LG Wd 14440fds Owners Manual

40
dding detergentA
• Main wash only ➔
• Pre Wash + Main Wash ➔
• Do not exceed the maximum fill line.
Close the dispenser drawer slowly.
Overfilling can cause early dispensing
of the fabric softener which could stain
clothes.
• Do not leave the fabric softener in the
detergent drawer for more than 2 days.
(Fabric softener could harden)
• Softener will automatically be added
during the last rinse cycle.
• Do not open the drawer when water is
supplied.
• Solvents(benzene, etc) are not
allowable.
1. The...

41
dding detergentA
• The detergent should be used according to the
instruction of the detergent manufacture.
• If too much detergent is used, too many suds
can occur and this will decrease the washing
result or cause heavy load to the motor.
• Use powder detergent only for the front
loading washer.
❇ If suds occur too much, pleas reduce the
detergent amount.
• Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
results, avoid...

42
unctionF
Recommended courses according to the laundry type
Cotton
Synthetic
Baby
Care
Delicate
Duvet
Quick 30
Rinse+
Spin
RefreshHand
Wash
/WoolColor fast garments
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear)
Polyamide, Acrylic, Polyester
Lightly soiled baby wear
Delicate laundry easily
damaged
“Hand wash” marked
delicate and wool laundry Cotton bedding with filling
duvet, pillow, blanket, sofa
cover with light filling
Colored laundry which is
lightly soiled fast...

43
ow to use washerH
• Press the Power(     )button to start.
• Press the Start/Pause(     )button.
• Initial condition
- Wash : Main wash
- Rinse: 3 times
- Spin : 
• 1600 rpm 
[WD-16440(5)FDS]
• 1400 rpm 
[WD-14440(5)FDS]
• 1200 rpm 
[WD-12440(5)FDS]
- Water temperature: 60˚C
- Program: Cotton
• Press the Power(     )button to start.
• Select the conditions which you want to
use, by pressing each button.
For selecting the each conditions, please
refer to the page44~page50.
• Press the...

44
ow to use washerH
Program
• 9 programs are available according to the
laundry type.
• Lamp will light up to indicate selected program.
• When Start/Pause button is pressed, the
Cotton program is automatically selected.
- By turning the Program dial, the program is
selected in order of  “ Cotton – Synthetic –
Delicate – Hand Wash/Wool – Duvet – Quick 30
– Rinse+Spin – Refresh – Baby Care”.
Regarding to the laundry type for each program
Please refer to the page42. 
1. Power
2. Initial Program
Power
•...

45
ow to use washerH
Start/Pause
• This Start/Pausebutton is used  to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press “Start/Pause” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB.The door will not open before 1 to 2
minutes when Pause is selected, 
or at the end of the wash cycle.
1. Start
2. Pause
• While the Detecting is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the...

46
ow to use washerH
Steam Wash
By pressing the Steam Wash button, Steam 
Function Can be selected.
When Steam Function is selected, Steam wash 
(        ) LED lights on.
Steam Wash is
• For tough stained clothes, underwear, or baby
clothes.
• Steam Wash is available with Cotton, Synthetic,
Baby Care program. 
Refresh cycle is fixed Steam wash.
• This option features upgraded washing 
performance with low energy.
• Do not load delicates such as wool, silk, and 
easily discolored clothes.
NOTE:
- Steam...

47
ow to use washerH
1. Normal
2. Rinse+
& Rinse++ 
3. Rinse Hold
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
• Cotton, Synthetic, Baby Care performs 3
Rinses
• Hand Wash/Wool, Quick 30, Delicate,
Duvet performs 2 Rinses
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse+
or Rinse++ 
function,
the Rinse Time and the Rinse water are
increased.
• Is selected by pressing the Rinse button
repeatedly. This function leaves...

48
ow to use washerH
Option
By pressing each the button, each function
will be selected.
2. Pre Wash
• Use this option for load that need
pretreatment. Add 16 minutes pre wash and
drain.
- When using Pre Wash option, do not use
liquid detergent in the main wash
comportment. Use powder for the main
wash.
• Available in Cotton, Synthetic and Baby Care
program.
3. Crease Care
• If you want to prevent crease, select this
button with spin speed. 
4. Medic Rinse
• For high effectiveness or more purity in...

49
ow to use washerH
Tub Clean
Tub Clean course can be set  by pressing
and holding Intensive and Pre Wash button
simultaneously.
When Tub Clean course is set, display 
“         ”, and all buttons are inoperable.
TUB CLEAN is special cycle to clean the
inside of the washer. This cycle uses higher
water level with higher spin speed. Perform
this cycle regularly.
How to use the Tub Clean cycle:
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti...