LG Xh T5032x Owners Manual

							11
Adjust the lock settingsTo access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared. 
Rating –Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password –Sets or changes the password for lock settings. 
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code –Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 18.Adjust the others settingsPBC (Playback Control) –Playback control provides special navigation fea-
tures that are available on some disc. Select [On] to use this feature.
DivX(R) Registration –We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service. 
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registra-
tion code of the unit.
Semi Karaoke –When a chapter / title / track is fully finished, this function
shows the score in the screen with a fanfare sound. 
Available discs for the Semi Karaoke function: DVD discs / DVD Karaoke Discs 
[On]: When you finished singing a score will appear on the screen.
[Off]: Fanfare and score do not appears on the screen.
- This function operate on the DVD/CD mode. 
- The Semi Karaoke function is available only when a microphone is connected.
-  When you watching movies, “off ” the Semi Karaoke at the SETUP menu or
enjoy it without connecting the MIC if the fanfare or score appears during
changing a chapter.
Bit Rate –You can set the quality of the recorded file.
Setting the sound modeVSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic IIYou can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the vir-
tual sound or to change sound mode repeatedly.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
2Ch source
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows
and all programs encoded in Dolby Surround. The result is enhanced sound
field directionality that approaches the quality of discrete 5.1-channel sound.
[PL II MUSIC] mode: The Music mode is for use with any stereo music
recordings.
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode
except that the directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations from poor FM stereo
reception can otherwise cause disturbing surround signals from a logic
decoder. The ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
[ON STAGE] mode: Simulates a large Concert hall
[VIRTUAL] mode: 
Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers. Listeners may expe-
rience amazing virtual surround effects with their own multimedia play-
ers.
5.1Ch source
[VIRTUAL] mode: 
The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that
you listen to the sound simultaneously from the right and left speakers
and center speaker.
Set a pre-programmed sound fieldThis system has a number of pre-set surround sound fields. Select the one
which best suits the programme you are watching by pressing EQ repeatedly to
cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,
ROCK, JAZZ
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal
EQ regardless of Tag information.
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 11
 
						

							12Displaying Disc Information - more you can doYou can select an item by pressing vV and change or select the setting by
pressing bB.
Current title (or track) 
number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/total number of angles
Selected sound modeSymbol Used in this ManualAll discs and file listed below  MP3 files 
DVD and finalized DVD±R/RW  WMA files 
DivX files 
Audio CDs 
Playing a Disc or file - more you can doPlaying a DVD that has a menu  Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV b B to highlight an option. 
Press ENTER to select.Skip to the next/previous chapter/track  Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track. 
Press SKIP (.) twice briefly to step back to the previous chapter/track.Pause playback  Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-
back.Frame-by-Frame playback  Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.Playing repeatedly  Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [OFF]. 
ALL
DivX
DVD
ALL
ALL
DVD
ACD
DivX
WMA
DVD
MP3
ALL
Displaying Disc Information1Press DISPLAY: DISPLAY2Select a item: 
v
v 
 V
V
3Adjust the Display menu settings: 
b
bB
B
4To return the exit: DISPLAY
ON REMOTE
Playing a Disc or file
ON REMOTE
1Open the disc tray: (On unit: Z Z
)-2Insert a Disc: (On unit) -3Close the disc tray: (On unit: Z Z
)-
4Adjust the menu settings:
vV b B 
or Select a file from the menu:v v 
 V
V5Start the Disc playing:
B
PLAY
6To stop the Disc playing:x x
STOP
1/64/26D 1  ENG
   3/2.1CH1  KOR1/3
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 12
 
						

