Loewe Art 47 Sl Operating Instructions

							21 -
Daily operation
With the favourites lists
You can save and call your favourite stations in 6 favourites lists (e.g. for 
multiple users). Each favourites list can contain up to 99 stations. After 
initial installation, 10 stations from the station list are already stored in 
the first list. Change the favourites list to suit your requirements (see Put  
together / change favourites lists on page 29).
➠ In normal TV mode, without other displays:
 OK  calls the station list.
Red button: Calls the favourites list.
Select station directly with numeric buttons. Or:
 Mark  stations.
P+/P– Scroll in the pages of the favourites list.
 Select other favourites list.
 OK The marked station is called.
➠  Other favourites lists can only be selected if these 
contain stations.
Red button:  Back to the station list.
Green button:  Scan all stations of the currently selected 
favourites list.
Yellow button: Change the Favourites lists, see page 29.
Explanation of the favourites lists:
The selection made with the red button (favourites list) is retained until 
you switch back to the station list with the red button.
If favourites are selected, the name of the favourites list appears in the 
status display after the station name after changing stations.
Explanation of the icons following station names:
 
						

							- 22
Daily operation
Adjusting the sound
Switching sound on/off
Sound off;
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– Volume louder / quieter.
The volume bar will be shown briefly if no other menu is 
displayed.
Call Sound adjustment
Call Sound adjustment.
Select sound adjustment by pressing several times.
or:

 Select sound adjustment.
Other sound settings in volume setting and sound adjustment
➠  As long as the volume bar or the selection of the sound 
adjustment is still visible:
 Call additional sound settings.

  Select sound setting,
   go to the menu line below.
  Make  changes.
Sound settings via the TV menu
➠ In normal TV mode, without other displays.
Call TV menu.
 Select Sound,
 go to the menu line below.
  Select desired sound setting,
   go to the menu line below.
  Make  changes.Explanations of the sound settings:
Playback over the TV speakers, active speakers, Loewe 
Auro, Loewe Individual Sound Projector or an external 
hi-fi amplifier. 
The selection active speakers, hi-fi/AV amplifier or Sound 
projector is only possible if these have been logged in in 
the audio component wizard. The Auro selection is only 
possible if a Loewe DVD Preceiver Auro is connected. 
The menu item Sound via does not appear if TV speak-
ers or TV speakers + active subwoofer is set in the audio 
components wizard.
Set sound effects Stereo, Panorama, 3D Surround. Pano-
rama gives the stereo sound a virtual base widening. 3D 
Surround converts a stereo signal into a virtual surround 
signal.
Speech, Classical, Pop, Custom music and film sound. You 
can set the treble and bass for music and movie sound.
Adjust the headphones volume.
Proper boost of bass and treble tones at low volume.
If the sound does not exactly match the picture, you 
can correct it here. If you move to the left in the bar you 
delay the sound in relation to the picture. If you move to 
the right you accelerate it in relation to the picture. The 
sound is adapted in time steps of 10ms each.
The Sound-picture synchronisation menu item only ap-
pears for DVB stations.
Call with OK (see next page).
Sound via
Sound effects
Sound 
adjustment
Headphone 
volume
Loudness
Sound-picture 
synchronisa-
tion
more ...
ENDSound adjustment Sound effects Volume
24Headphone vo
Classical Sound adjustment     ...
Speech off
Pop Custom music sound
 
						

							23 -
Daily operation
Explanations of the sound settings:
Selection possibility Mono/Stereo or Sound 1 or Sound 
2 for two-sound broadcasts separately for speakers and 
headphones. Only available with analogue stations.
Reduces volume differences, e.g. for advertisements that 
are too loud.
Sound selection for two sound broadcasts.
Determining the maximum volume that can be set.
Specify the volume that is set when switching on the TV 
set with the power switch.
If the volume is higher when switching the TV set to the 
standby mode than specified here, then it is reduced 
automatically to the fixed maximum switching on volume 
when it is turned on again.
The volume can differ according to the individual stations. 
If the sound is too loud or too quiet in relation to other 
stations, adapt the volume. When the menu is open, you 
can select the stations one after another with P+/P– and 
adjust every single station conveniently.
Set stereo balance so that the volume impression is identi-
cal on the left and right.
If the automatic speech detection is activated, the sound 
of the current programme is automatically output with 
optimum comprehensibility when speech is detected.
more ...
Loudspeaker/ 
Headphone
sound
Auto volume
AV output 
signal
Maximum 
volume
max. switch on
volume
Volume 
adjustment for 
current station
Balance
Auto speech 
detection
 
						

