture is divided into two parts. The left half of the 
    picture is shown in “normal“ mode, the right half in the Image+ optimised mode.
    The demo mode can be closed by pressing on any button on the remote control.
    Image+Teletext subtitlesPersonal teletext pages Additional functionsoff                       ...
    INFOEND
    Image+DemoonINFOENDAdditional functions
    offOKActivateOK
    Image+DemoINFOENDAdditional functions
    off on
    Image+ off
    Image+ on
    Picture adjustment        ...
    INFOENDSettingsConnectionsRecordingSound TV menuPicture
    INFO END PictureTV menuPicture adjustmentColour Brig
    Contrastrpnessmore ...OK
    INFO END Picture
    on              ...  TV menuPicture formatMove picture up/downrpnessAuto formaImage+
    BA32789_021XelosModusRel_5_GB.in24   24BA32789_021XelosModusRel_5_GB.in24   2415.01.2007   16:55:3415.01.2007   16:55:34
     
    						
    							25 -
    Picture in picture (PIP)
    Note: The coloured keys do not work as described below with DVB-T stations in 
    UK, but they operate as described on page 30 (Digital Teletext).
    Picture in picture displays are possible if the set has an analogue PIP tuner or a di-
    gital satellite tuner in addition to the analogue TV cable tuner. You can have a PIP 
    tuner or a digital satellite tuner retrofitted. Set-specific equipment and retrofitting 
    options for PIP and satellite tuners, see pages 44 and 45.
    If there is no other tuner installed, you can use PIP (AV-PIP) when playing a video 
    recorder or DVD player.
    For a retrofitted PIP tuner, the following PIP displays are possible: Main picture 
    analogue – PIP picture analogue, Main picture digital – PIP picture analogue.
    The following is not possible: Main picture digital – PIP picture digital, Main 
    picture analogue – PIP picture digital.
    For “Split screen,“ the PIP picture is displayed on the right side of the screen. Both 
    pictures share the screen in two equal halves. For the “Small PIP“ setting, a small 
    picture is displayed in the TV picture.
    The green bar/frame indicates that the control commands have an effect on the 
    PIP picture. The white bar/frame means that the control commands have an effect 
    on the main picture. Use the green coloured key to switch between the PIP 
    picture and the main picture, for example to change stations. 
    The frame or bar between the pictures is green for the time being.
    Show/hide PIP picture
    PIP picture as freeze picture
    The bar/frame has to be green. If not, press the green co-
    loured key.
    If you press the red coloured key, the PIP picture freezes. Press 
    again - moving picture.
    Selecting the station of the PIP picture
    The bar/frame has to be green. If not, press the green co-
    loured key. Then select the station as usual.Select the station of the TV picture (main picture)
    The bar/frame has to be white. If not, press the green coloured 
    key. Then select the station as usual.
    Note: With UK sets, you switch over from the green to the white 
    bar/frame by using the PIP key. By pressing on the PIP key once 
    more, PIP is switched off.
    PIP scan in the PIP picture
    The bar/frame has to be green. If not, press the green co-
    loured key.
    Start scanning the stations using the blue coloured key. The 
    bar/frame turns blue. 
    The stations now change automatically. Stop scanning the stations by using the 
    blue coloured key. The bar/frame turns green again.
    Interchanging PIP picture/TV picture
    The bar/frame has to be green. If not, press the green co-
    loured key.
    Interchange the pictures by using the yellow coloured key.
    1  ARD  Der Wilde Westen  21:15 – 22:15
    41  ZDF  Eifellandschaften  21:00 – 21:451  ARD             Der Wilde Westen                         21:15 – 22:15
    41  ZDF  Eifellandschaften  21:00 – 21:45
    Operating modes – PIP
    BA32789_021XelosModusRel_5_GB.in25   25BA32789_021XelosModusRel_5_GB.in25   2515.01.2007   16:55:3915.01.2007   16:55:39
     
    						
    							- 26
    Operating modes – PIP
    Functions in the PIP menu
    In the PIP menu, you can set the PIP type (small picture or split screen) and the 
    position of the small picture.
    Call the PIP menu (PIP must be active, green bar/frame)
    Setting the PIP type
    You can have the PIP picture displayed as a small PIP or split screen. 
    Switch to small PIP:
    Select “Type“ and then “Small PIP“
    For the small PIP, you will see a coloured frame around the PIP picture.Position of the PIP picture
    Move the PIP picture with the arrow keys to a corner of the TV 
    picture. In this case, the frame around the PIP picture has to be 
    green, and there should not be any other displays visible on the 
    screen.
    Switch to split screen:
    You can have the PIP picture displayed on the right hand side of the screen. Both 
    pictures share the screen in two equal halves. You will see a coloured vertical bar 
    between the pictures
    Call the PIP menu (PIP must be active, green frame)
    Select “Type“ and then “Split Screen“.
    INFOEND
    Split screen
    Smmall PIPTypeTV menu
    Settings
    PIP
    INFOEND
    Small PIPTypeTV menu
    Settings
    PIPSplit screen
    INFOEND
    Split screen
    Smmall PIPTypeTV menu
    Settings
    PIP
    BA32789_021XelosModusRel_5_GB.in26   26BA32789_021XelosModusRel_5_GB.in26   2615.01.2007   16:56:0515.01.2007   16:56:05
     