							13
Fast forward or fast reverse  Press SCAN (mor M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (mor M) repeated-
ly. Press PLAY (B) to continue play at normal speed.Selecting a subtitle language  During playback, press S-TITLE ( ) repeatedly to select a desired subtitle lan-
guage.Slow down the playing speed  While playback is paused, press SCAN (bbor BB) to slow down  forward or
reverse playback. You can change the various playback speed by pressing
SCAN (mor M) repeatedly. Press PLAY (B) to continue play at normal
speed. Watch and listen 1.5 times faster  Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5
times faster than normal playback speed. Bx1.5 will appear in the top right cor-
ner of the screen. Press PLAY again to return to normal playback speed.Viewing the Title menu  Press TITLE to display the discs title menu, if available.Viewing the DVD MENU  Press MENU to display the disc menu, if available.Starting play from selected time Searches for the starting point of entered time code. Press DISPLAY during
playback and select the time clock icon. Input the required start time in hours,
minutes, and seconds, and press ENTER. If you enter the wrong number, press
CLEAR to enter again.Last Scene Memory  This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEGWhen playing a disc or USB Flash Drive containing  with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLEChanging the character set to display DivX®
subtitle correctly  If the subtitle does not display properly during playback, press and hold S-
TITLE for about 3 seconds then press S-TITLE to select another language code
until the subtitle is displayed properlyDivX file requirementDivX disc compatibility with this player is limited as follows:
•Available resolution size: 800x600 (W x H) pixel
•The file name of the DivX subtitle is available by 45 characters.
•If there is impossible code to express in the DivX file, it may be displayed as
 _  mark on the display.
•If the number of the screen frame is over 30 per 1 second, this unit may not
operate normally.
•If the video and audio structure of recorded files are not interleaved, either
video or audio is outputted.
•If the name of movie file is different from that of the subtitle file,during play-
back of a DivX file, subtitle may not be display..
•MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”•Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), 
SubStation Alpha(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub)
SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt)
(Files (VobSub(.sub)) included with USB device is not supported)
•Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”
•Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”
•Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
•Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
•CD-R/RW, DVD±R/RW Format: ISO 9660 
•Maximum Files/Disc: Less than 999 (total number of files and folders)
DivX
DivX
DVD
DivX
DVD
DVDDVD
WMA
MP3
ACD
DVD
DVD
DivX
DVDALL
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 13
 
						

							14Creating your own program You can play the contents of a disc in the order you want by arranging the order
of the music files on the disc. The program is cleared when the disc is removed.
Select a desired music file then press PROG./MEMO. or select “ “ and then
press ENTER to add the music file to the program list. To add all music files on
the disc, select “ ” and then press ENTER. Select a music file from the pro-
gram list then press ENTER to start programmed playback.To clear a music file
from the program list, select the music file you want to clear then press CLEAR
or select “
”icon and then press ENTER. To clear all music files from the
program list, select   then press ENTER.
Displaying file information (ID3 TAG ) While playing an MP3 file containing file information, you can display the infor-
mation by pressing DISPLAY repeatedly.MP3/WMA music file requirementMP3/WMA compatibility with this unit is limited as follows:•File extensions: “.mp3”, “.wma”.
•Sampling frequency: 
within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
•Bit rate: 
within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
•CD-R/RW, DVD±R/RW Format: ISO 9660 
•Maximum Files/Disc: Less than 999 (total number of files and folders)Screen SaverThe screen saver appears when you leave the unit in Stop mode for about five
minutes. System SelectYou must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than
five seconds to be able to select a system VOCAL FADERYou can enjoy the function as karaoke, by rducing singer vocal of music in the
various source.( MP3/WMA/CD/ DTS/DD etc.) except for Karaoke mode.
- This function available to use only when a microphone is connected.
Press VOCAL FADER button then you can see “FADE ON”or “FADE OFF” on
the front display.
- This function supports for 2 channel or more.
Viewing photo files - more you can doViewing photo files as a slide showUse vV b Bto highlight ( ) icon then press ENTER to start slide show.
You can change slide show speed using bBwhen ( ) icon is highlighted.Skip to the next/previous photoPress SKIP (.or >) to view the previous/next photo.Rotate a photoUse vV b Bto rotate the photo in full screen mode.Pause a slide showPress PAUSE/STEP (X) to pause a slide show. Press PLAY (B)to continue the
slide show.Photo file requirementJPEG file compatibility with this unit is limited as follows:•File extensions: “.jpg”
•Photo size: Less than 2MB recommended
•CD-R/RW, DVD±R/RW Format: ISO 9660 
•Maximum Files/Disc: Less than 999 (total number of files and folders)
MP3
WMA
MP3
ACD
Viewing photo files
ON REMOTE
1Open the disc tray: (On unit: Z Z
)-2Insert a disc: (On unit) -3Close the disc tray: (On unit: Z Z
)-4Select a photo file:v v 
 V
V5Display the selected file in full screen: ENTER
6To return to the menu:x x
STOP
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 14
 
						

							Listening to the radio - more you can doLook for radio stations automaticallyPress and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-
matically and stop when it finds a radio station.Choose a preset number for a radio stationWhen storing a radio station, the preset number can be chosen. When the play-
er automatically shows a preset number, press PRESET -/+ to change it. Press
PROG./MEMO. to save your chosen number.Delete all the saved stationsPress and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on the
DVD receiver display. Press PROG./MEMO. to erase all saved radio stations.Improve poor FM receptionPress PLAY (B) (MONO/ST). This will change the tuner from stereo to mono
and usually improve the reception.
15
Listening to the radio1Turn the power on: POWER2Select either FM or AM:  FUNCTION3Select a radio station: TUN-/+
4To ‘save’ a radio station:Apreset number will show in the display.PROG/MEMO.
5To select a ‘saved’ station input the preset 
number:Up to 50 radio stations can be saved.PRESET-/+
6To confirm press:PROG/MEMO.Be sure that both FM and AM aerials are connected.
ON REMOTE
5.1ch ez Set-up1Connect
the unit’s OPTICAL IN jack to jack on 
optical out of your TV (or Digital Device etc.)
.:-
2Select the AUX OPT: 
To select the AUX OPT directly 
HT SPK
3Listen sound with 5.1ch speaker.:  -
4To escape from AUX OPT: FUNCTION or INPUTListen to sound from TV, DVD and Digital Device with vivid 5.1ch mode. 
Even in power off mode, if you press HT SPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 15
 