							- 24
Adjusting the picture
Call TV menu.
 Select Picture,
 go to the menu line below.
 Select the desired picture function,
  go to the menu line below.
  Make  changes.
Explanations of the picture settings:
  Switches the picture parameters between personal set-
tings and energy efficiency presettings.
Adjust contrast.
The power consumption of the TV set is directly depend-
ent on the value set here (see also page 14).
Adjust the colour.
Set warmer or colder tone for picture.
Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Call with OK.
Picture improvement on/off and demo mode for Image+
 
Active.
Set picture format (see right hand column).
Move picture vertically (see page 25).
Automatic detection and setting of the picture format for 
Cinemascope or widescreen movies.
Reduce jolting.
The TV picture adapts to the ambient brightness.
The energy consumption of the set is reduced by contrast 
reduction in a lower ambient brightness. The contrast 
and energy consumption increase with a high ambient 
brightness.
Daily operation
Presettings / Personal settings for picture adjustment
Call TV menu.
  Select Picture,
 go to the menu line below.
 Select Picture adjustment,
   go to the menu line below.
 Select Presettings or Personal settings.
  For presettings, go to the menu line below.
 Select the desired presetting for the picture.
 OK Confirm selection.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature, 
brightness, sharpness and digital noise control are saved in the Personal 
settings. Every signal source has its own personal settings.
By selecting Presettings the picture settings for the respective currently 
active signal source are set to predefined values.
For an explanation of the signal sources see glossary: Signal input groups.
In the index of the TV set, all the picture and sound adjustments can be 
reset to the factory values for all signal sources in one step under Reset 
picture/sound
 or Factory settings picture/sound.
Setting picture format
Press the Picture format button until the desired picture 
format is set or press
  to select the desired picture format.
The Panorama picture format can be set between 
proportionally correct and format filling display. Black 
bars are visible on the left and right of the picture in 
the proportionally correct display. 
Switch: Keep the M button on the TV pressed, at the 
same time, press the Picture format button on the remote 
control briefly. 
Reset: Press the same button combination again. Picture 
adjustment
Contrast
Colour intensity
Colour 
temperature
Brightness
Sharpness
DNC
more ...
Image+
 Active
Picture format
Move picture  
up/down
Auto format
DMM
Automatic 
dimmer
continued on next page 
ENDINFOPicture adjustment
Eco standard ...PictureTV menu
Presettings (TV digital)Personal settings (TV digital)
ENDINFOContrastColour tempColour intensity Picture adjustmentPicture TV menu
Presettings (TV digital)      ...
16:9Picture format
4:3 CinemaZoom
Panorama
 
						

							25 -
Daily operation
Explanations of the picture formats:
➠  The setting options depend on the transmitted picture 
content.
 16:9 Proportionally correct display of 16:9 broadcasts.
  4:3  Proportionally correct display of 4:3 broadcasts.
 Panorama Proportionally correct or format filling display (as-delivered 
state) of 4:3 broadcasts on the 16:9 screen. Station logo 
and subtitles remain visible. 
    See page 24 for switching the Panorama mode.
  Cinema  Proportionally correct, format filling display of 4:3 broad-
casts on 16:9 screens. Station logo and subtitles usually 
not visible.
  Zoom  Proportionally correct display. Maximum picture magni-
fication. 
  PALplus  Is a 4:3-compatible 16:9 picture broadcast supplied by 
the station which is detected automatically.
If a high resolution video signal is displayed on the TV set 
or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/
DVI, HDMI3/DVI or COMP. IN, the picture formats 16:9 
PC, 16:9 TV, 16:9 Zoom, 4:3 PC, 4:3 TV and 4:3 Zoom 
can be set.
In the PC formats, the complete picture content will be 
shown. In the TV formats a small part of the picture is 
cropped. This may be necessary to hide possible interfer-
ence at the edge of the picture, which arises from the 
signal supplied.
Move picture vertically
➠ In normal TV mode without other displays.
Move picture up/down.
To show subtitles or news tickers which have been cut 
off, the picture can be moved up or down in the picture 
formats Panorama, Cinema and Zoom (not with high 
resolution signal) with the arrow buttons .
➠  For TV sets with MHEG-5 software you can switch 
back and forth quickly between two stations using 
these buttons (see also on page 20).Operation without remote control
Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
 R Radio on or switch between TV and Radio.
Calling the TV menu on the set
 M Call Direct control on TV set menu,
– / + select function.
➠ Service is intended for the customer service.
M or R Go to the menu line below,
– / + make changes.
 M  Move up one menu line,
– / + select other function.
Brightness Volume Direct control on TV set
19Contrast Picture format Stat election
+2Move picture up/down
 
						

