LG Projector PW600G User Manual

							61CUSTOMIZING SETTINGS 
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select TIME  
and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available time settings are described as follows.
ItemDescription
Sleep TimerTurns off the Projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto OffIf there is no input signal or button press, the projector automatically\
 
turns off after the preset time has elapsed. 
Automatic 
Standby
Turns off the projector automatically after a set period of time if there is 
no button input on the projector.
0037002C003000281BD20003
y
y 0036004F00480048005300030037004C0050004800550003
000300030003000300030003000300030003000300030003001D0003003200490049
y
y 0024005800570052
00030032004900490003 000300030003000300030003000300030003000300030003001D00030019001300030050004C00510011
y
y 0024005800570052005000440057004C00460003003600570044005100470045005C0003000300030003001D0003003200490049    
						

							62CUSTOMIZING SETTINGS 
WIRELESS Settings
* Available for the PW800G model only.
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
WIRELESS and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available wireless settings are described as follows.
ItemDescription
SCREEN 
SHARE
The SCREEN SHARE displays the screen of the connected device.
 yYou can check the SCREEN SHARE's ID.
Mode
GroupThis is the Group setting for each device supporting the 
SCREEN SHARE feature. When the wireless connection 
is weak or unstable, adjust the Group setting to correct 
the problem.
ChannelYou can change the channel used for wireless 
connections.
 ySearch Channels: Select channel searching methods.
-  Auto: The projector searches for available channels 
and automatically selects the least used channel.
- Manual: You can select a channel manually.
 yChannel: This is shown when Search Channels is set 
to Manual. It allows you to specify a channel number 
to use.
003A002C00350028002F0028003600361BD20003
y
y 00360026003500280028003100030036002B00240035002800030003000300030003001D0003003E0033002D003700350040003E002F002A00400033003A001B00130013003E00130013001300130040
y
y 002A0055005200580053
y
y 0026004B0044005100510048004F    
						

							63CUSTOMIZING SETTINGS 
INFORMATION
* Available for the PW600G model only.
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
INFORMATION and press the OK button.
The following are INFORMATION-related items.
ItemDescription
Model NameShows the model name of the product.
INPUTShows the current status of inputs.
?
?
002C0031002900320035003000240037002C003200311BD20003
y
y 0030005200470048004F0003003100440050004800030003
001D00030033003A001900130013y
y 002C003100330038003700030003
001D00030035002A0025001000330026    
						

							64CUSTOMIZING SETTINGS 
OPTION 1 Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
OPTION 1 and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available option 1 settings are described as follows.
ItemDescription
LanguageSelects a desired Menu Language.
3D ModeSelects 3D mode.
Auto Input 
Search
Automatically searches for and displays the input signal type 
when it is received. It is available only with external inputs  
(RGB-PC, HDMI, AV, and Component).
DivX(R) VODSets DivX related settings.
Initial SettingResets all the projector settings to the factory default.
Do not turn off the power during initialization. 
Mode SettingSelects Standard or Store Demo. 
When in use in home, please select Standard.  
Store Demo mode is for store display.
003200330037002C0032003100031BD20003
y
y 002F00440051004A00580044004A0048
y
y 0016002700030030005200470048
y
y 00240058005700520003002C0051005300580057000300360048004400550046004B000300030003001D0003003200490049
y
y 0027004C0059003B000B0035000C0003003900320027
y
y 002C0051004C0057004C0044004F00030036004800570057004C0051004A
y
y 003000520047004800030036004800570057004C0051004A0003
0003000300030003000300030003000300030003001D000300360057004400510047004400550047    
						

							65CUSTOMIZING SETTINGS 
OPTION 2 Settings
1 Press the SETTINGS button.
2 Use the , , , or  button to select 
OPTION 2 and press the OK button.
3 Use the , , , or  button to set up the 
desired item and press the OK button. 
-   
To return to the previous menu, press the  
button.
4 Press the EXIT button when completed.
The available option 2 settings are described as follows.
ItemDescription
KeystoneTo prevent the screen image from becoming trapezoidal, 
Keystone adjusts the top and bottom width of the image if the 
projector is not set at a right angle to the screen.
Auto KeystoneAuto Keystone provides a rectangular screen image by 
automatically adjusting the Keystone number when there is a 
trapezoidal screen image caused by tilting of the projector.
Item
OnAutomatically adjusts the Keystone number.
OffManually adjusts the Keystone number.
PJT ModeThis function turns the projected image upside down or flips horizontal.
 ySelect Rear when projecting from the back of the transparent 
screen purchased separately.
 ySelect Front Ceiling when installing the product on the ceiling.
 yWhen PJT Mode is Rear/ Front Ceiling, the left/right of the 
speaker changes automatically.
High AltitudeIf the projector is used at an altitude higher than 1200 meters, 
turn this on.
Otherwise, the projector may overheat or its protection function 
may be activated. If this happens, turn the projector off and then 
on again after waiting for several minutes.
Blank ImageSelects a background for blank Image.
003200330037002C0032003100031BD20003
y
y 002E0048005C005600570052005100480003
0013000300100003000E
y
y 00240058005700520003
002E0048005C00560057005200510048000300030003000300030003000300030003001D000300320051
y
y 0033002D0037000300300052004700480003000300030003000300030003000300030003000300030003000300030003001D000300290055005200510057
y
y 002B004C004A004B00030024004F0057004C005700580047004800030003000300030003000300030003
0003000300030003001D0003003200490049
y
y 0025004F00440051004E0003002C00500044004A00480003000300030003000300030003000300030003000300030003001D00030025004F00580048
y
y 0024005800570052000300330052005A0048005500030003000300030003000300030003000300030003000300030003001D0003003200490049
y
y 00360048004F004900030027004C0044004A005100520056004C0056    
						