    						
    							27 -
    Operating modes – EPG
    When receiving digital terrestrial and digital satellite stations, you may find that 
    two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If 
    you call the EPG menu in the EPG mode by using the MENU button, then select 
    “Station selection,“ you can select the duplicate station and deactivate it by using 
    OK).
    You have direct access to the selection lines above to pre-select the day, the time, 
    the station and the topic.
    Blue coloured key: Call Select date/time/stations/topics
    Use  to select the menu line for the date, time, stations or topics. Use  
    to select within the menu line.
    If, for example, you are looking for the next news, select today’s date, “Soon“ 
    under Time, “All“ under Stations and “News“ under Topics.
    Then you get a list of all news programmes in the programme list below.
    If you want to mark one of these news programmes, return to the programme list 
    using the blue coloured key, select the desired news programme by using  
    and mark this by using OK.EPG - Programme guide
    EPG is an electronic programme guide. With this system, you can easily find the 
    programmes that interest you (sorted according to day, time, stations and topics). 
    You can mark programmes and programme recordings.
    Depending on whether you are receiving analogue stations by cable/antenna or 
    digital stations, you will have different programme guides. 
    A wizard is activated the first time you use EPG (not with DVB) which guides you 
    through the necessary settings. Then run the data capture (see next page).
    Using the EPG
    Switch EPG on/off
    The programme guide menu is divided into two areas: at the top, you can make the 
    settings for the programme list (date, ..., topics); on the bottom, the programme list 
    is displayed. Use the blue coloured key to switch between the two areas to make 
    your selections. 
    All programmes currently running are listed initially in the programme list. With the 
     buttons, select the programme you want to watch and switch over with the 
    OK button.
    Brief information is shown below the programme list for some programmes. If more 
    detailed information is available, you can call it using the TEXT button.
    Use P+/P– to scroll up or down through the pages of the programme guide. 
    In the selection lines for date and time above, you will see the time change when 
    scrolling; when you scroll further, the date also changes. 
    When the “Time“ line is selected, you can enter the time as of which the pro-
    grammes are to be displayed; use the numeric buttons on your remote control to do 
    this. Always enter four digits, such as 0900 for 9 a.m.
    If programmes are displayed which have not yet started, you can mark these with the 
    OK button. The TV set then switches automatically to this station at the given time.
    MENUTEXTP+
    P–ENDOK
    OK
    Detail                View               Record   
    Page 
    						
    							- 28
    Operating modes – EPG
    In front of the programme’s title, the system places an . This station is switched 
    later to this programme when the set is switched on. If the TV is off, it switches on 
    again automatically at the beginning of the marked programme if this has been 
    set in the EPG menu. If you are out, a security prompt prevents the TV set staying 
    on unattended.
    Before leaving the upper selection lines using the blue coloured key, select a 
    specific line. If you have switched back to the programme list, you can change this 
    menu line using  without having to leave the programme list.
    Programming recording for recorders
    The programme marked using the  buttons can be prepared for recording by 
    pressing the red coloured key. In the following menu, confirm the timer data or 
    change them as required. Then a red dot is set in front of this programme in the 
    EPG programme list as an identification (if timer data is being transferred to the 
    recorder, no red dot is set). If you select this programme, you can delete it from 
    the timer using the red coloured key (if the timer data has been transferred to a 
    recorder, the timer has to be deleted there).
    EPG menu
    Call EPG menu
    You will find the following settings in the EPG menu:
    • Select provider     • Station selection     • Timer list     • Data capture
    • Switch on TV when marked
    Selecting providers and stations
    If you want to change the provider for analogue TV reception (the station which 
    transmits EPG data) to have other stations evaluated, you can do this under 
    “Select provider“.
    Select “Select provider“ and call this menu using OK. If the station you want to 
    switch to is not listed in the “Select provider“ list, then use the yellow coloured 
    key to start the automatic search for stations with EPG data. This takes a while.
    Or, if you know the station that transmits EPG data, press the blue coloured key 
    to compile manually. Select the provider in the station list and adopt it by using 
    OK and return to the provider selection using .
    Select the provider in “Select provider“ and adopt it using OK. Then a station list 
    search is performed. The stations offered by the provider are displayed in a list.First, all stations are marked with the  symbol so that their data is display-
    ed in the programme guide (precondition: provided EPG data is broadcast for 
    the respective station). Stations indicated by  are analogue terrestrial/cable 
    stations, stations indicated by  are DVB-T stations, stations indicated by  are 
    DVB-C stations and stations indicated by  are DVB-S stations. These stations are 
    available for evaluation in the programme guide.
    Select the stations you want to omit from the programme guide one after another 
    and deactivate each one by using OK. The  symbol is removed.
    Data capture
    After these settings or after each time the set is switched off using the mains 
    switch, the data must first be collected, before switching on the set. 
    To do this, select the station you have defined as a provider and leave the TV 
    set switched on for about one hour or switch the set to the standby mode. After 
    about two minutes in standby mode, the indicator on the set turns orange. The 
    data acquisition begins and lasts about 1 hour. When data acquisition is termi-
    nated, the indicator turns red again. The data are also automatically captured 
    between 2 a.m. and 5 a.m. when the TV is switched to standby.
    A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + analogue) 
    in the EPG menu. 
    Note: If the TV set is switched off using the mains switch or the mains plug is 
    pulled out, all EPG data are lost.
    If, for example, you cannot receive any analogue EPG providers or if you only use 
    DVB, you should set the data capture to “on (only for DVB)“. 
    Switch on TV when marked
    You can have the TV switched on automatically from standby at the beginning of 
    the marked programme. If you are not present at the time, a safety prompt makes 
    sure the TV switches off again after 5 minutes.
    INFOENDSwitchData captureStation selectTimer list EPG menuSelect providerOK
    BA32789_021XelosModusRel_5_GB.in28   28BA32789_021XelosModusRel_5_GB.in28   2815.01.2007   16:56:1915.01.2007   16:56:19
     