							- 26
Daily operation
Button functions
Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer 
and DR archive, if equipped with Digital Recorder) has its own menu and own 
functions for the coloured buttons. The function of the coloured buttons is 
shown at the bottom of the menus and wizards. Below, some of the function 
are listed which you need in TV mode for the daily handling of your TV set.
Functions of the coloured buttons in TV mode
➠  The coloured buttons do not work as described below 
for TV sets with MHEG-5 software, but they operate as 
described on page 37 (Digital Teletext).
Red button: Freeze on/off.
In sets with Digital Recorder: DR archive on/off.
For TV sets with MHEG-5 software you can open the DR 
archive via the menu Assist+
 (see page 17).
Green button: Open the Teletext functions menu.
You can select 
Subtitles and your Personal text pages via 
the Teletext functions menu. The operation of subtitles 
depends on the station selected.
Subtitles analogue stations:
 Select Subtitles,
 go to the menu line below.
 Select the size of the teletext subtitles,
 OK show teletext subtitles.
    (display only if subtitles are available)
END: Teletext subtitles off or select off in menu.
Subtitles DVB stations:
➠  If the DVB station does not provide any subtitles, the 
menu item Subtitles is greyed out and cannot be 
accessed with OK.
➠  The DVB subtitles can also be selected via the status 
display (see page 27).
 Select Subtitles,
 OK call.
 Select subtitle mode,
 OK show/hide subtitles.Functions of the coloured buttons in TV mode (Continuation)
Green button: Open the Teletext functions menu.
 Select Personal text pages,
 OK call.
 Select text page,
 OK view.
➠  If only one text page is defined, no list will be shown and 
the Teletext page will be opened immediately. To define 
your personal text pages, see page 37.
Yellow button: Go to the last viewed station.
Use this button to quickly switch back and forth between 
two stations. For MHEG-5 see page 18 or on this page at 
the right lower column.
Blue button: Show programme info.
The programme info of the following programme is 
displayed additionally for DVB stations. For MHEG-5, no 
programme info is available.
Explanation of the symbols in the programme information:
 
						

							27 -
Status display
➠ In normal TV mode, without other displays.
END: Show/hide status display.
For MHEG-5, INFO button.
You will see the number and name of the station and the 
title of the current broadcast (if available) and the sound 
identification in the top two lines.
The bar (if available) indicates the progress of the current 
programme.
If information about the current programme is available, 
this can be called with the INFO button, the button is 
displayed on the right in this case.
For MHEG-5, no programme info is available.
A selection (see right hand column), the time and, if acti-
vated, the alarm time and switch-off time appear at the 
bottom depending on the DVB station.
Explanations of the sound identification:
Transmitted audio signal:
 
						

							- 28
Managing stations
TV stations
Various options for managing stations are available via the TV menu. For 
example the description for TV stations. For radio stations the same applies, 
except that the Radio menu is called in Radio mode (see also page 38).
➠  Station management is not possible if a programmed timer recording 
is still pending.
➠  If at least one station is locked the access code must be entered before 
search/update (see Parental lock on page 43).
Search/update stations – Search wizard
In the search/update with the search wizard, new stations are searched 
for which have not yet been stored. 
➠  You have to repeat the initial installation (see page 13) 
and automatically search for new ones if you want to 
delete all the existing stations and automatically search 
for new ones. Do also use the first installation if you 
want to change to receiving MHEG-5 stations (attend 
restrictions for DVB software update, see page 40).
Call TV menu.
  Select Settings,
 go to the menu line below.
  Select Stations,
 go to the menu line below.
  Select Search wizard,
 go to the menu line below.
In the upper info text the current search settings will now 
be displayed:
If you want to change these search settings:
  Select Change search settings,
 OKwizard prompts search settings.
If you agree with these settings:
  Select Start search/update,
 OKstart search.
Red button: Abort current search/update.Explanations of some search settings, including the upgradeable satellite 
reception:
Select the country for country-specific defaults and sta-
tion sorting.
Here select antenna, cable, or satellite, depending on 
where you want to search for new stations.
Here you can also call a configuration of the DVB-T and 
DVB-S antennae with the green button (see page 14).
With selection of set location the conventional TV 
standard/colour standard is the default. This should only 
be changed if stations with other standards are to be 
searched.
You can state whether coded stations are to be searched 
for in the search/update. 
Select yes then coded stations 
are also searched for. However, these stations can only 
be received in connection with a CA module and the ap-
propriate Smart Card.
 Ask your dealer which Smart Card 
you need to receive certain stations. Handling of the CA 
module is described on page 42.
If you want to run the station search independently of 
the channel grid, select frequency search for the search 
method.
With the selection of set location the conventional set-
tings will be preset. Only change this if you know other 
symbol rates and modulation types or if you have to 
specify the network ID for your cable network (informa-
tion available from your cable network provider).
If you want to run the station search independently of 
the channel grid, select frequency search for the search 
method.
If you want to run the station search independently of 
the channel grid, select frequency search for the search 
method.
The symbol rate is specified by the satellite provider and 
normally does not need to be adjusted.
Start search/update Change search settings Search wizard TV menu
Settings
Stations Search wizard
Your TV carries out the update of the station range (search for new stations;
delete stations no longer broadcast) with the following settings:
Location of TV set         United Kingdom
Signal source           DVB-T
END
OK
Set location
Signal source
Antenna/cable:
TV/colour 
standard
Encrypted 
stations
DVB-T
Search method
DVB-C
Settings
DVB-S
Settings
 
