LG Television 19LE5300 User Manual

31
PREPARATION
CABLE HOLDER
CABLE HOLDER
2After connecting the ca\fles as necessary, 
install the CABLE HOLDER as shown 
and \fundle the ca\fles.
1Secure the power cord with the  CABLE 
HOLDER on the TV \fack cover. 
It will help prevent the power ca\fle from 
\feing removed \fy accident.
32/37/42/47/55LE5300, 42/47/55LE530C 42/47/55LE7300
19/22/26LE5300, 22/26LE5500
1After connecting the ca\fles as necessary, 
install the 
CABLE HOLDER as shown 
and \fundle the ca\fles.
1 Install the CABLE MANAGEMENT...

PREPARATION
PREPARATION
32
DESKTOP PEDESTAL INSTALLATION
SWIVEL STAND 
(Excep\f 19/22LE5300, 22LE5500)
After installing the TV, you can adjust the TV set manually to the left or right direction \fy 20 º to suit 
your viewing position.
ꔛ Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)!
?
!
?
CAUTION
► Ensure adequate ventilation \fy following the clearance...

33
PREPARATION
ATTACHING THE TV TO A DESK
(For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300)
 The TV must \fe attached to a desk so it cannot \fe pulled in a forward/\fackward direction, poten\b
tially causing injury or damaging the product. 
ꔛ Image shown may differ from your TV.
1\bScrew
 ( provided as parts of the product)
Desk
Stand
!
?
!
?
WARNING
► To prevent TV from falling over, the TV should \fe securely attached to the floor/wall per installa \b
tion instructions....

PREPARATION
PREPARATION
34
SECURING THE TV TO THE WALL TO PREVENT FALLING 
WHEN THE TV IS USED ON A STAND
 We recommend that you set up the TV close to a wall so it cannot fall over if pushed \fackwards. 
 Additionally, we recommend that the TV \fe attached to a wall so it cannot \fe pulled in a forward 
direction, potentially causing injury or damaging the product. 
 Caution: Please make sure that children don’t clim\f on or hang from the TV. 
ꔛ Insert the eye\b\folts (or TV \frackets and \folts) to...

35
PREPARATION
ANTENNA OR CABLE CONNECTION
ꔛ To prevent damage do not connect to the power outlet until all connections are made \fetween the 
devices.
ꔛ Image shown may differ from your TV.
1. An\fenna (Ana\bog or Digi\fa\b)
   Wall Antenna Socket or Outdoor Antenna without a Ca\fle Box 
Connections.
 For optimum picture quality, adjust antenna direction if needed.
2. Cab\be
Wa\b\b 
An\fenna  
Socke\f
Ou\fdoor 
An\fenna 
(VHF, UHF)
Cab\be TV 
Wa\b\b Jack
Mu\b\fi-fami\by Dwe\b\bings/Apar\fmen\fs...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
36
HD RECEIVER SETUP
ꔛ	To	prevent	the 	equipment 	damage\f 	ne ver 	plug 	in 	any 	po wer 	\b ords 	until 	y ou 	ha ve 	finished 	\b onne\bting 	all 	
equipment.
ꔛ	IThis	part	of 	E XTERNAL 	E QUIPMENT 	SETUP 	mainly 	us e 	pi\btur e 	o f 	f or 	2 6LE5300/26LE5500.
Y\f CB/PB\f CR/PR
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	of	the 	
digital	set-top 	bo x 	t o 	the 	COMPONENT  IN 
VI\fEO 
or	1/2* ja\bks	on 	the 	T V. 	Ma t\bh 	the...

37
EXTERNAL  EQUIPMENT  SETUP
HDMI Connection
1. How to connect
1Conne\bt	the	digital 	s et-top 	bo x 	t o 	H\fMI/\fVI IN 
1
\f	2\f	3*\f	or 	4** ja\bk	on 	the 	 TV.
\bNo	separate 	audio 	\b onne\btion 	is 	ne\b essary.
HDMI	supports	bo th 	audio 	and 	video .
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ	Sele\bt	the	H\fMI1\f	H\fMI2\f	H\fMI3*\f	or	H\fMI4 ** 
input	sour\be 	on 	the 	 TV 	using 	the 	INP\bT	button	
on	the...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
38
DVI to HDMI Connection
1. How to connect
1Conne\bt	the	D VI 	output 	o f 	the 	digital 	s et-top 	
box	to	the 	H\fMI/\fVI IN 1	or	2*	ja\bk 	on 	the 	T V.
\bConne\bt	the	digital 	s et-top 	bo x 	audio 	output 	t o 	
the	A\b\fIO IN (
RGB/\fVI )	ja\bk
	on 	the 	 TV.
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ		Sele\bt	the	H\fMI1	or	H\fMI2*	input 	sour\be 	on 	the...

39
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Component Input ports
To get better picture quality\f connect a DVD 
player to the component input ports as shown 
below.
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	 	of	the 	
DVD	to	the 	COMPONENT  IN  VI\fEO or	1/2* 
ja\bks	on	the 	T V. 	Ma t\bh 	the 	ja\bk 	\b olors 	(Y	=	
green\f	PB	=	blue\f 	and 	PR	=	red)
.
\bConne\bt	the 	audio 	output s 	o f 	the 	D VD 	t o 	the 	
COMPONENT  IN  A\b\fIO or	1/2* ja\bks	on	the 	
TV.
2. How to use
ꔛ	Turn	on...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
40
Composit\f (RCA) Conn\fction
1. How \fo connec\f
1Connect  the AUDIO/VIDEO  jacks  \fetween  TV 
and DVD. Match the jack colors (Video = yellow, 
Audio Left = white, and Audio Right = red)
2. How \fo use
ꔛ Turn on the DVD player, insert a DVD.
ꔛ Select  the  AV or AV1/2*  input  source  on  the  TV 
using the  INPUT \futton on the remote control.  
ꔛ Refer  to  the  DVD  player's  manual  for  operating 
instructions.
ANTENNA/
CABLE IN
DC-IN
RGB...