LG W3000h Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
W3000H
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which...

A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2.Align the hooks on the Stand Body with the matching slots in the Stand Base.
3. Insert the hooks into slots.
Warning The tape and locking pin may only be removed from those monitors equipped  with a 
standing base...

A4
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
4.Attach the monitor to the Stand Base by turning the screw to the right.   
Screw : Turn the screw by using the screw handle.
5.Lift and turn the monitor to face towards the front after the connection is 
made to the female part...

100.0mm
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚                                                  Swivel  Range : 350˚
Ergonomic
You do not need to replace the Locking pin  after it is removed,  to adjust its height. 
It is recommended that in order to maintain an...

A6
Connecting the Display
Using the Computer
1.First, make sure that the power on the PC, monitor and peripheral equipment are
off and then, connect as follows. 
2.Connect DVI-D signal cable      . When attached, tighten the thumbscrews to secure
the connection.
3.Insert the power cord       into the outlet. 
Wall-outlet type
Power Cord12
4.Touch the power button on the front of the
monitor to turn on the monitor.
1
PC
Varies according to model.
Signal Cable
DVI-D signal cable
Power button
2
 

Connecting the Display
A7
Connecting the USB(Universal Serial Bus) Cable 
1.Connect the upstream port of the display to the downstream port of the USB compliant
PC or another hub using the USB cable. (Computer must have a USB port)
2.Connect the USB compliant peripherals to the downstream ports of the display.
NOTE
To activate the USB hub function, the display must be connected to a USB compliant
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of...

A8
Connecting the Display
To arrange the cables
Connect the power cord and the signal cable as shown in the figure and then fix them
to the cable holders 1 and 2.  
Cable Holder 1 
1.Please insert thecable holder1
into a hole. 2.Please put the power cord and 
the signal cable in the cable holder 1. 
3.Please put the power cord and the signal cable in the cable holder 2. 
While pressing the bottom of cable holder 2 with one hand, pull the top of 
it with the other hand as shown in the picture. 
Press...

A9
Touching the button to turn the power on and touch
the button again to turn it off. Power Button
Control Panel Functions
Front Panel Controls
45
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber.Power Indicator
Buttons
You can adjust monitor brightness to be lighter (     ) 
or darker (     ). When adjusting brightness, it will beep
once when you reach the maximum or minimum level. 
You can...