							66CUSTOMIZING SETTINGS 
ItemDescription
Auto PowerMakes the projector turn on automatically when the adaptor plug 
is inserted.
Item
OnWhen the AC/DC plug is connected to the 
projector, it turns on automatically.
OffWhen the AC/DC plug is connected to the 
projector, it goes into standby mode.
Self DiagnosisTroubleshoots functional problems that can arise while using the 
product.  
						

							67CONNECTING DEVICES 
CONNECTING DEVICES
You can connect various external devices to the projector.
HDMI - page 68
Component - page 69
Composite (AV) - page 69
RGB - page 71
USB Device - page 31
Headphone - page 73
Mobile Phone (MHL/Slimport) - page 74
Computer/NotebookVideoDVD
Digital Device
USB
HeadphonesGame Console
Mobile Phone  
						

							68CONNECTING DEVICES 
Connecting to HD 
Receiver, DVD, VCR 
Player, or External 
Devices
Connect an HD receiver, DVD, VCR 
player, or External Devices to the 
projector and select an appropriate input 
mode.
HDMI Connection
With an HDMI cable, you can enjoy high 
quality picture and sound. 
Using a HDMI cable, connect the 
 port of the projector to 
the HDMI output port of the device 
to connect. Both video and audio are 
output at the same time. 
Press the INPUT button on the remote 
control to select HDMI. 
0003000300030003002B00270030002C0003
*  Optional 
Extras
HDMI to DVI Connection
Using an HDMI to DVI cable, connect 
the projector's  port to the 
DVI OUT port. 
To output audio, use an audio cable for 
connection.
Press the INPUT button on the remote 
control to select HDMI. 
DVI OUTAUDIO OUT
*  Not 
provided
*  Optional 
Extras    
						

							69CONNECTING DEVICES 
AV Connection
Connect the output ports of an external 
device and the AV IN ports of the 
projector using an AV cable. Press the 
INPUT button on the remote control to 
select AV. 
Check whether cables of the same color 
are connected properly.
0024001200390003003200380037000B002F004800490057000C
000B0035004C004A004B0057000C
002400380027002C00320003003200380037
YELLOW
YELLOW
YELLOW
WHITE
WHITE
WHITE
RED
RED
RED
Component Connection
You can enjoy a video by connecting the 
Component port of an external device to 
the RGB IN port of the projector. Press 
the INPUT button on the remote control 
to select Component.
Check whether cables of the same color 
are connected properly.
002400120039000300320038 0037000B002F004800490057000C003C0033002500330035000B0035004C004A004B0057000C
002400380027002C00320003003200380037
RED
RED
RED
BLUE
BLUE
BLUE
GREEN
GREEN
GREEN
WHITERED
0024001200390003003200380037000B002F004800490057000C 000B0035004C004A004B0057000C
002400380027002C00320003003200380037
WHITE
WHITE
RED
RED
YELLOW
* Optional
Extras
(Video)
*   Not 
provided
* Accessories* Accessories
(Audio)
* Optional
Extras
(Video)
* Not 
provided 
(Audio)    
						

							70CONNECTING DEVICES 
Connecting a PC
The projector supports Plug & Play. Your 
PC will automatically detect the projector 
and requires no driver installation.
HDMI Connection
Using an HDMI cable, connect the 
 port of the projector to the 
HDMI output port of your PC. Both video 
and audio are output at the same time. 
Press the INPUT button on the remote 
control to select HDMI. 
0003000300030003002B00270030002C0003
*  Optional 
Extras
HDMI to DVI Connection
Using an HDMI to DVI cable, connect 
the projector's  port to the 
DVI OUT port. 
To output audio, use an audio cable for 
connection.
Press the INPUT button on the remote 
control to select HDMI. 
DVI OUTAUDIO OUT
*  Not 
provided
*  Optional 
Extras