LG W3000h Users Guide

							Make sure to read the Important Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
W3000H
User’s Guide
 
						

							A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be located at
a location where it is easy to operate.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. 
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
 
						

							A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2.Align the hooks on the Stand Body with the matching slots in the Stand Base.
3. Insert the hooks into slots.
Warning The tape and locking pin may only be removed from those monitors equipped  with a 
standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
Slot
Stand Base
Hook
Stand Body
 
						

							A4
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
4.Attach the monitor to the Stand Base by turning the screw to the right.   
Screw : Turn the screw by using the screw handle.
5.Lift and turn the monitor to face towards the front after the connection is 
made to the female part of the cable youre attaching.
6.Take the screw out by turning to the left to separate the monitor and Stand 
Base.
 
						

							100.0mm
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚                                                  Swivel  Range : 350˚
Ergonomic
You do not need to replace the Locking pin  after it is removed,  to adjust its height. 
It is recommended that in order to maintain an ergonomic and comfortable 
viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
When adjusting the angle of the screen, do not put your finger(s) in between 
the head of the monitor and the stand body. You can hurt your finger(s
).
Height Range : maximum 3.94 inch (100.0mm)
* Please be sure to       
remove the Locking 
pin to adjust the height.   
 
						

							A6
Connecting the Display
Using the Computer
1.First, make sure that the power on the PC, monitor and peripheral equipment are
off and then, connect as follows. 
2.Connect DVI-D signal cable      . When attached, tighten the thumbscrews to secure
the connection.
3.Insert the power cord       into the outlet. 
Wall-outlet type
Power Cord12
4.Touch the power button on the front of the
monitor to turn on the monitor.
1
PC
Varies according to model.
Signal Cable
DVI-D signal cable
Power button
2
 
						

							Connecting the Display
A7
Connecting the USB(Universal Serial Bus) Cable 
1.Connect the upstream port of the display to the downstream port of the USB compliant
PC or another hub using the USB cable. (Computer must have a USB port)
2.Connect the USB compliant peripherals to the downstream ports of the display.
NOTE
To activate the USB hub function, the display must be connected to a USB compliant
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of the connector at the cable
side matches the shape  at the connecting side.
Even if the display is in a power saving mode, USB compliant devices will function
when they are connected the USB ports(both the upstream and downstream) of the
display.
USB (Universal Serial Bus) is an innovation in connecting your different desktop peripherals
conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and
other peripherals to your display instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect a chain of up to 120 devices on a
single USB port; and you can “hot” plug (attach them while the computer is running) or unplug them while
maintaining the Plug and the Plug auto detection and configuration. This display has an integrated BUS-
powered USB hub, allowing up to 2 other USB devices to be attached it.
High Speed           Full Speed             Low Speed
Data Rate               480Mbps               12Mbps                  1.5Mbps
Power                       2.5W                     2.5W                      2.5W
Consumption  
(Max,each Port)     (Max,each Port)         (Max,each Port) 
3.The monitor’s USB terminal supports USB 2.0 and High Speed cables.
USB downstream Port x (4)Connect the cables from USB
compliant peripherals-such as 
mouse, memory stick or USB hard disk, etc.
USB upstream  Port x (1)
Connect to downstream connectors of desktop 
or laptop computers. (However, the computer 
must support USB and have the USB port.)  
 
						

							A8
Connecting the Display
To arrange the cables
Connect the power cord and the signal cable as shown in the figure and then fix them
to the cable holders 1 and 2.  
Cable Holder 1 
1.Please insert thecable holder1
into a hole. 2.Please put the power cord and 
the signal cable in the cable holder 1. 
3.Please put the power cord and the signal cable in the cable holder 2. 
While pressing the bottom of cable holder 2 with one hand, pull the top of 
it with the other hand as shown in the picture. 
Press 
Pull  
Cable Holder 2 
 
						

							A9
Touching the button to turn the power on and touch
the button again to turn it off. Power Button
Control Panel Functions
Front Panel Controls
45
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber.Power Indicator
Buttons
You can adjust monitor brightness to be lighter (     ) 
or darker (     ). When adjusting brightness, it will beep
once when you reach the maximum or minimum level. 
You can turn on or off the alarm ringing when adjusting
buttons while the power is on. 
Touch any button to check if the sound is on or off. If
sound is heard, it means the sound is on. If not, it means
the sound is off. 
You can turn Power Indicator on or off by touching the 
button lightly while the power is on. 
You can turn DFC function on or off by pressing two buttons at the same time for 
longer than three seconds. When DFC is turned on, the power indicator (blue light)
flickers once after the beep. When DFC is turned off, the indicator flickers three 
times after the beep. 
When DFC is on, if the  / buttons are not pressed at the same time, the 
brightness control function might be turned on. 
*What is DFC (Digital Fine Contrast) Function?After analyzing input signals, 
this product makes dark areas on the screen darker, providing greater contrast 
ratio to viewers. 
Buttons
Buttons