						

							29 -
Search for/update stations – handling of new and no longer found stations
After the automatic search/update has been completed, the number of 
new found stations is displayed.
 OK  List of newly found stations.
Select station.
Yellow button:  Mark / unmark station
Blue button:  Mark / unmark all
 OK  saves the marked station.
Afterwards, if available, a list of the stations which are 
stored but temporarily not broadcasting or which no 
longer exist is displayed. 
The number of the used memory location is in front of 
the station. Please select the stations you want to delete 
permanently. 
Select station.
Yellow button:  Mark / unmark station
Blue button:  Mark / unmark all
 OK  deletes the selected stations.
END: Exit search wizard.Search/update station – manual search
Call TV menu.
  Select Settings,
 go to the menu line below.
  Select Stations,
 go to the menu line below.
  Select Manual adjustment,
 OKcall input box.
You can enter or edit the station data in the following 
lines:
Or:
Blue button: Starts Search and searches for next station.
Red button: Stores station.
➠  Only the stations for the selected signal source are 
stored which are not available in the station list.
➠  Stations which are already available for the selected 
signal source in the station list are displayed with grey 
shaded station number and name. These stations can 
only be overwritten with the red button. 
Explanations of some search settings:
Various settings are possible depending on the selected signal source. 
Some settings have already been explained in the initial installation (see 
page 13 onwards). 
Selection of the range in which you want to search for 
the station.
Direct input of the channel.
Direct input of the station frequency.
Input of the TV standard of the station,
(B/G, I, L, D/K, M, N). 
Ask your dealer in this regard.
Input of the colour standard of the station,
(PAL, SECAM, NTSC-V, PAL60, Autom.).
Ask your dealer in this regard.
Managing stations
ENDINFO
Manual adjustment
Signal source     Antenna/cable (analogue)       DVB-T    DVB-C     D
Channel       S21
Frequency      303.25 MHz
Name        KIKA
TV stand.       B/G
Col. standard     Autom.
Store
Search
Signal source
Channel
Frequency
TV stand.
Col. standard
Proceed


 Search wizard

						

							- 30
Change, delete, move, rename, restore station
➠  Change station can also be called via the station list (page 20).
➠  If at least one station is locked the access code must be entered before 
changing stations start-up (see Parental lock on page 43).
Call TV menu.
  Select Settings,
 go to the menu line below.
  Select Stations,
 go to the menu line below.
  Select Change stations,
 OKcall list of stations.
In this menu you can delete, move, rename or restore 
stations.
or numeric buttons:
Select the appropriate station.
Scroll with P+/P– if necessary.
Delete station
 
Red button: Starts Delete station.
Select several stations to be deleted if necessary,
 OK  to execute the delete.
Move station / Change order
➠  Not possible for MHEG-5 stations.
➠  Stations can only be resorted within the signal 
source block.
Yellow button: Starts Move station.
  mark several stations if needed,
 OK selection ended,
 Select insertion position from which the selected 
stations are to be inserted,
 OK  to execute the move.
Managing stations
Rename station
➠  Not possible for MHEG-5 stations.
➠  DVB stations which also transmit the station name 
cannot be renamed. In this case, the Rename function 
is hidden.
Blue button: Starts Rename station.
Under the 1st letter of the name you will see a line 
indicating the current input position.
Input position one character to the right (also for 
blanks).
Input position one character to the left (deletes the 
character).
Enter the letters one after another with the numeric 
buttons on the remote control. Like using a mobile phone 
keypad, press a numeric button until the desired charac-
ter appears. The available letters are printed respectively 
on the buttons. Different special characters can be 
selected with button 1.
Green button: Switch upper/lower case letters.
 OK to save new name.
Restore stations
Stations which have been deleted from the station list can be restored.
Green button: Starts Restore stations.
Select station,
 OK
station is restored.
The restored station is sorted in according to its signal 
source at the end of the respective signal block.
END
INFO
P+
P–OK
OK
Change stations
Restore deleted stations
3sat     
KIKA         
ZDF