LG Wd 10164n Service Manual

WASHING MACHINE
SERVICE MANUAL      
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE 
CORRECTLY BEFORE  OFFERING SERVICE.
website : http://www.LGEservice.com
e-mail : http://LGEservice.com/techsup.html
MODEL : WD(
M)
-
80150FB
WD(
M)
-
90150(
5)
FB
WD(M)-10150(5)FB/WD-10160(5)FB/WD-10164FB
WD(
M)
-
111 5 0(
5)
FB/WD-11151(6)FB/DWD-11151(6)FB/NWD-11151(6)FB
WD(M)-12150(5)FB/WD-12160(5)FB/WD-12164FB
WD(
M)
-
13150(
5)
FB/WD-13151(6)FB/DWD-13151(6)FB/NWD-13151(6)FB
WD-1025FB/WD-10150(5)F
CAUTION...

Jul. 2002 PRINTED IN KOREAP/No.: 3828ER3013D
downloaded/Zrom/Washing]achineP]anualKcom/]anuals  

CONTENTS
1. SPECIFICATION ............................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4  
3. PARTS IDENTIFICATION  ............................................................................................................ 6
4. INSTALLATION...

3  
1. SPECIFICATION
ITEM
POWER SUPPLY 220-240V~, 50Hz
PRODUCT WEIGHT 65kg
WASHING150W
SPIN (800rpm)300W
DRAIN MOTOR32W
WASH HEATER2000W 
WASH 45rpm
SPIN WD
(M)-
80150FB 400/500/600/800 rpm
WD
(M)-
90150(5)FB 400/600/800/900 rpm
WD(M)-10150(5)FB / WD-10160(5)FB / WD-1025FB / WD-10164FB400/600/800/1000 rpm
WD(M)-
11150(5)FB / WD-11151(6)FB / DWD-11151(6)FB / NWD-11151(6)FB400/600/800/1100 rpm
WD(M)-12150(5)FB / WD-12160(5)FB / WD-12164FB / WD-10150(5)F   400/800/1000/1200 rpm
WD(M)-
13150(5)FB /...

Jumbo drum
LG’s jumbo drum can wash about 40% more per load than
conventional washing machine. A bigger drum improves the
wash performance.
Protection against creases
With the alternate rotation of the drum, creasing in the laundry
is minimized.
More economical by Fuzzy Logic System
FUZZY Logic System detects the amount of load and water
temperature, and then determines the optimum water level
and washing time to minimize energy and water
consumption.
Child-Lock
The Child-Lock system has been developed...

2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature, 
selected washing temperature and laundry amount.
2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
When the water level reaches to the preset level the water supply is stopped, then the washing program proceeds.
Spinning does not proceed until the water in the tub reduces a certain level.
2-4.THE DOOR CAN NOT BE...

3. PARTS IDENTIFICATION
6
Cold (1EA) Wrench
Power plug
Control panel
Door
Lower cover
Adjustable feet
(For detergent and 
fabric softener)
Drawer
Drum
Lower cover cap
Drain plug
  If the supply cord is damaged,
  it must be replaced by the 
manufacturer or its service agents 
or a similarly qualified person in 
order to avoid a hazard.
Drain pump filter
Ti
m
e
 
S ime SaveCrease C
ease Car
are
ACCESSORIES
downloaded/Zrom/Washing]achineP]anualKcom/]anuals  

Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V, remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly  instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works OK or NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT INSTALL THE  APPLIANCE ADJUST THE 
BOLTSON FLAT AND FIRM SURFACE...

HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8   
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.Avoid connecting several electric devices, 
It may be the cause of a fire.
Avoid submerging the end of the hose.
downloaded/Zrom/Washing]achineP]anualKcom/]anuals  

TEST OPERATION
9
Connect the power plug toIn case of cotton program.      
the outlet.
Connect the inlet hose.   
Preparation for  Press the power button. Pressthe START/PAUSE
washing. button.
Press both Pre Wash and Time
Delay button simultaneously the
present temperature will be
displayed.Check if the drum rotates clockwise
and counterclockwise.Check if water is supplied through
the detergent dispenser.
Power off and  then power on.
Check if the door can be 
opened after Door Locklamp
turns off.
Turn...