						

							16
Listening to music from your USB device -
more you can doCompatible USB Devices•Devices which require additional program installation when you have con-
nected it to a computer, are not supported.
•MP3 Player : Flash type MP3 player.The MP3 player requiring installation of a driver is not supported.
•USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0
is inserted in the the player, if operates at the same speed
as that of USB 1.1)
USB device requirement•Do not extract the USB device while in operation.
•To prevent data loss, back up all data.
•If you use a USB extension cable or USB hub, the USB device might not be
recognized.
•Adevice using NTFS file system is not supported. (Only FAT (16/32) file sys-
tem is supported.)
•The USB function of this unit does not support all USB devices.
•Digital camera and mobile phone are not supported.
•This unit is not supported when the total number of files is 1000 or more.
•If the connected USB device has two or more folders, a drive folder is dis-
played on the screen. If you want to move to the previous menu after you
select a folder, press RETURN.
Listening to music from your
USB device1Connectthe USB device to the unit using a USB cable (not supplied).:-2Select the USB function:  INPUT3Select a file from the menu: v v 
 V
V4Start your music playing:B
5Before disconnecting the portable USB 
device, change to any other function by pressing:FUNCTION or INPUT
6Remove the USB device:-
The advantage of connecting your portable USB player through the sys-
tem’s USB port is that the USB device can be controlled from the system.
ON REMOTE
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 16
 
						

							Recording  music from CD to your USB
device - more you can doRecord Audio CD source to USBOne track recording -If the USB recording is played during playback of the
CD, the only track would be recording into the USB
All track recording - If the REC button is pressed at the CD stop, all track
would be recording.
Program list recording - USB Records after selecting the tracks pressing the
PROG./MEMO. button if you want to record the track you want.When you are recording, look out for the following•When you start the USB direct recording, you can check the Recording per-
centage rate for the USB record on the display window during the recording.
•During the recording is no sound and not operate for volume .
•When you stop recording during playback, the file that has been recorded at
that time will be stored 
•If you disconnect the USB without STOP button while recording, the file can
not delete in the PC. 
•It is impossible to record from “ MIC IN”
•Playable USB REC. Bit rate : 96/128kbps (Refer to the SET UP page)
•During USB record can not operate Pause key for Audio CD only. 
•Card reader device can not be use for USB record.
•USB port of the unit can not be connected to PC. The unit can not be used
as a storage device.•If the USB can not record appears “NO USB”.“ERROR”,“USB FULL”, 
“NO REC” on the display window.
•File will be stored to CD_REC folder in a format “TRK-001.mp3”.
•In the state CD-G, DTS disc USB Record is not operated.
•If you record more 999 files on CD_REC folder appears “ERROR” on the
display.
•New files are numbered in numeric sequence. if the total number of the files
are more than 999, delete some or store  some in PC.
•External HDD,Card reader, Locked device and MP3 player is not supported.
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This equip-
ment should not be used for such purposes.
Be responsible 
Respect copyrights
17
Recording music from CD to
your USB device
ON REMOTE
1Connectthe USB device to the unit:-
2Select a mode (DVD/CD) in which you want to record:  FUNCTION
3Start the recording: z z
If you want to record desired music file in 
Disc to USB. Select a file after start the recording:v v 
 V
V 
 
andz z
4To stop a recording:x x
STOP
Listening to music from your
portable player1Connect the portable player by plugging the unit into PORT. IN on the front of the player.:-2Turn the power on:  POWER3Select the PORTABLE function:  INPUT
4Turn the portable player on and start it 
playing: -The player can be used to play the music from many types of portable
player
ON REMOTE
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 17
 
						

