LG W2220p Users Guide
Have a look at the manual LG W2220p Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
20 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU: Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESSTo minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen. HORIZONTAL VERTICALTo move image left and right. To move image up and down.
21 On Screen Display(OSD) Selection and Adjustment SETUP Main menu Sub menu Description To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. (Only for D-SUB input) Removes noise that may occur at the edges of an image when HDMI is connected to an external device. When ON is selected, the image size is reduced to prevent noise. When OFF is selected, the original image size is maintained regardless of noise. (Only for HDMI input) Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will go off. If you set ONat any time, the power indicator will automatically be turned on. Adjusts the aspect ratio between wide screen (full screen) and 4:3 screen. •WIDE: Switch to full screen mode according to input image signal. •4:3: Change the input image signal ratio to 4:3. Restore all factory default settings except LANGUAGE. Press the , buttons to reset immediately. LANGUAGE OSD POSITION WHITE BALANCE OVERSCAN POWER INDICATOR 4:3 IN WIDE FACTORY RESET MENU: Exit : Adjust : Adjust SET : Select another sub-menu D-SUB input HDMI input WIDE4:3 NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the white balance function again. This function will be enabled only when the input is a D-SUB input.
22 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator red? Is the power indicator blinking? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button?
23 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
24 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The Audio function is not working Picture OK & No sound.• Check whether volume is 0. • Check sound muted. • HDMI cable installed properly. • Head phone cable installed properly. • Check sound format. Not supply to compressed sound format. Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? Have you installed the display driver?• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. • Make sure to check if the video card supports Plug&Play function.
25 NOTE Information in this document is subject to change without notice. Specifications 22.0 inches (55.867 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.867 cm 0.282 x 0.282 mm (Pixel Pitch)Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector (Analog) DVI-D Connector (Digital) HDMI Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital, HDMIVideo Input Max VESA 1680 x 1050 @ 60 Hz Recommend VESA 1680 x 1050 @ 60 HzResolution Plug&Play On Mode : 67 W(Typ.) Sleep Mode≤1 W Off Mode≤1 WPower Consumption With Stand Width 51.80 cm / 20.40 inches Height 43.55 cm / 17.15 inches (Min.) 54.55 cm / 21.48 inches (Max.) Depth 27.10 cm / 10.67 inches Weight(excl. packing) 6.70 kg (14.77 lbs)Dimensions & Weight Tilt -5˚~15˚ Swivel 355˚ Height 110 mm / 4.33 inchesRange DDC 2B Without Stand Width 51.80 cm / 20.40 inches Height 34.65 cm / 13.64 inches Depth 8.91 cm / 3.51 inches AC 100-240V~ 50/60Hz 0.9A Power Input Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironmental Conditions Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord
26 Specifications Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) *Recommend Mode Indicator On Mode Sleep Mode Off ModeRed Red Blinking Off LED Color MODE Display Modes (Resolution)Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8480P 576P 720P 720P 1080i 1080i 1080P 1080P31.50 31.25 37.50 45.00 28.12 33.75 56.25 67.5060.00 50.00 50.00 60.00 50.00 60.00 50.00 60.00 HDMI VEDIO INPUT 1 2 3 4 5 6 7 8 9 10 11 *12720 X 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1680 x 105031.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 64.674 65.29070 60 75 60 75 60 75 75 60 75 60 60 VGA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA
27 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. Wall mount plate (Separate purchase)- Be sure to use screws and a wall mount that meet VESA standards. - Using screws longer than those recommended might damage the product. - Using screws that do not meet VESA standards might either damage the product or result in it coming away from the wall.We will not be held responsible for any damage resulting from failure to follow these instructions. Kensington Security SlotConnected to a locking cable that can be purchased separately at most computer stores. 1. After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage. 2. Separate the head and the stand with the use of a screwdriver. 3. Install the Wall mount plate. < Screw Mounting Interface Dimension > Hole spacing : 100 mm x 100 mm