LG Xh T5032x Owners Manual

Model: XH-T5032X(XH-T5032X, SH53PH-F/S/C/W)
Unique Features
P/NO : MFL56941182
5.1ch ez Set-upListen sound from TV, DVD
and Digital Device with vivid
5.1ch mode.Go to page 15
Full HD up-scaling
(1080p)View Full HD picture quality
with simple setup.Go to page 10
USB Direct Recording Record music from CD to
your USB device.Go to page 17
Portable InListen to music from your
portable device (MP3,
Notebook, etc).Go to page 17
The working life of  this product is 7 years since the date of purchase
Internet...

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is intended to alert...

3
Contents
Setting up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit  . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OSD Initial language settings  . . . . . . . . . . . . . . . . . . .9
Initial Setting the Area Code  . . . . . . . . . . . . . . . . . . . .9
Adjust the settings  . . . . . . . . . . . . . ....

4Setting up
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
c c 
 
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
the colour coding
:
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.Be careful of the followingBe careful to make sure children do not put...

5
Hooking up the unitaConnect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
bPlug the power cord into the power source.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one input for audio (mono),
connect it to the left (white)
audio jack on the unit.
SCART connection
Connect the TO TV jack on
the unit and your TV using
the SCART cable. 
AM/FM connection
AM - Connect the AM loop
aerial to...

6Hooking up the unit
Hooking up the unit - more you
can doResolution SettingYou can change the resolution for component video
and HDMI output. 
To change the resolution using setup menu to select
the desired resolution - Auto, 480i(576i), 480p(576p),
720p, 1080i, 1080p.Available resolution according to connection[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or
576p)
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i
(or 576i)
[VIDEO OUT]: 480i (or 576i)
[SCART]: 576iNotes on HDMI Out connection•If your TV...

7

 
 
 
 
 
 
 
 
a 

 
 
 
 
 
 
 
 
POWER: Switches the unit ON or OFF.FUNCTION : Selects the function (DVD/CD
, FM, AM)
INPUT :
Changes the input source
( AUX, AUX  OPT, TV-
AUDIO, PORTABLE, USB
)
SLEEP : 
Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
MUTE : Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.EQ 
: You can choose 6 (or 7) fixed...

8
Play/Pause, Function 
Press and hold down this button for
about 3 seconds then press repeat-
edly  to select other function.
Stop
Tuning (-/+)
Skip / Search
VSM
Selects the Dolby Pro Logic II
or Virtual sound.
Volume
Control the volume when using any function. Open/Close
DVD/CD Disc Drawer
PORT. IN port
The PORT. In port means you can connect
an audio device to play trough the surround
sound speakers.USB port
The USB port allows you can connect a 
memory device to your DVD player. 
Power
Turn the unit...

Adjust the settings - more you can doAdjust the language settingsOSD – Select a language for the Setup menu and on-screen display. 
There is displayed as “-” or other error mark on display when you
change OSD.
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle. 
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to...

10Adjust the display settingsTV Aspect – Select which screen aspect to use based on the shape of your TV
screen. 
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen. 
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen,...