							18
Language CodesUse this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.Area CodesChoose a area code from this list.Language CodeAfar 6565Afrikaans 6570Albanian 8381Ameharic 6577Arabic 6582Armenian 7289Assamese 6583Aymara 6588Azerbaijani 6590Bashkir 6665Basque 6985Bengali; Bangla  6678Bhutani 6890Bihari 6672Breton 6682Bulgarian 6671Burmese 7789Byelorussian 6669
Chinese 9072
Language CodeCroatian 7282Czech 6783Danish 6865Dutch 7876English 6978Esperanto 6979Estonian 6984Faroese 7079Fiji 7074Finnish 7073French 7082Frisian 7089Galician 7176Georgian 7565German 6869Greek 6976Greenlandic 7576Guarani 7178
Gujarati 7185
Language CodeHausa 7265Hebrew 7387Hindi 7273Hungarian 7285Icelandic 7383Indonesian 7378Interlingua 7365Irish 7165Italian 7384Javanese 7487Kannada 7578Kashmiri 7583Kazakh 7575Kirghiz 7589Korean 7579Kurdish 7585Laothian 7679Latin 7665
Latvian, Lettish  7686
Language CodeLingala 7678Lithuanian 7684Macedonian 7775Malagasy 7771Malay 7783Malayalam 7776Maori 7773Marathi 7782Moldavian 7779Mongolian 7778Nauru 7865Nepali 7869Norwegian 7879Oriya 7982Panjabi 8065Pashto, Pushto  8083Persian 7065Polish 8076
Portuguese 8084
Language CodeQuechua 8185Rhaeto-Romance 8277Rumanian 8279Russian 8285Samoan 8377Sanskrit 8365Scots Gaelic  7168Serbian 8382Serbo-Croatian 8372Shona 8378Sindhi 8368Singhalese 8373Slovak 8375Slovenian 8376Spanish 6983Sudanese 8385Swahili 8387Swedish 8386
Tagalog 8476
Language CodeTajik 8471Tamil 8465Telugu 8469Thai 8472Tonga 8479Turkish 8482Turkmen 8475Twi 8487Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapük 8679Welsh 6789Wolof 8779Xhosa 8872Yiddish 7473Yoruba 8979
Zulu 9085
Area CodeAfghanistan AFArgentina ARAustralia AUAustria ATBelgium BEBhutan BTBolivia BOBrazil BRCambodia KHCanada CAChile CLChina CNColombia CO
Congo CGArea Code
Costa Rica  CRCroatia HRCzech Republic  CZDenmark DKEcuador ECEgypt EGEl Salvador  SVEthiopia ETFiji FJFinland FIFrance FRGermany DEGreat Britain  GB
Greece GRArea Code
Greenland GLHong Kong  HKHungary HUIndia INIndonesia IDIsrael ILItaly ITJamaica JMJapan JPKenya KEKuwait KWLibya LYLuxembourg LU
Malaysia MYArea Code
Maldives MVMexico MXMonaco MCMongolia MNMorocco MANepal NPNetherlands NLNetherlands Antilles  ANNew Zealand  NZNigeria NGNorway NOOman OMPakistan PK
Panama PAArea Code
Paraguay PYPhilippines PHPoland PLPortugal PTRomania RORussian Federation  RUSaudi Arabia  SASenegal SNSingapore SGSlovak Republic  SKSlovenia SISouth Africa  ZASouth Korea  KR
Spain ESArea Code
Sri Lanka  LKSweden SESwitzerland CHTaiwan TWThailand THTurkey TRUganda UGUkraine UAUnited States  USUruguay UYUzbekistan UZVietnam VN
Zimbabwe ZW
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 18
 
						

							19
TroubleshootingNo power
No picture
There is little or no sound
The DVD picture quality is poor
ADVD/CD will not play
Humming noise heard while a
DVD or CD is playing
Radio stations can’t be tuned in
properly
The remote control doesn’t
work well / at allThe power cord is disconnected.
The TV is not set to receive the DVD signal.
The video cables are not connected securely.
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
The audio cables are damaged.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is inserted upside down.
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
The disc is dirty.
The DVD receiver is located too close to the TV, causing feed-
back.
The antenna is positioned or connected poorly.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have
been.cleared(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path between the remote control
and the unit.
The batteries in the remote control are flat.Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the pic-
ture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals cor-
rectly.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc 
Insert a playable disc (check the disc type, colour system
and regional code).
Place the disc with the label or printed side facing
upwards.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see page 15 for details.
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
CAUSE
PROBLEMCORRECTION
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 19
 
						

							20
About the  Symbol Display
“  ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.Regional CodesThis unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
•Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play. 
•If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.CopyrightsIt is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista) 
Types of Playable DiscsDVD-VIDEO: Discs such as movies that can 
be purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be 
played in this unit
DVD+R: Video mode only 
Supports the double layer disc also
DVD+RW: Video mode only
Audio CD:
This unit plays DVD±R/RW and CD-R/RW that contains audio titles,
DivX, MP3,WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-
RW/CD-R cannot be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of the recording
device and authoring software. 
Logo
Type
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI licensing LLC.
HT503PH-XM_BUKRLLK_ENG_1182  6/24/08  10:21 PM  Page 20