LG Wd 10164n Service Manual
Have a look at the manual LG Wd 10164n Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 27
26
Disassemble the top plate assembly.
Pull out the drawer to arrow direction.
Unscrew 2 screws.
The hose clamps and the hose are disassembled.
The ventilation bellows and the water inlet bellows are
disassembled on the tub.
DISPENSER ASSEMBLY
DISPENSOR ASSEMBLY DRAWER
downloaded/Zrom/Washing]achineP]anualKcom/]anuals](http://img.usermanuals.tech/thumb/47/55327/w64_lg_wd-10164n-service-manual-26.png "Page 27
26
Disassemble the top plate assembly.
Pull out the drawer to arrow direction.
Unscrew 2 screws.
The hose clamps and the hose are disassembled.
The ventilation bellows and the water inlet bellows are
disassembled on the tub.
DISPENSER ASSEMBLY
DISPENSOR ASSEMBLY DRAWER
downloaded/Zrom/Washing]achineP]anualKcom/]anuals")
![Page 32
31
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB
Take apart the cabinet cover clamp and release
the gasket.
Unscrew 2 screws holding the door lock.
Disconnect the door lock from the wiring connector.
Remove the heater.
Remove the foreign material (wire, coin and others) by
inserting a long bar through the hole.
downloaded/Zrom/Washing]achineP]anualKcom/]anuals](http://img.usermanuals.tech/thumb/47/55327/w64_lg_wd-10164n-service-manual-31.png "Page 32
31
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB
Take apart the cabinet cover clamp and release
the gasket.
Unscrew 2 screws holding the door lock.
Disconnect the door lock from the wiring connector.
Remove the heater.
Remove the foreign material (wire, coin and others) by
inserting a long bar through the hole.
downloaded/Zrom/Washing]achineP]anualKcom/]anuals")
Cap (Remaining Hose)ScrewPump Outlet Hose Tub Pump Bellows 30 Remove pump outlet hose. Remove tub pump bellows. Remove cap (Remaining Hose.) Disconnect the wiring. Unscrew 2 screws. Remove the pump. Loosen the M6 heater nut to pull out the heater. When mounting the heater, be sure to insert the heater into the heater clip on the bottom of the tub. Pull it out by holding the thermistor bracket. If it is pulled by the wire, it may be broken. When mounting the thermistor again, make sure that it is got back tight to the bushing. PUMP HEATER THERMISTOR CAUTION downloaded/Zrom/Washing]achineP]anualKcom/]anuals
31 SWITCH ASSEMBLY, DOOR LOCK WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB Take apart the cabinet cover clamp and release the gasket. Unscrew 2 screws holding the door lock. Disconnect the door lock from the wiring connector. Remove the heater. Remove the foreign material (wire, coin and others) by inserting a long bar through the hole. downloaded/Zrom/Washing]achineP]anualKcom/]anuals
10-1.THE EXPLODED VIEW OF CABINET ASSEMBLY 32 10. EXPLODED VIEW A151A153 A152 A150 A134 A485 A140 A480 A210
10-2 THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY 33 A450 F215 F430 F321 F320 F324 F220 F225
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY 34 K330 K111 F461 K122 K121 K332 K346 K342