    						
    							29 -
    Operating modes – Teletext
    In Multiple pages, scroll using . You can see which multip-
    les pages can be called in the bottom menu line.
    Call contents page 100
    Call the TOP table
    The TOP table is a general list of teletext. You can only call the 
    table for stations that use the TOP operating system.
    Use  to select the topic group. 
    Select the topic column using . 
    Select the topic with  and display page with OK.
    Enter the page number directly
    Displaying teletext pages
    Stop self-turning pages (HOLD)
    Zoom page: top part - bottom part - normal size (press button 
    several times)
    TV picture on/off (Split Text)Analogue Teletext
    Teletext transmits information such as news, weather, sports, programme previews 
    and subtitles. 
    Teletext on/off
    Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV 
    supports both these systems. The pages are divided into topic groups and topics. 
    After switching on the teletext, up to 3,000 pages are stored for Xelos and 1,500 
    pages for Modus for fast access. 
    Page selection with the coloured keys
    The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to the 
    last line show you which coloured keys you can use to scroll to topic groups and 
    topics.
    Red: back to the previously seen page (not in FLOF)
    Green: on to the next page (not in FLOF)
    Yellow: to the next topic (only in TOP and FLOF)
    Blue: to the next topic group (only in TOP and FLOF)
    Other page selection options:
    Select one page number specified on the page by using 
    (Page Catching)
    call
      100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
    Teletext im Ersten
    Bulmahn: Bildung statt Eigenheim . . . . . . . .   120
    Wird auch der Nahverkehr teurer? . . . . . . . .   121
    Australien: Keine Zugeständnisse  . . . . . . . .   122
    Tote bei Zugunglück in Schweden . . . . . . . .   532
    Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
    Formel 1: Schumacher erneut vorne . . . . . . .  213
    Tagesschau . .  110/112 Kultur. . . . . . . . .   500
    Wetter. . . . . . . . . . . 170 Gesellschaft . . . 530
    Sport. . . . . . .  200/600 Lotto/Toto . .   666
    TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                      Internet: www.ard-text.de
    –        +Inhalt     tagesschauPage selection
    Index
    > 101
    Formel 1: Schumacher erneut vorne . . . . . . .213
    Tagesschau . .  110/112 Kultur. . . . . . . . .   500
    Wetter. . . . . . . . . . .170Gesellschaft . . . 530   
    Sport. . . . . . .  200/600 Lotto/Toto . .   666
    TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                      Internet: www.ard-text.de
    –        +Inhalt   tagesschau
    Page selection                 OK   View
    Zeitplan       Fußball1  2  3  4  5  6  7  8  9  10  11  12–        +
    Bulmahn: Bildung statt Eigenheim . . . . . . . .   120Wird auch der Nahverkehr teurer? . . . . . . . .   121
    Australien: Keine Zugeständnisse  . . . . . . . .   122
    Tote bei Zugunglück in Schweden . . . . . . . .   532
    Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .   204
    Formel 1: Schumacher erneut vorne . . . . . . . 213
    Tagesschau . .  110/112 Kultur. . . . . . . . .   500
    Wetter. . . . . . . . . . . 170 Gesellschaft . . . 530   
    Sport. . . . . . .  200/600 Lotto/Toto . .   666
    TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                      Internet: www.ard-text.de
    –        +Inhalt   tagesschau
    Seitenauswahl
    TOP table
    Wetter
    Vorhersage
    Städte
    Regional
    Reisen
    int. Städte
    BiowetterÜbersicht
    tagesschau
    Wetter
    Sport 1
    TV Guide
    ARD heute
    ARD morgen
    FS-Sendungen
    TV Guide 2
    more  . . .
    OK
    END
    ViewOK
      100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
    Teletext im Ersten
    Bulmahn: Bildung statt Eigenheim . . . . . . . .   120
    Wird auch der Nahverkehr teurer? . . . . . . . .   121
    Australien: Keine Zugeständnisse  . . . . . . . .   122
    Tote bei Zugunglück in Schweden . . . . . . . .   532
    Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
    Formel 1: Schumacher erneut vorne . . . . . . .  213
    Tagesschau . .  110/112    Kultur. . . . . . . . .  500
    Wetter. . . . . . . . . . . 170    Gesellschaft . . .  530
    Sport . . . . . . .   200/600    Lotto/Toto . . . .   666
    TV Guide . . . .   300/400    Wirtschaft  . . . .  700
                      Internet: www.ard-text.de
    –        +InhalttagesschauPage selection
    Index
    > 101
    BA32789_021XelosModusRel_5_GB.in29   29BA32789_021XelosModusRel_5_GB.in29   2915.01.2007   16:56:2115.01.2007   16:56:21
     
