LG W2220p Users Guide

20
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another
sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image...

21
On Screen Display(OSD) Selection and Adjustment 
SETUP
Main menu Sub menu Description
To choose the language in which the control
names are displayed.
To adjust position of the OSD window on the
screen.
If the output of the video card is different the
required specifications, the color level may
deteriorate due to video signal distortion. Using
this function, the signal level is adjusted to fit into
the standard output level of the video card in
order to provide the optimal image.
Activate this...

22
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power...

23
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your...

24
Troubleshooting
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
The Audio function is not working
Picture OK & No sound.• Check...

25
NOTE
Information in this document is subject to change without notice.
Specifications                                                      
22.0 inches (55.867 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
Visible diagonal size : 55.867 cm
0.282 x 0.282 mm (Pixel Pitch)Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector (Analog)
DVI-D Connector (Digital)
HDMI Connector...

26
Specifications
Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode
Indicator
On Mode
Sleep Mode
Off ModeRed
Red Blinking 
Off
LED Color
MODE
Display Modes (Resolution)Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8480P
576P
720P
720P
1080i
1080i
1080P
1080P31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.5060.00
50.00
50.00
60.00
50.00
60.00
50.00
60.00
HDMI VEDIO INPUT
1
2
3
4
5
6
7
8
9
10
11...

27
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
Wall mount plate (Separate purchase)- Be sure to use screws and a wall mount that meet VESA
standards.
- Using screws longer than those recommended might
damage the product.
- Using screws that do not meet VESA standards might
either damage the product or result in it coming away from
the wall.We will not be held responsible for any damage
resulting from failure to follow these...

Digitally yours