    						
    							- 30
    Operating modes – Teletext
    Programme timer recordings
    A video and/or DVD recorder must be connected and logged in in the connection 
    wizard.
    Call the programme pages of the current station in teletext mode using the Direct 
    recording button 
     . Scroll to the teletext page in which the programme to be recor-
    ded is listed if necessary. Select the programme you want to record by with  
    and confirm with the OK button. For “Timer data,“ select the VCR or DVD recorder 
    and whether you want to record once or a series of times. Confirm with OK. 
    Teletext menu
    Display teletext menu
    Here you will find functions such as
    •  “Newsflash“, this is an on-screen display of the latest messages (e.g. page 
    111). 
    •  “Reveal“ concealed information, e.g. VPS pages in the station preview pages.
    •  Programme wizard for recording via teletext.
    In the settings, you will find menus to define the station preview pages, subtitle 
    pages and personal text pages, and menus to set the character set selection as 
    well as HiText graphics.
      100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
    Teletext im Ersten
    Bulmahn: Bildung statt Eigenheim . . . . . . . .    120
    Wird auch der Nahverkehr teurer? . . . . . . . .    121
    Australien: Keine Zugeständnisse  . . . . . . . .    122
    Tote bei Zugunglück in Schweden . . . . . . . .    532
    Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .    204
    Formel 1: Schumacher erneut vorne . . . . . . .  213
    Tagesschau . .  110/112  Kultur. . . . . . . . .    500
    Wetter. . . . . . . . . . .  170  Gesellschaft . . .  530   
    Sport. . . . . . .   200/600  Lotto/Toto . .    666
    TV Guide . . .  300/400  Wirtschaft. . . . . .   700
                      Internet: www.ard-text.de
    Inhalt    tagesschau
    Index
    > 101
    ENDINFO
    MenuRevealcordingReSettingsNewsflash
    Personal text pages        ...
    Digital teletext operation (only for MHEG-5 device versions x27/28)
    In the UK, the teletext for DVB-T stations is transmitted as per the MHEG-5 stan-
    dard (standard of the Multimedia and Hypermedia Expert Group). It contains text, 
    graphics, functions and links.
    The operation of these menus depends on the particular provider. Normally after a 
    station is changed, the provider broadcasting the digital teletext makes an intro-
    ductory offer for this service on the screen via menu selection. Follow these notes.
    If no message appears telling you how to switch to digital teletext after switching 
    to another station, press the TEXT key. If a selection for DVB subtitles is available, 
    this item must be hidden before.
    Depending on the provider’s respective offer, you can use the  buttons 
    and the OK button, the coloured keys, the END/TEXT button and sometimes 
    even the numeric buttons.
    If you want to close the digital teletext, just select a different station using the 
    P+/P– buttons or follow the menu prompts on the screen.
    Notes: 
    •  Digital teletext is not available when DVB subtitles are being displayed.
    •  If a timer recording is programmed at the TV-set, at the start time of the recor-
    ding the digital teletext mode is switched off automatically
    BA32789_021XelosModusRel_5_GB.in30   30BA32789_021XelosModusRel_5_GB.in30   3015.01.2007   16:56:3715.01.2007   16:56:37
     
    						
    All Loewe manuals Comments (0)

    Related Manuals for Loewe Concept L26 Operating Instructions